Roll Bar

[Jasone]

Looking for suggestions on a roll bar for an SRT. I don't really like the autoform and looking for other options.

any suggestions?

 

[viperbob]

See what Jon B. has at Parts Rack.

 

[SylvanSRT]

mine came from JonB www.partsrack.com there is one from another company out there i have seen pics of but have no idea who makes it

 

[Kenny]

Dan Cragin @ DC performance makes one.

 

[Viper X]

Autoform makes a nice one for the SRT-10.

You can get on custom made for the SRT-10 or SRTC from DC.

Dan

 

[SylvanSRT]

not sure whose car or rollbar this is, it was posted somewhere (here or the alley)

and mine(Autoform)

 

[EXHLR8N]

Hi SylvanSRT,

I have the 2003 Black Viper in the picture. The roll bar is made for Dan Cragen at DC Performance by a local manufacturer. It bolts all the way through the frame (additional stiffness) and is slightly tilted forward for clearance for the top.

You can have it chomed, powdercoated any color or even covered with leather.

Bruce

 

[Jasone]

I'm a little far away to visit Da nat DC. I don't like the autoform due to having to replace the speaker panel. I've seen a job that didn't turn out real well.

I'll call JonB thanks.

 

[Autoformsteve]

Jasone,
There are some great installers in Florida that should be able to help you. Give me a call and we can figure out which one works best for you.

 

[SCLSSRT10]

Jasone, having owned this first SRT10 with an Autoform roll bar installed for use at Viper Days, I would highly recommend thier part. Just because you saw ONE installation that didn't look so good don't judge the the part or the company by just one experience. Autoform offers two different parts, one where the cross piece is above the rear header panel( which is the one I had and highly recomend, second has the cross piece below the header panel). The second offers better visibility in the rear view mirror but the first will offer the best latteral roll over protection. The choice is up to you but you can not go wrogh with the Autoform roll bar. They have been making them the longest and I think they make the best roll bar available.

Beleive me when I say I have taken my life safetly to the highest extreme when it comes to driving an SRT10 on race tracks. Mine was the first SRT10 at Viper Days and I still continue to play at Viper Days events and take safetly very seriously. If you are going to play with these amazing cars on race tracks you owe it to yourself and your family to be as safe as possible.

If you have any specific question or concerns send me a PM with your phone number and I will call you to discuss and concerns you might have.

Steve

 

[Viper X]

I have the Autoform bar (pictured above in the Silver SRT) in my black SRT-10. It came with a rear panel that replaced the stock unit and looks very good as an assembly.

As ACLSSRT10 says, don't judge the product by one lousy install. I don't track this car but do occasionally run it at the drags or the Silver State. I also have a hardtop for the car. I take safety pretty seriously too, as we all should.

Dan

 

[Jasone]

Thanks for comments. I guess I'll give the Autoform a shot.