The Last of the Striker Cylinder Heads Available now - until gone

[GTS-R 001]

In a special offering to sell out the remaining existing stock of the Striker Cylinder heads that used to be made by JM Cylinder heads we are offering for a limited time the following heads for Gen 1 and 2 Vipers. These heads are only available until the existing stock is gone and that is it for now.

The JM Cylinder heads are some of the highest performing cylinder heads ever made for Dodge Vipers. Performance gains of 100-135 HP (with cam) are the norm, not the exception. All these heads are an existing stock of JM Cylinder heads and that is all there is, JM Cylinder heads has no intention of further production.

There has been a 1 to 2 year drought in the market for these heads, this particular stock allotment was ******* for the past year and is now back in the hands of JM and needs to be sold.

The Gen 1 and Gen 2 heads available now are as follows:

· 1 Sets of Gen. 2 Striker Street w/ Crower rockers - $6995.00

· 1 Set of Gen. 2 Striker Street $5650.00

· 1 Set of Gen. 2 Striker Race heads - $6595.00 may be available (checking stock now)

· 1 Set of Gen. 2 Stage 3 heads w/ Crower rockers - $5400.00

· 1 Set of Gen. 2 Stage 2 heads - $3995.00

· 2 Sets of Gen. 1 Stage 3 heads - $3995 each

· 1 Set of used (Refurbished) Gen. 2 Stage 3 heads - $1995.00

These heads are the last of their kind, don;t hesitate, some people have been looking for Strikers for years

These will be on all the Viper sites by end of day today and Ebay tonight.

To purchase contact me by email vs PM, [email protected]

Thanks

 

[DrumrBoy]

These heads are awesome. I have a set on the race car. I thought that Exotic was taking over for JM and was going to produce more.....

 

[GTS-R 001]

These heads are awesome. I have a set on the race car. I thought that Exotic was taking over for JM and was going to produce more.....

Yes, these heads are the best of the best.

Exotic was the purchaser of JM cylinder heads via the company that bought Exotic. Kevin recently took Exotic back and JM took JM Cylinder Heads back after the investor company failed to live up to its obligations. Kevin and JM are still great friends but the cylinder head bus reverted back to JM and I am now offering the remaining stock to the market for JM.

 

[KNG SNKE]

The refurbished heads sound nice.

 

[GTS-R 001]

The refurbished heads sound nice.

The refurbs are an outright steal. To have a set of GEn 2 stage 3's that JM has personally gone over and "refurbed" by him, wow, makes me wish I had a Gen 2!

 

[heath1225]

Could explain the difference between the different stages of cylinder heads?

 

[GTS-R 001]

Could explain the difference between the different stages of cylinder heads?

The Stages 1, 2 or 3 designate the degree of porting, 1 being a mild port job, 2 being a pretty good one and 3 being the best that can be achieved from a stock casting.

The stage 3 heads that JM does are some of the best in the industry. There is no guess work by Jeff, since he designs heads for a living he has the ability and knowledge and tools to do the CFD required to not only increase the flow but the port velocity and the swirl patterns created. Others can only guess at the things that Jeff deals with every day. Hence why his heads make such good power

 

[heath1225]

Thanks. And how do those heads compare to the Striker Street and Race heads?

 

[FrankBarba]

sent you an email. did you receive…..

 

[GTS-R 001]

sent you an email. did you receive…..

Frank,

I replied to you post in the other thread,

I replied to your SARHD acc from the alley through that email that was bound to it, Dream something, it bounces saying you have not allowed permissions to receive emails.

Please either call me or email me through your email address I emailed back to you on last night, the email you normally use <[email protected]>

 

[GTS-R 001]

Thanks. And how do those heads compare to the Striker Street and Race heads?

Frankly the Race and street strikers are in a class all their own. The stage 3 heads are some of the best CNC ported heads you can buy/use.

 

[GTS-R 001]

These Gen 1 and Gen 2 heads are still available:

· 1 Sets of Gen. 2 Striker Street w/ Crower rockers - $6995.00

· 1 Set of Gen. 2 Striker Street $5650.00 (on hold)

· 1 Set of Gen. 2 Striker Race heads - $6595.00

· 1 Set of Gen. 2 Stage 3 heads w/ Crower rockers - $5400.00

· 1 Set of Gen. 2 Stage 2 heads - $3995.00

· 1 Sets of Gen. 1 Stage 3 heads - $3995 each

 

[GTSnake]

I run the stage 3 street heads and I made 1300 rwhp at 22lbs boost.

