RSI Grand Opening - Houston VCA Dyno Day (Pics)

[houstonT]

First of all, I would like to say THANK YOU to Racing Solutions (RSI - www.racingsolutionsinc.com) for their hospitality and their generosity. RSI opened up their place of business for the Houston VCA and hosted a FREE dyno day for us! In addition, they used this event as an opportunity to showcase their new beautiful facility by way of a Grand Opening. They also came out of pocket on Jason's Deli food, and provided drinks to all of us. SOOOOOOOO, THANK YOU RSI, a bunch of classy folks, we appreciate it!!!

We had GREAT turn-out and had over 100 people show up today! Thank you all for the support of RSI and the Houston VCA, the club is alive again!!!!!

Now, onto the fun, we dyno'ed a total of 23 cars (4 we dyno'ed twice b/c of heat soak, i'm listing below their highest numbers), attached you will find a picture of every car we dyno'ed, as well as their RWHP and RWTQ numbers. Let me pre-face this post by saying that is was HOT and HUMID today, all of the cars were down on power today and heat soak played a major role... The AVERAGE RWHP was 567 rwhp and the average RWTQ was 555 rwtq!

Dyno 1 - Jim Boeker - Viper with Paxton Supercharger - 655 rwhp and 616 rwtq

You must be registered for see images

Dyno 2 - Glen Maxwell - Viper stock - 370 rwhp and 425 rwtq

You must be registered for see images

Dyno 3 - Glenn Edgecomb - Viper stock - 381 rwhp and 452 rwtq

You must be registered for see images

Dyno 4 - Albert Chlouber - Viper RSI stroker motor - 572 rwhp and 574 rwtq

You must be registered for see images

Dyno 5 - Steve Nguyen - Supra stock twin turbo's - 436 rwhp and 434 rwtq

You must be registered for see images

Dyno 6 - Peter Blach - Viper stock - 399 rwhp and 443 rwtq

You must be registered for see images

Dyno 7 - Clay Jackson - Viper minor mods - 464 rwhp and 489 rwtq

You must be registered for see images

Dyno 8 - Ivan Wood - Viper RSI paxton kit - 561 rwhp and 544 rwtq

You must be registered for see images

Dyno 9 - Brett Williams - Supra single turbo - 647 rwhp and 603 rwtq

You must be registered for see images

Dyno 10 - Bryan Manning - Viper stock - 405 rwhp and 448 rwtq

You must be registered for see images

Dyno 11 - David Barbee - Viper RSI paxton kit - 656 rwhp and 616 rwtq

You must be registered for see images

Dyno 12 - Richard Falcone - Ram SRT-10 truck stock - 419 rwhp and 427 rwtq

You must be registered for see images

Dyno 13 - Gerald Cashiola - Ram SRT-10 truck RSI TT bolt-on - 723 rwhp and N/A rwtq

You must be registered for see images

Dyno 14 - Carter Snyder - T/A H/C with NOS - 473 rwhp and N/A rwtq

You must be registered for see images

Dyno 15 - Garett Oliphant - C6 MTI H/C - N/A rwhp and N/A rwtq

You must be registered for see images

Dyno 16 - Jason Styles - Viper RSI TT bolt-on pump gas - 907 rwhp and 953 rwtq

You must be registered for see images

Dyno 17 - Tommy Banh - Supra single turbo by Autobanh Motorsports - 1,016 rwhp and 724 rwtq

You must be registered for see images

You must be registered for see images

Dyno 18 - Samir Datt - Supra single turbo - 742 rwhp and 578 rwtq

You must be registered for see images

Dyno 19 - Tuan Le - C5 stroker motor and NOS - N/A rwhp and N/A rwtq

You must be registered for see images

And finally, just some general event/shop pictures!

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

Thanks to all that helped and thanks to all that participated. We hope to see you all at the next Houston VCA event! Don't forget to visit www.racingsolutionsinc.com for all your Viper needs!!!!

Peter Blach

p.s. The next Houston VCA mailer will be in your mail box within the next 2 weeks...

 

[CMilViper]

Awesome pics!

 

[joshwars]

Clean shop! Big props to the Ram putting down all the power! Wow! Is that thing impossible to hook up or what?

What was the deal with the sub 400 RWHP Vipers in that session? Heat soak?

 

[houstonT]

Yea, it was at or over 100 degrees and VERY humid all day. All the cars were very heat soaked...
Peter

Clean shop! Big props to the Ram putting down all the power! Wow! Is that thing impossible to hook up or what?

What was the deal with the sub 400 RWHP Vipers in that session? Heat soak?

 

[houstonT]

Cmil - thanks!
Peter

 

[got one]

Nice numbers Jim!

 

[JB/SRT]

Ryan - hello and thanks. I'm ready for a cruise your way when the heat breaks in October. Tell Ashley hi. Are you a horse owner yet?

Peter and Albert - you guys are doing a great job for Houston VCA. Now work on a group buy for a TT package!! LOL

 

[caj98GTS]

Thanks definitely need to go out to the RSI guys, Peter, and Albert. It was a great event. I must say I was blown away watching the TT vipers lay down that much HP! Impressive is an understatement. I am anxious to get the car back over to RSI once "winter" sets in - I want to see what the car will do with more reasonable temps and low humidity! Thanks again guys.

 

[JGK95]

Congrats to RSI on the Excellent Day,

Peter, THANKS FOR THE PICS!! Those cars look Sweet!

Jay K.

 

[houstonT]

JB - thanks bud! I can definately work something if you can get a group of 4-5 interested customers!!! Let me know!

Clay - it was great to meet you! I look forward to seeing you at ALL the Houston VCA events!

JGK - thanks Jay! I will make sure to keep the boards updated on our get togethers and continue to post pictures and such...

Peter

 

[98MODMTR]

Wow! One hell of a facility. That C6 looks BAD ASS!