Trim Screw 06035625 Junkyard Scavenging

[Tom and Vipers]

They are everywhere, but it would be nice to have a Reverse Lookup parts diagram. There should be a ton of them in the bone yards.

Anyone find any easy pickin's?

The screw is left 2 in this pic: It holds the dash trim panel under the column. It uses 4 or 5.
It is a "Flat Top Washer Head" screw and has a "Loose" washer (washer spins and does not come off)
Another thread found a very close equivalent from McMaster except it was a screw + washer, not the loose washer screw.

You must be registered for see images attach

https://www.moparpartsoverstock.com...Used-for-Right-and-Left/6726692/06035625.html

Looked specifically for Ram Truck 2002-2009, found this
https://www.moparpartsoverstock.com...Used-for-Right-and-Left/6726692/06035625.html

This part is in many places: Fits Aspen, Dakota, Neon, Ram 1500, Ram 2500, Ram 3500, Viper

.190-16x.750,

Adjuster Bracket Attaching,
Attaching,
CRUISE SERVO ASSY TO BATTERY TRAY,
Door Surround To Frame Sill,
Door Surround To Frame Sill Attaching,
Door Surround To L-Bracket and Frame,
DUTY CYCLE PURGE VALUE TO BATT TRAY,
DUTY CYCLE PURGE VALVE TO BATT TRAY,
Fender to Headlamp Extension Attaching,
Front Extension to Headlamp Bracket,
Kneeblocke Attaching,
Kneeblocker Attaching,
Linear Purge Valve Bracket,

Quantity of 3,
Servo to Battery Tray,
Sill Arrachment to Frame,
Sill Attaching to Frame,
Sill Door Surround,
Sill Panel to Splash Shield Attaching,
Splash Shield,
Splash Shield Attaching,

SRT,
To Frame,
To L-Bracket,
VACUUM RESERVOIR ATTACH.

 

[Goggles Pizano]

I need the battery cover screws and I think 1 rear innerliner screw.
The battery screws are tapped so not available at local box store.

 

[luc]

They are everywhere, but it would be nice to have a Reverse Lookup parts diagram. There should be a ton of them in the bone yards.

Anyone find any easy pickin's?

The screw is left 2 in this pic: It holds the dash trim panel under the column. It uses 4 or 5.
It is a "Flat Top Washer Head" screw and has a "Loose" washer (washer spins and does not come off)
Another thread found a very close equivalent from McMaster except it was a screw + washer, not the loose washer screw.

You must be registered for see images attach

https://www.moparpartsoverstock.com...Used-for-Right-and-Left/6726692/06035625.html

Looked specifically for Ram Truck 2002-2009, found this
https://www.moparpartsoverstock.com...Used-for-Right-and-Left/6726692/06035625.html

This part is in many places: Fits Aspen, Dakota, Neon, Ram 1500, Ram 2500, Ram 3500, Viper

.190-16x.750,

Adjuster Bracket Attaching,
Attaching,
CRUISE SERVO ASSY TO BATTERY TRAY,
Door Surround To Frame Sill,
Door Surround To Frame Sill Attaching,
Door Surround To L-Bracket and Frame,
DUTY CYCLE PURGE VALUE TO BATT TRAY,
DUTY CYCLE PURGE VALVE TO BATT TRAY,
Fender to Headlamp Extension Attaching,
Front Extension to Headlamp Bracket,
Kneeblocke Attaching,
Kneeblocker Attaching,
Linear Purge Valve Bracket,

Quantity of 3,
Servo to Battery Tray,
Sill Arrachment to Frame,
Sill Attaching to Frame,
Sill Door Surround,
Sill Panel to Splash Shield Attaching,
Splash Shield,
Splash Shield Attaching,

SRT,
To Frame,
To L-Bracket,
VACUUM RESERVOIR ATTACH.

I bought a few 21 years ago
As a matter of fact i bought a bunch of different screws, bolts , plastic caps,etc. glad that i did then

 

[Tom and Vipers]

I bought a few 21 years ago
As a matter of fact i bought a bunch of different screws, bolts , plastic caps,etc. glad that i did then

That pic is over $75 worth of screws.

 

[Steve-Indy]

Contact Brian Jones via am PM here.

 

[GTS Dean]

Here are OE fastener supplier links:

Auveco - Automotive Clips and Fasteners

www.auveco.com

Automotive Retainers, Clips and Fasteners - ClipsAndFasteners.com

Your one-stop shop for universal automotive retainers, automotive moulding clips and interior trim fasteners. Shop today and save on free shipping for all orders over $99!

www.clipsandfasteners.com

Metric Fasteners & Hardware｜BelMetric

Bel-Metric sells metric hardware & specialty automotive supplies worldwide. Visit our website to purchase metric fasteners, nuts, bolts, screws, washers & more.

belmetric.com

 

[Tom and Vipers]

Contact Brian Jones via am PM here.

I looked for member "Brian Jones" (and all combinations) and couldn't find. What am I doing wrong?

 

[Steve-Indy]

Just call him at Jones Auto Inc. located in Orleans, Indiana.

 

[MoparMap]

The problem with some of those OEM suppliers is that they only sell business to business. Maybe you've already checked all those out, but I know in the past when I was looking for some wire harness retaining clips (the kind that get wrapped into the harness with tape), the only place I could find ones that looked right only sold in quantities of 1000+ kind of numbers. So I guess maybe not strictly business to business, but effectively so with the minimum quantities.

That screw looks very much like the one that holds the wheel well liners to the fenders on my gen 3 as well. My car has a bad habit of spitting them out. I worked with a local Fastenal to find something similar, but it was a separate screw and washer thing like you saw already. I can't understand how the OEM ones are $7 a screw...

 

[Tom and Vipers]

Auveco's site has a terrible search filter (if it even has one - I don't remember at this point.) Good filters are at McMaster and Digikey and I'm sure others.

NAPA appears to have the precise fastener with loose washer, its just that the screw head is not a "flat top washer head" which I think is the correct style definition - theirs is a round head that is wider and not as tall as a proper round head.

I know it is stupid unproductive, but Tomb Raiding a junkyard for the proper fasteners is something that would "enjoy" (at 72, I do weird shit)

I think the "Karma" of making a car correct in ways a buyer would never see, manifests in the seller which affects the buyer.