Gen 2 (1999) stock RT-10 - What "factory" upgrades are needed?

killerviper

Viper Owner
Joined
Nov 7, 2009
Posts
155
Reaction score
4
Location
Houston, Texas
Hi folks,

It's been a few months since I purchased my bone-stock (even the shifter is stock) 21,000-mile 1999 RT-10. I hear some basic factory upgrades (power steering bracket?) are deemed suitable to ensure a smooth time and ride. Can someone guide me with a list and potential vendors?

I already got new tires dated 2022, so that's off the list!

Thanks in advance for your help.
 

Goggles Pizano

Enthusiast
Joined
Nov 25, 2009
Posts
504
Reaction score
116
People use upgrades too loosely.

But,

Check crank bolt on balancer for looseness. Paint mark it or Pinning it another option but that requires drilling crankshaft.

Power steering cap vent hose.

Power steering bracket and pulley as pulley is composite material and not metal so it can break.

Check Inner tie rods front and rear.

Pedal assembly 'bird cage'.

Coolant overflow tank can be punctured by sheet metal screw on bumper assembly.

That's just a start.
 

99RT10GTS

Enthusiast
Joined
Aug 24, 2022
Posts
575
Reaction score
138
Location
Tennesse
Headers, 3" exhaust. Supercharger, nitrous................................

Better looking wheels....................... :D
 

Bill W

Enthusiast
Joined
Oct 22, 2018
Posts
80
Reaction score
21
Location
Greenville, SC
You might consider asking again on the RT/10 forum here.
 

daveg

Enthusiast
Joined
Dec 26, 2006
Posts
376
Reaction score
42
Location
Mass...
I am in the camp of leaving stock but upgrading pully and bracket is a must.
 
OP
OP
K

killerviper

Viper Owner
Joined
Nov 7, 2009
Posts
155
Reaction score
4
Location
Houston, Texas
Thanks, folks! I noted all the things, especially the PS pulley and bracket, which are first on the list. I should have asked on the RT forum. I'll re-assess once I get the above looked at/done.
 
Top