Sway Bar Part Numbers???

[pokeyl]

I am looking for Gen 3 and Gen 4 ACR part numbers, Also Gen 5 ACR/TA..

If anyone has a data on the spring rate that would be good also.
Thanks

 

[Goggles Pizano]

Gen5 have hollow and solid ones so watch out.

 

[Old School]

5181444AA

 

[SA HEAT]

2008 ACR:
Front: 514 lb/in
Rear: 1085 lb/in
Front Anti-roll Bar: 27mm Solid
Rear Anti-roll Bar: 27mm Solid

Try 5181444AA (front) and 51814438AA (rear)

 

[99RT10GTS]

See!! See!!!!

 

[pokeyl]

5181444AA

Order, thanks

 

[pokeyl]

Has anyone mixed bars? hollow front and solid rear? or the other way???

I know Dodge did a lot of work getting them to match.

At Autocross I want the front turn-on, as much as I can get. suspension 101 more rear plans the front. flip side more over-steer, tail happy!!!

 

[Old School]

The reason hollow sway bars are used is less weight, they are very close in stiffness to a same diameter solid bar.

 

[pokeyl]

OK, I tested the solid to hollow bar. The solid checks 18% stiffer at 12 degrees for deflection.