Video camera mount info needed.

[VIPER GTSR 91]

What is the best video camera mount for the SRT10 and track days that either mounts via suction to the inside of the windshield or via a bar behind the seats? No roll bar in car. Where to buy? I have a small Canon HD unit. Thanks.

 

[SFViper]

I use my GoPro HD camera & mount for the track but you can also use the Panavise 809 Camera Window Suction Cup Mount. It uses the same suction mount as the GoPro unit. I use it to attach multiple cameras. Best of all it's really cheap at Amazon.

 

[Ghoust]

I did a bit of research and the Go pro motorsports setup is probably one of the best.

 

[Kevan]

I've only had my GoPro HD for a few weeks but i love it.
Simple, easy, TONS of mount options.

My only complaints are about the materials used for some of the mount arms (they should be the same material as the suction cup base), and that there's no gimble option.

Other than that, a solid investment.

 

[Viperless]

Made my own out of a strut tower bar. Kind of crude but works very well.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[DeLViper]

I use several different mounts, here are some samples that works great for the windshield and exterior body of the Viper.

Sorry for the low resolution, taken from the iphone at low light.

 

[VIPER GTSR 91]

I cant thank all of you enough for these awesome replys. I ordered the Panavise 809 from Amazon for just 26.00 and believe it will do just fine for now.

 

[eucharistos]

I cant thank all of you enough for these awesome replys. I ordered the Panavise 809 from Amazon for just 26.00 and believe it will do just fine for now.

VIPER GTSR 91, have you used the mount yet, any feedback appreciated as i'll be getting a camera mount very soon, tia

 

[Malu59RT]

Thanks for this thread, I'm definitely gonna have to pick up a panavise mount!!

 

[Twister]

The ones in the pic above are the ones I have as well..I ordered 6 of these for around 30$...Off ebay..

they are AWESOME....One has been on my viper windshield for 3 months and has never became loose ect., They literally **** in a good way LOL...

I even can use them on my curved surface helmet and again no problems

 

[chiefchad]

I set up the tri-pod with 2 legs in the rear hatch and 1 leg tucked in beside the seat.
But if that redneck setup doesn't work you can always try duct tape.

 

[VIPER GTSR 91]

VIPER GTSR 91, have you used the mount yet, any feedback appreciated as i'll be getting a camera mount very soon, tia

I will use it at the Houston club track day 10/24 at MSR. My only concern is the limited visibility on right turns as it will be on the passenger side. Hope you can make it.

 

[tucker]

they are AWESOME....One has been on my viper windshield for 3 months and has never became loose ect., They literally **** in a good way LOL...

I even can use them on my curved surface helmet and again no problems

I want to make sure I understand you here. You **** in way good on your helmet with no problems and LOL? Pretty limber for a big fella.