Viper Engine Cutaway

[Ron]

<FONT face="Comic Sans MS">While going through some of my files, I came across this image:
.
.

You must be registered for see images

.
.
POP Quiz:
What version is it? (easy) and what are all of the identifiers?
</FONT f>

 

[Ulysses]

The oil pan is shallow and the plug is on the side so it's not a 2000 and up GenII.

 

[Hostile]

Ron
Looks like early Gen1,Reasons-oil pan,exh. manifold,and the
big one,four(4) rib intake manifold.

Skeeter

 

[Ron]

<FONT face="Comic Sans MS">
Ulysses, Correct not a GENII, but don't know if the O/P is shallower on a GEN I vs. GEN II. My GEN II oil plug is on the side like the image, but angled slightly down.

Very good Skeeter.... Bet there's more though.....</FONT f>

 

[Chuck 98 RT/10]

Is the image name a givaway? Gen1D?

 

[Ron]

<FONT face="Comic Sans MS">Cheater!

Perhaps an observation or two would redeem you Chuck.....</FONT f>

 

[Chuck 98 RT/10]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ron:
<FONT face="Comic Sans MS">Cheater!

Perhaps an observation or two would redeem you Chuck.....</FONT f>

<HR></BLOCKQUOTE>

Ok, location of the oil filter?

 

[Robert1994]

Naive 1st gen owner, definite motor ******,,,,,,ask me about chev small blocks........anyway, what obvious differences am I looking at between gen 1 and 2 engines besides rocker ratios ?

 

[GTS Dean]

External water manifold on driver's side, alternator top-center, separate oil pickup tube, split exhaust manifold (early Gen1), windage tray, wet sleeve cylinder liners, PCV grommet on driver's side valve cover.

 

[Ron]

<FONT face="Comic Sans MS">WOW Dean, that more than I saw.

Robert1994, To elaborate on the oil pan, the GEN I engine has a top feed oil pick up tube (as pictured) vs. a bottom feeder (cast into the oil pan) on the GEN II.</FONT f>

 

[JonB]

Dean gets my vote for the winner!

A 1992-93.5 Motor

That was fun.

 

[GTS Dean]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Ron:
WOW Dean, that more than I saw.

<HR></BLOCKQUOTE>

Hey, just callin' it like I see it...

 

[GTS Dean]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Mark O:
Is that the alternator cutaway shown located in the center <HR></BLOCKQUOTE>

Aw, you caught me! "After further review" that's the thermostat at the back of the block.

 

[Vip-RT10]

That is my engine! Gen1

 

[Tom and Vipers]

Anyone have a similar c/s for a Gen 2?

Further, same with Mopar Aftermarket Performance head, and

GTS-R also?

The R has a significantly larger ports.