What RPM does your Viper idle?

MoparMap

VCA National President
VCA Officer
Joined
Jan 7, 2013
Posts
2,502
Reaction score
307
Location
Kansas
I think my gen 3 is similar, somewhere between 400-600. Can't remember what my mom's 94 idles at though.
 

kssssnake

Enthusiast
Venom Member
Joined
Dec 21, 2010
Posts
57
Reaction score
10
Brings to mind another thought. It is good to check your throttle bodies every year to make sure they go full open at full throttle. I believe one side needs to crack open first. Viper Steve can address that one. Gremlins play with the cables over the winter.
 

steve e

Enthusiast
Joined
Oct 23, 1995
Posts
999
Reaction score
63
On my 95 I had to adjust the throttle body cables, right from the factory, and after that every so often, it seemed once they were set at the perfect spot they stayed put, if you make them to tight , when you slam on the throttle they click open a few notches and the throttle doesn't open all the way, you will get the hang of it the more familiar you get with the car.
 

Grailkeeper

VCA Member
Venom Member
Joined
Jul 26, 2008
Posts
1,210
Reaction score
0
Hi Guys.....
The tach on the early cars only has a 500 and 750 tic make. With the needle just below the second mark it is sitting at 700 rpm right where it should be....thanx to Dick Winkles for the info....Mr V-10 himself
 
Top