Y2K5SRT
Enthusiast
Post 'em here! 
Vendor Review: Macedo Motorsports
- Thread starter Y2K5SRT
- Start date
Excellent workmanship and he has full knowledge of Viper engines and drivelines. I have over 30,000miles on my Macedo rebuilt engine. M2 airbox works similar to Vipair and custom painted and built. I recently removed heads for porting and cylinderwalls look new and there is no discernable wear. Mind boggling performance and 20mpg (US gl.). I've driven this car from Ohio to central BC. I was the only Viper driven from Western Canada to Detroit and back and one of the 5 Wash VCA club guys that drove to VOI and back.
Ted
Ted
chimazo
Enthusiast
When is Kenny going to chime in?
RobZilla
Enthusiast
I stumbled across Kenny's Macedo review site. Obviously that build was a few years back? Anyone else have a real review they can give me 
My car is set to go there in the next week or so for a S/C install and tune.
My car is set to go there in the next week or so for a S/C install and tune. I have known Larry for 15 years and have found him to be one of the best in the country.
hard to argue with that reference
RobZilla
Enthusiast
Thanks guys, I knew that wouldn't take long to clear up
Plum I've heard great things about DLM as well. He is a little more than twice the distance from M2. I have all the confidence in the world that M2 can put a big smile on my face. No doubt I will have a review in the coming weeks.
Plum I've heard great things about DLM as well. He is a little more than twice the distance from M2. I have all the confidence in the world that M2 can put a big smile on my face. No doubt I will have a review in the coming weeks.
Y2K5SRT
Enthusiast
Which president? Just curious, as it isn't this one...
Simms
Enthusiast
I believe Ted is refering to Mr. John Canal, North/Central FL President.
To make it short, Larry has been doing work on my car for 4-5 years now (can't keep track). He has been first class to me all the way. He originally helped me with my Roe S/C install over the phone and email before I was even a customer. Eventually I sent him my car to figure it out. I ended up with a great engine build, heads, cam, Roe etc. I've ran the car on the street, track, and strip. It's been a great build and I am an extremely anal/picky person.
In fact, he has my car again, finishing up a TT build on it.
Florida vipers owners are very lucky when it comes to selection, they have Macedo, Levin, and Heffner.
To make it short, Larry has been doing work on my car for 4-5 years now (can't keep track). He has been first class to me all the way. He originally helped me with my Roe S/C install over the phone and email before I was even a customer. Eventually I sent him my car to figure it out. I ended up with a great engine build, heads, cam, Roe etc. I've ran the car on the street, track, and strip. It's been a great build and I am an extremely anal/picky person.
In fact, he has my car again, finishing up a TT build on it.
Florida vipers owners are very lucky when it comes to selection, they have Macedo, Levin, and Heffner.
Gary Lashinsky
Enthusiast
I have known Larry for many years. He is by far one of the best tuners around. He built race cars for me, serviced all of our school cars at the Viper Driving School and is reliable and continues to service all of our Vipers and new SRT 8 Challenger. You can't go wrong with him as your tuner.
fuelman
VCA Venom Member
Macedo does all the work on my cars, including brands other than Dodge, yes I admit I own Fords, and Chevys. Larry is one of the best people you will ever meet, his knowledge of the Viper and the V-10 I would put up against anyone in the World. He just finished putting a twin screw on my SRT8 challenger, which I would guess will probably hang with a stock Viper in a drag race now, and the install and tunning are tops. Larry tunned my 01 GTS with a Roe to perfection, the car ran consistant low 10's up to 143 mph on drag radials and had I put a real race tire probably high 9s. This was on a stock cast piston motor too. I have recovered from the purchase of my ACR, so now we are going to move forward with the twin turbo set-up for the GTS. I know there is one person who doesn't agree, but other than a compeitior you won't find many others that have anything negative to say about Larry Your car will be awesome.
RobZilla
Enthusiast
Thanks John. I saw your GTS over there this past week when I dropped mine off. That alone was a big boost of confidence although at that point, I really didn't need it.
Pick up should be next Tuesday.
Pick up should be next Tuesday.
EllowViper
Enthusiast
So Rob...let's have a rundown of what Sir Larry is going to do to your Snake...I see you "scrounged-up" a blower finally !!!!
RobZilla
Enthusiast
Nothing too fancy - Roe 5#, Vec III, fuel filter, 180 deg thermostat, plugs, and a tune with a few cards to send me home with. He will do a before and after dyno for me as well.
"scrounged-up" = hardly. I had the deal in the works soon after my original post. Just took a lil while to take delivery from halfway across the country.
"scrounged-up" = hardly. I had the deal in the works soon after my original post. Just took a lil while to take delivery from halfway across the country.
stonemaster44
Viper Owner
HEY ROB
you gonna love the Roe s/c! and no better tuner than larry to do the work on your car, not only he's good he is perfectionist, he did a great job on my Roe, and after about 5000 miles, no problem whatso'ever (exept not driving the car enough) your car is in good hands my friend,good luck and stay safe.
Sam
you gonna love the Roe s/c! and no better tuner than larry to do the work on your car, not only he's good he is perfectionist, he did a great job on my Roe, and after about 5000 miles, no problem whatso'ever (exept not driving the car enough) your car is in good hands my friend,good luck and stay safe.
Sam
99 R/T 10
Enthusiast
Larry is the best. Most of you guys have never seen the Gen I "creation" he did for a local Orlando "gentleman" 
, but it was nothing less than a work of art, probably the fastest Gen I EVER!
Check my Signature..............................
, but it was nothing less than a work of art, probably the fastest Gen I EVER!Check my Signature..............................
2MANYTOYS
Enthusiast
ViperPWR
Enthusiast
My car is there right now waiting on a Paxton install. Unfortunately, I won't get to drive it till August. Duty calls
RobZilla
Enthusiast
I cannot give enough praise to Larry for the job well done. Although the build and tune took longer than expected: 3 1/2 weeks, I'm glad he took the time to do everything right as well as update me along the way. I couldn't be happier. I know I made the right decision going with the Roe S/C. Thanks to this board especially RTTTTed for his grand recommendation of M2 Motor Sports.
Here is a link to the picture and dyno sheet: http://forums.viperclub.org/rt-10-g...ght-her-home-yesterday-blown.html#post2693514
Another very satisfied M2 customer.
Here is a link to the picture and dyno sheet: http://forums.viperclub.org/rt-10-g...ght-her-home-yesterday-blown.html#post2693514
Another very satisfied M2 customer.
Similar threads
Latest posts
-
-
New 99 RT/10 owner, few questions on issues/coilovers.
- Latest: Goggles Pizano
-
-
-
-
-
-
