Purchased my first viper and the dealer sold me a blown motor

Viper1994

Enthusiast
Joined
Apr 22, 2015
Posts
3
Reaction score
0
Hi all

I purchased my first viper a 1994 model and the dealer that sold the car apparently did not tell me the motor was bad. I was driving down i76 and the motor broke the number 7 rod. Being I'm not that mechanical does anyone have any leads on where to find a complete long block? Is this something I'm going to have to get used to? My viper has 37k miles

I also would also like to find some factory wheels

Thank you David
 

Nsane1

Enthusiast
Joined
Nov 8, 2000
Posts
1,153
Reaction score
0
Location
Dallas, TX US
Welcome to the world of Viper ownership, too bad your first post and first experience is not perfect...

I don't think you are going to find a Gen 1 long block... If you have just broken the rod, and not damaged the cylinder/block, you should be able to get it rebuilt. There are many trusted motor guys Arrow being the first I would call (in addition to calling the dealer who sold you the car). Not sure where you are located, but there's a reputable shop in AZ that does lots of Viper motors in addition to Arrow.

As to your "get used to it" comment, DO NOT DRIVE THE CAR. So please do not get used to it, if you crater your block, you could be in for some serious hurt.

The original 3 spoke wheels are pretty rare, if that's what you are looking for, there are usually some on ebay, and on the classifieds there is newer stuff. Most get off the factory wheels, for newer stuff, and used ones are pretty available (I think there are some in the classifieds). Ebay is a good source as well, as is partsrack, and VPA might have a few wheels left, but I think they are all gone...

Please let us know how we can help more, and I hope it gets better for you. FYI, a friend of mine just went through this on a gen 2, in total it cost 16k, he had some upgraded compnents, and used the original block, but just pointing out that this is unfortunately not cheap. Luckily this is pretty rare...
 

denniskgb

Enthusiast
Joined
Sep 25, 2012
Posts
1,671
Reaction score
1
Location
Sewell, NJ
That really *****. Sorry for your first experience. Did you get any type of warranty from the dealer?
 
OP
OP
V

Viper1994

Enthusiast
Joined
Apr 22, 2015
Posts
3
Reaction score
0
No warranty. It's ok. I'm just trying to find a motor to install. I don't have 16000 for a rebuild. Yikes. Is my broken motor worth anything
 

DaJerseyViper

Enthusiast
Joined
Oct 8, 2014
Posts
337
Reaction score
1
The OP couldnt be more vague if he tried. How do you know you broke a rod? Is it sticking out of the side of the block? Usually a broken rod cruising down the road is due to 2 things 1) low/no oil 2) hrdrolocking the motor

You may have some recourse if you can prove they sold you a mechanically defective car that they knew was broken or leaking massive amounts of oil.
 

cigar

Enthusiast
Joined
Mar 1, 2015
Posts
65
Reaction score
0
The OP couldnt be more vague if he tried. How do you know you broke a rod? Is it sticking out of the side of the block? Usually a broken rod cruising down the road is due to 2 things 1) low/no oil 2) hrdrolocking the motor

You may have some recourse if you can prove they sold you a mechanically defective car that they knew was broken or leaking massive amounts of oil.

I've got to agree, I threw a rod in an airplane and was able to get it back on the ground but it was barely turning over, I also threw a rod in a '78 Chevy 3/4 ton and I threw parts all over the freeway.
 
OP
OP
V

Viper1994

Enthusiast
Joined
Apr 22, 2015
Posts
3
Reaction score
0
I unfortunately have no resources to go after the dealer. It's ok. I just need to find a motor.
 

TurboDrummer

Enthusiast
Joined
Apr 19, 2015
Posts
5
Reaction score
0
I unfortunately have no resources to go after the dealer. It's ok. I just need to find a motor.

How do you not have the resources, which I assume you mean is cash, to go after a dealer but you do to buy a new motor? If I bought a car of that value and drove it down the street and the motor blew, I'd be dropping it off......in their showroom.....through the window....
 

AZTVR

Enthusiast
Joined
Aug 28, 2005
Posts
3,043
Reaction score
7
Location
Chandler AZ
Is this something I'm going to have to get used to?

Is "what?" something you are going to have to get used to? Blowing up a motor? Depends on how you drive or what the service history is of the cars you buy. It is pretty unusual for a Viper. So, you believe that the dealer knowingly sold you a car with a bad motor? I wouldn't be surprised; but, how do you know he knew? Is it a pretty reputable dealer with a full shop, or just a corner lot that buys auction cars and sells them?

***** that it happened, though. Like said above; tell us where you live and maybe we can direct you to a reputable shop.
 

Vipermann1

Enthusiast
Joined
Nov 16, 2000
Posts
319
Reaction score
0
Location
Northridge, CA
I would recommend calling Dan Cragin and getting his opinion and an estimate. No better Viper tech than him!!!!
H worked on my Viper and it lasted 106,000 miles!!!! ... See my post.
 

agentf1

Enthusiast
Joined
Dec 27, 2001
Posts
2,608
Reaction score
0
Location
Phila Suburbs
Sounds like you may be in Philly area from driving down i76 (just guessing). If so contact Fran at RPM in Delaware, he s primarily a ls motor guy but dres Vipers too and is very good and trustworthy.
 

Dom426h

Enthusiast
Joined
Oct 26, 2007
Posts
2,632
Reaction score
0
Location
DE
Agent,
I live in DE and havnt heard of that place.
What is the full business name and/or address/website so that i can check em out.
 

Free2go

Enthusiast
Joined
Aug 11, 2013
Posts
3,290
Reaction score
6
he s primarily a ls motor guy but dres Vipers too and is very good and trustworthy.

Is there a psychologist in the VCA that can help me with something?:
I don't really trust anyone who owns a Viper to work on my car unless I'm present, and I trust no one to be near my Viper that doesn't own a Viper. If you're a psychologist that owns a Viper, I'd appreciate your feedback...but in the back of my mind I'll probably believe you're full of $hit.
 

Mopar Steve

Enthusiast
Joined
Oct 27, 2000
Posts
2,871
Reaction score
0
Location
Newark DE
agentf1:3268673 said:
Sounds like you may be in Philly area from driving down i76 (just guessing). If so contact Fran at RPM in Delaware, he s primarily a ls motor guy but dres Vipers too and is very good and trustworthy.

He does amazing work with Corvettes, and does our Vipers as well. I also give RPM a thumbs up.
 

Latest posts

Forum statistics

Threads
153,644
Posts
1,685,207
Members
18,220
Latest member
ROIII
Top