proper place front emblem

ComanderDE

Viper Owner
Joined
Jan 21, 2014
Posts
2
Reaction score
0
Does anyone have the correct mass or could measure the length from top of the bumper to the emblem? Its a 94"

On many photos it appears often differ;)


Many thanks!

comander
 
Last edited:

redtanrt10

Enthusiast
Joined
Oct 21, 2006
Posts
1,726
Reaction score
55
Location
Dana Point CA
My scanners down but I grabbed the factory service manual, page 23-6 body

Book says to;

"apply a piece of masking tape to the fascia so the bottom edge of the tape is 83 mm (3.3 in.) below the top edge across the center of the fascia" Also, "mark the center line of the fascia on the masking tape with ink pen"

Short version, top of the emblem goes 3.3 in. below the top of the fascia, make sure you center it. good luck, Mike
 

GRANGER73

Enthusiast
Joined
Dec 26, 2007
Posts
513
Reaction score
16
Be careful. If you are considering originality, the front and back are different sizes.
 
Top