Roe Clutch Pedal Link Mod

[Grisoman]

I know the link is mainly to align the clutch and brake pedal heights, but I'm most interested in its ability to shorten pedal throw. For those who have done this mod, is pedal travel noticeably affected?

Thanks!

 

[Dom426h]

According to the ROEracing website:

"Improves the clutch motion ratio, resulting in shorter pedal throw and faster clutch actuation. The clutch pedal is also lowered by more than 1" so that it matches the height of the brake pedal. Does not fit 1996 RT/10's."

http://www.roeracing.com/ProductCart/pc/viewPrd.asp?idproduct=63&idcategory=156#details

 

[ViperTony]

It makes a noticeable difference. I did a write up on this a while back: http://forums.viperclub.org/threads/612355-Roe-Clutch-Lowering-Kit-Guide-amp-Photos?highlight=clutch

 

[plumcrazy]

very noticeable. one of the first mods i eve did. its worth it

 

[GTS Bruce]

Stock is ok since you will get used to it. I never give it a thought. If it really bothers you change it out.

 

[Grisoman]

Your feedback was appreciated; thanks!

 

[KNG SNKE]

Just bought one after this post. Gonna try it.

 

[Jack B]

That bushing is tricky to remove - good luck with it.

 

[ViperTony]

That bushing is tricky to remove - good luck with it.

This is VERY true. I don't remember if I mentioned this in the write up but I later found that removing the knee bolster panel made it much easier to see the bushing while removing it. Godspeed!

 

[Jance GTS]

I found a similar one from Daves site as well.

http://www.davesbigbrakes.com/www.davesbigbrakes.com/Engine_%26_Transmission/Pages/Clutch_Lowering_Rod.html#1

I'm only 5'9" is there a way to move all the pedals even closer to me? I've got them as close as I can get to me without having to move the seat up to close to the steering wheel. I would like to move my seat back all the way, which is about 1 click away. Any ideas?