MoparMap's latest activity
-
MoparMap replied to the thread Viper Gen 3 Motor mounts.I have the Woodhouse poly mounts in my car and have been pretty happy with them. You will notice a little more buzz and vibration... -
MoparMap replied to the thread New Gen III Owner.Seeing as there is an O2 sensor right next to one of those holes, I'm thinking it would probably make sense to repair. I would think...
-
MoparMap replied to the thread Bought an SCT x3. Little to no support from SCT. Any tuners available can help out?.Viper Specialty (Dan Lesser) would be a good place to start. I bought a cam from him and he worked to get a tune made up for my car...
-
MoparMap replied to the thread IR autocross.Have any links? That's pretty cool and could help with diagnosing a lot of things. I remember Cat (as in Caterpillar) of all companies...
-
MoparMap replied to the thread Sway bar bushings.You might try RockAuto. I think I got some for my 04 there on closeout a while back. They tend to run on the moderately expensive side...
-
MoparMap replied to the thread 2004 Dodge Viper Gen 3 - lost oil.I would look toward the cooler lines as well. I replaced mine some time ago with lines I made at home and the fittings failed at the...
-
MoparMap replied to the thread New Viper Owner.Nice to see some more tires finally coming around on the market in our sizes. I have run the Michelin Pilot SuperSports pretty much...
-
MoparMap replied to the thread Hard start when hot.Is this the same for later gens? My gen 3 has some pretty inconsistent starting characteristics, but I haven't had a chance to get a...
-
MoparMap replied to the thread New Viper Owner.So totally off topic, but what's different about the ACR-X oil cap? Now I'm just curious, lol.
-
MoparMap replied to the thread Transmission Fluid for G1 & G2.For what it's worth, I emailed Tremec and asked them the same question regarding what to use since SynTorq is out of production. They...
-
MoparMap replied to the thread Control Arm Bushing Up-Grade-....Yeah, I think this is a good case of "close enough" for a street driven car. Just jack the car up from the bottom of the lower control...
-
MoparMap replied to the thread Question about brakes.I finally wore out my Stoptech rotors and the Girodisc rings were what I had in mind to replace them with. Haven't gotten around to it...
-
MoparMap replied to the thread Trim Screw 06035625 Junkyard Scavenging.The problem with some of those OEM suppliers is that they only sell business to business. Maybe you've already checked all those out...
-
MoparMap replied to the thread New Gen III owner.You might consider a full fluid flush in general (coolant, brakes, power steering, oil, transmission, differential, etc.). With so few...
