You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
He did a few more runs after these and was able to get rid of the little dip in the mid-range hp.
Hi Jsparks. Which A/F graph goes with the 687/617 run? I ask because the upper A/F, if the car is stock with a stock Paxton kit, is on the lean side and you may experience pinging under certain conditions. The lower A/F graph looks good.
The graph titled "Supercharged Viper2: BoostP" is similar to mine but the A/F you are running to get it is a bit leaner if the top green line is the Viper2 A/F. If the bottom green line is the A/F, I'd say you are in great shape. The Paxton power comes on more gradually than the Roe. I used to have an 8lb Roe on a GTS ( The system was installed by Sean and looked incredible). The car had over 500 foot pounds of torque at 1800 RPM. It was a blast but I like the better driveability and all weather reliability of the Paxton. I had to use different cards in the VEC II depending on the outside temperature to avoid pinging. My SRTC has the stock headers and Corsa cat back with stock cats. I think a key strategy with the Paxton is, after launch ( which I do at about 1500 RPM and roll into the throttle), do not shift too early since the power band is higher up on the curve.
Thou shall not drive in a spirited manner on old or cold tires.
We had problems getting good boost out of the paxton. Does the curve look in line with what you other paxton guys are getting?