I also recommend swapping the cross over system with a cat back system. I did it not only is the cabin cooler the door sills are cooler. And it eliminates a lot of weight and will sound better. Here is a picture of old and new side by side. Also wrap the new pipes with insulation.
I had a similar problem. Check your reverse lights. It was my reverse switch, it's located on the side of the transmission. After I replaced the switch everything was back to normal.
I have one sitting in my shed. Frame, window, cover. I replaced mine with one that I bought a year ago, used of course. On my 2005 Copperhead. It's in one piece, but the one that I replaced it with is much nicer.
Look under the driver's side mirror on the door though. Underneath the door overhang there's a key hole to unlock the door. You'll need to get down low and look up at it. Ignition key will unlock the door.
No, I set this up to work with an old cell phone as the screen monitor. It was simple to do without wires to cabin. Turn on parking lights and camera switches on and activates app on phone.
I purchased a WiFi backup camera. Hooked the power up to the license plate light. It works with an app on your cell phone. The lights need to be switched on, but I like driving with the lights on in the daytime.
Stray Cat:
The tune will be created specifically for your snakes year, model, upgrades, etc.
As well as the elevation where you're at and the highest octane grade that you will be using. The other tweaks that are included make the snake a lot more comfortable and enjoyable to drive. You can ask...
John, about the custom tune. I purchased it with the device that plugs in to the OBD port. It's a package deal option and plug and play do it yourself. Once you have the device future tunes can be purchased and sent to you via email. It's worth the investment believe me you will be happy with...
I left one important fact out. After installing the Billy Boat cat back set up I purchased a custom tune from Roe racing. Talk about waking the car up, this did the job for me. The tune also helps keep the engine cooler with fan speed tweaks and other benefits like eliminating the skip shift...
I have a gen 3 Copperhead. I removed the OEM cross over cat back set up. Replaced it with a Billy Boat cat back set up that I found on ebay. It's old new stock made in 2009, I was lucky to find it. It sounds amazing, louder than stock and just enough rumble muscle car sound. I wrapped both sides...
I had the exact same thing happen to my gen 3. It turned out being a loose camshaft position sensor that got sheared off at the tip. Vibration might have caused the bolt that holds it to loosen. I replaced it and she fired right up.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.