Search results

  1. A

    have 2 like new front tires from my viper Pirelli P295/30 ZR18 94Y sell for $200 Rich 973 769 0092 in Morristown NJ

    Have 2 like new tires off front of my viper Pirelli P 295/30 ZR18 94Y asking 200 dollars in Morristown NJ Rich at 973 769 0092
  2. A

    2006 coupe rear shock nightmare

    By the way the reason you have to tighten the bolts extremely well is that the shock mounts have slop in mounts holes are larger than the bolt itself so will make noise if not tight., then also if the bolts were not tightened at the proper height the rubber will not work right on the a arms my...
  3. A

    2006 coupe rear shock nightmare

    Ok I have it done now here is what I discovered If you are replacing with aftermarket rear shocks 2003 to 2010 no need to get nuts just take the rubber grommet out above the shock which will allow the top of the shock to go up into the car to get it out of the car. The if aftermarket shocks...
  4. A

    2006 coupe rear shock nightmare

    Ok right comment please feel free to come and visit I got it done now but maybe you need a 66 Sunbeam Tiger selling that
  5. A

    2006 coupe rear shock nightmare

    If you are only a few minutes away come on over I have a sunbeam tiger I just finished be selling that and have a 67 GT 390 mustang I finished my son has a 57 chevy and a 67 vette he is selling just text or phone 973 769 0092
  6. A

    2006 coupe rear shock nightmare

    Well I got into it this morning and 6 hours later I tried to take out the sway bar link but it wqs stuck in there I removed the upper A arm bolts and it gave me almost enough but I had to take the links out but they were now twisted so I took a sawzul and cut it in half the top one came...
  7. A

    Rear shock fork removal help needed

    Put a large pipe wrench on the shock body and then put about a 3 foot long pipe on the pipe wrench total about 6 feet and it will come off then take a nap
  8. A

    2006 coupe rear shock nightmare

    Has there been a link ever on how to install factory rear shocks on these cars I would think that sometime between 2006 and the present someone would have obtained an original set of factor shocks and installed them especially when the cars where newer and they were available.
  9. A

    2006 coupe rear shock nightmare

    I am in Morristown NJ 30 miles west of NYC 973 769 0092 I am trying to get hold of my mechanic viper guy Scott Sorrento he would help will see thanks
  10. A

    2006 coupe rear shock nightmare

    I have to drop the A arms I think by removing the sway bar link to the lower arm I can drop the arms just dont know
  11. A

    2006 coupe rear shock nightmare

    At 81 it was 6 months ago and my memory just cant remember what I did to get it out. But after that the aldans are much shorter so they just bolted in perfectly holes lined up but when I put the aldan next to the stock shock could see the difference. It takes tremendous pressure to compress...
  12. A

    2006 coupe rear shock nightmare

    2006 coupe. I need some advice I have been fighting with the rear shocks since January. I have posted about it several times. I bought the aldans and just want to go back to the originals. But I destroyed them taking them off the forks. So I just bought on ebay a good set of originals...
  13. A

    2006 coupe trying to install aldan rear shocks but cannot screw the aldan rear shock into the fork the threads are wrong

    I am getting back to the forum on the viper aldan shock problem it has now been 7 months of very hard work in exchanging and repairing this rear shock issue. The aldan people are very nice but the G3SBR2 rear shock for the 03 to 10 comes with a 750 lb spring about 9 inches long for the...
  14. A

    anyone want to have Viper info embroidered on anything

    Just a heads up In 2006 I had store in Morristown New Jersey called embroid me make up the Viper logos and other Viper related stuff that could be embroided on anything hats coats shirts etc I paid for it and it is there if anyone wants to send them stuff to embroider or buy from them stuff to...
  15. A

    2006 coupe trying to install aldan rear shocks but cannot screw the aldan rear shock into the fork the threads are wrong

    Just a reminder about the aldan with no forks. Before you can take it off the fork you have to take the coil spring off. Not hard but just another pain to do. used a mcpherson strut compressor to do it . I did not see any other replacement shocks that come with the forks installed that did...
  16. A

    2006 coupe trying to install aldan rear shocks but cannot screw the aldan rear shock into the fork the threads are wrong

    Appreciate all your help, guy in denville give a call and come visit . The aldan shocks I bought from Jegs were the wrong ones it seems that aldan makes shocks for 2 diff size forks one is 2 inch as the originals and also one in 2 1/8 inch the box is clearly mismarked. I sent the ones back...
  17. A

    2006 coupe trying to install aldan rear shocks but cannot screw the aldan rear shock into the fork the threads are wrong

    have a 2006 coupe and purchased aldan rear shocks for it when installing them I removed the originals and unscrewed the forks but the aldan threads would not go into the original forks are there diff aldan shocks or forks being 80 years old just really difficult . Needed a pipe wrench and a 3...
  18. A

    Driver seat lowering kit convert back to stock

    seat frames are available from Mopar and are pretty inexpensive give them a call
  19. A

    Airbag Module Recall

    Hi I have 2006 coupe and I just replaced the air bag box. You are not going to like what has to be done. I had my friend and best viper mechanic come over to do it in my home. He is the mechanic magr at the dodge dealer in Bedford Hills NY north of NYC. His name is Scott Sorrentino. I will...
  20. A

    Airbag Module Recall

  21. A

    OCR module recall info please

    I have an 06 that needs the OCR module replaced. I believe you lift the shift console just enough to get to the screw bottom of gauge cluster cover. Remove the allen screws and the one screw at 6 o clock and remove the cover. I believe you can then remove the radio and get access to the...
  22. A

    NEED HELP...Had an ACCIDENT

    Great paint and body shop is Ultimate auto body in Nutley great old shop does best work ever and prices are old school. He painted my 65 mustang viper red and the quality was a lot better than my 06 viper. Talk to Tony owner or Ken magr tell them Richard Greisberg sent you Will take a bit of...
  23. A

    06 coupe with engine concern

    Yes the sensors were certainly white just like the spark plugs. The car just runs like it did before. Did not pickup any power. But it is really much better and just made me smile ear to ear. Thanks Rich
  24. A

    keep my 06 u bet

    I have an 06 coupe that I love. But really liked the look of the new 13-14 interior especially in the beige color. Black may be beautiful but to an old guy it is depressing and black. So I looked into trading my 06 in. The value of the 06 to a dealer is about 40K retail maybe 50 or so...
  25. A

    Upgrade to 06 engine concern

    I posted on the original that I had taken Chuck Tator's advice about my 06. The 06 has random tech cats, corsa track exhaust, 170 thermo, 354 rear gears.... computer programed only for the lower temp for the fan and making the fog lights into day time running lamps. 16,000 miles.. I had a...

Latest posts

Members online

Total: 938 (members: 8, guests: 930)

Forum statistics

Threads
153,644
Posts
1,685,208
Members
18,220
Latest member
ROIII

Share this page

Top