 

[GTS-R 001]

I run the stage 3 street heads and I made 1300 rwhp at 22lbs boost.

send me the details of your build if you would

Thanks

 

[Jack B]

My NA G2 with JM's stage 3 heads turned a 10.91 @ 129 with a not so good DA of 2500.

 

[GTS-R 001]

Update


· 1 Set of Gen. 2 Striker Race heads - $6595.00 -

· 1 Set of Gen. 2 Stage 3 heads w/ Crower rockers - $5400.00

· 1 Set of Gen. 2 Stage 3 heads - $3995.00

· 1 Sets of Gen. 1 Stage 3 heads - $3995 each

 

[GTS-R 001]

Update

· 1 Set of Gen. 2 Stage 3 heads w/ Crower rockers - $5400.00

· 1 Set of Gen. 2 Stage 3 heads - $3995.00

· 1 Sets of Gen. 1 Stage 3 heads - $3995 each

 

[hiss highness]

still waiting for the abs vipair duct, and what happened with the gen 2 shocks?

 

[hiss highness]

don't steal my threads, was just asking about product was not bringing steve down, saw my thread stolen on another site, grow up

 

[KNG SNKE]

don't steal my threads, was just asking about product was not bringing steve down, saw my thread stolen on another site, grow up

First off the way you posted it shows that your bringing up an issue from which the vendor is known for, undelivered product. Maybe a rewording would make it as it should have been in the first place. Second what are you talking about stealing "your" threads. This is the internet, you own nothing! Third this is not an issue of growing up. This is an issue that has been ongoing time after time and makes folks hesitant to buy things.

 

[hiss highness]

I guess hijack my thread would be appropriate, it was automatic that my thread was negative and was utilized on another site as such and utilized against steve/vipair, this will be my last post on vca, it has gotten brutal on here last month or so, I did not buy a viper to be trolled

 

[KNG SNKE]

I guess hijack my thread would be appropriate, it was automatic that my thread was negative and was utilized on another site as such and utilized against steve/vipair, this will be my last post on vca, it has gotten brutal on here last month or so, I did not buy a viper to be trolled

Wow really? You got mad because your post read that you didn't have product delivered and because I informed the other site of the issue? Are you really pouting about this? I am the last person to really start **** on these forums but there is a big reason why I did not purchase a set of these heads even though I wanted to and have funds available. I wish it wasn't that way but it is. And the thread is Steve's, not yours. I linked the entire thread to the Alley. I guess you can say I hijacked your post but its your post, you posted it. Maybe clearly conveying a message so it wont be misunderstood would make more sense no? Either way calling me a troll is so far off it's not even funny. I have met hundreds of members on here personally including some of your Canadian brothers. I am far from a troll. Have a nice day and good luck with that English thing, it's really working out for you!

 

[EllowViper]

I'm Norwegean and know a thing or two about trolls....We need more trolls like KNG SNK...

 

[220 Viper]

I ordered and paid for a set of the Street Strikers, and I am looking forward to receiving them. I can't wait to see them in person. Have any other purchasers received an update on shipping?

 

[GTS-R 001]

I ordered and paid for a set of the Street Strikers, and I am looking forward to receiving them. I can't wait to see them in person. Have any other purchasers received an update on shipping?

All the heads are sold except for one set of Gen 3 stage 3's and one set of Gen 1 stage 3's

All the heads are being prepped for shipping, getting a once over and final assembled according to individual orders, some people have ordered cams, special rockers, etc. which take time to order, ship, receive, and assemble. And as I mentioned on the phone a hour and a half ago, the waybil #'s will be sent out to everyone over the next day or two.

 

[220 Viper]

Any update regarding shipment of the heads?

 

[intense5.5]

Any update regarding shipment of the heads?

Sadly, I knew this was going to be your next post.

 

[Tom Sessions]

It seems that post cause quite a stir. And things are supposed to be happening tomorrow.It's sad that it takes posting public to make things happen. Good luck to all that have sent money.

 

[KNG SNKE]

Sadly, I knew this was going to be your Next post.

It is sad because I would have definitely picked up a set. More than a month later has anyone received the heads they ordered?

 

[Ron]

I received my GENII Stage III "refurbished" heads on Friday. They may have been used, but they look brand new to me. No indication of previous wear or use anywhere. Very impressive looking and though shipping was slow, Steve responded to every email and phone call immediately. Well worth the wait.

Thanks Steve & Jeff!