Vipair Lowering Caps on OZ Wheels (W/ Pics)

[Plastic]

So with my new wheels the stock wheel gap was too noticeable. So just a minor change with some caps can make a world of difference.

Let me know what you guys think.


Before

You must be registered for see images

After

You must be registered for see images

 

[Indy]

Second pic looks like it was taken with a setting sun, so it`s hard to see a difference with the sun going into the wheel wells I went the same route as you with the lowering caps and it does make a big difference in real life, maybe not so appearant on pics. Should of been like this from the factory.

 

[Stonep185]

What are the measurements to the fenders in the front and back? Did you do a before and after?

 

[Timnineside]

Hum. Doesn't look like anything changed.

 

[Plastic]

Didn't do before measurements, but anyone on a stock setup can do that.

With caps:

Front-2 1/2
Back- 2 5/8

 

[BlackSnake99]

Not low enough.

 

[Catwood]

good looking car...do you have a BBK? are the wheels 18"?

 

[Plastic]

good looking car...do you have a BBK? are the wheels 18"?

Stock brakes, when I become a baller I'll do a bbk with gen 4 acr x rotors. The fronts are 18x11 and the rears are 18x13

 

[Viper98912]

I'm gonna be honest, with your color and gen, the stock wheels look better

 

[Catwood]

will these wheels clear the BBK?