Hi Everyone,
Here's some of the latest news:
The second production run is about 1/3 of the way shipped out (sent out 12 last week). All has been going very smooth since we introduced the VEC2. We have another 26 orders to fill, all of which are polished and are going out over the next couple of weeks.
Work has been underway to produce an ignition system upgrade and results are promising. Suprisingly enough, the Viper coil pack is kind of weak and we're working on improving its output.
Fuel pump voltage boosting has been working well. We're able to support much larger injectors, still using the stock pump system. Our standard 5 psi kit uses injectors that flow 42 lbs/hr and the stock pump/voltage is able to support them. Increasing the fuel pump voltage with a booster has allowed us the ability to support 50 lb/hr injectors and run much richer, giving us the fuel flow we need to supply modified engines with the Supercharger (though a larger pump may be necessary for very high output engines (over 700 rear wheel HP)). Programming for the larger injectors is complete, cards have been burned for the VEC2, custom programming is available and 100 50 lb/hr injectors are on the shelf.
Work continues in Sweden on the Gen 1 kit. It's getting close enough that we've agreed it's time to start taking pre-orders. If you're interested in a Gen 1 (1992-1996 RT/10) Supercharger system, it will be about the same price as the current kit ($7,495.00). Boost will be at 6 psi, which should yield substantial gains in Torque and Horsepower across the entire RPM range. Contact us by e-mail, fax or telephone to get on the list. Orders will be filled in order. No deposit required at this time. Approximately delivery time is July - August.
We've filled all our black anodized Supercharger orders and have two kits left over. They are on the shelf and are ready to go. $7,495.00 for the complete kit, with the VEC2 and 1 year warranty. First come, first served. Picture below.
That's about all for now. We'll continue to update everyone as progress continues.
Regards,
Sean Roe
www.RoeRacing.com
904-733-5469 voice
904-733-5469 fax
[email protected]
Here's some of the latest news:
The second production run is about 1/3 of the way shipped out (sent out 12 last week). All has been going very smooth since we introduced the VEC2. We have another 26 orders to fill, all of which are polished and are going out over the next couple of weeks.
Work has been underway to produce an ignition system upgrade and results are promising. Suprisingly enough, the Viper coil pack is kind of weak and we're working on improving its output.
Fuel pump voltage boosting has been working well. We're able to support much larger injectors, still using the stock pump system. Our standard 5 psi kit uses injectors that flow 42 lbs/hr and the stock pump/voltage is able to support them. Increasing the fuel pump voltage with a booster has allowed us the ability to support 50 lb/hr injectors and run much richer, giving us the fuel flow we need to supply modified engines with the Supercharger (though a larger pump may be necessary for very high output engines (over 700 rear wheel HP)). Programming for the larger injectors is complete, cards have been burned for the VEC2, custom programming is available and 100 50 lb/hr injectors are on the shelf.
Work continues in Sweden on the Gen 1 kit. It's getting close enough that we've agreed it's time to start taking pre-orders. If you're interested in a Gen 1 (1992-1996 RT/10) Supercharger system, it will be about the same price as the current kit ($7,495.00). Boost will be at 6 psi, which should yield substantial gains in Torque and Horsepower across the entire RPM range. Contact us by e-mail, fax or telephone to get on the list. Orders will be filled in order. No deposit required at this time. Approximately delivery time is July - August.
We've filled all our black anodized Supercharger orders and have two kits left over. They are on the shelf and are ready to go. $7,495.00 for the complete kit, with the VEC2 and 1 year warranty. First come, first served. Picture below.
You must be registered for see images
That's about all for now. We'll continue to update everyone as progress continues.
Regards,
Sean Roe
www.RoeRacing.com
904-733-5469 voice
904-733-5469 fax
[email protected]
