Search results

  1. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    Bump. I've got some offers very close to what I'm asking, but as of right now it's still available. I'll probably wait another day or so and if no one commits to the asking price I'll sell it to one of the people I've spoken with.
  2. R

    PCM Programming now available!!! L@@K!!

    Good talking to you the last couple days Jason. On the idle hang issue, I noticed a post on it on the Gen. I/II forum right now where Sean Roe again stated that there is idle hang programmed into the factory PCM that kicks in when the car is moving but not in gear (like coasting up to a...
  3. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    Thanks, you have a reply. Also, I forgot to mention that I had my fuel rails polished as well.
  4. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    Yes, and it has all the firmware updates Sean has come out with.
  5. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    No. But it may be getting close. :)
  6. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    bump
  7. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    Hardviper I responded to your PM, and FLX yes, it's still up for grabs.
  8. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    Aside from the minor issue that it's 110 more rwtq than your car, 98's usually dyno higher than '01's, and of course there are differences from car to car even within model years. I'd estimate the "normal" increase in torque more in the 130-40 range (I gained 135) and would expect your car to...
  9. R

    Ok, Who wants a Shiny Edition Roe Supercharger System?

    I know 2ManyToys' setup went fast and there were a few other people wanting it, so now is your chance. This is the polished version with 5 lb pulley and everything that comes with it (retail $7,495), PLUS chrome intake tubes & rear inlet, chrome blower pulley (and I think idler pulley as...
  10. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? The 2000 and up cars have cast pistons rather than forged and a slightly less aggressive cam, hence the creampuff tag. An X-creampuff is simply a 2000 up car that has had forged pistons and possibly a new cam installed.
  11. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? Ward, yes we looked at the cylinder walls closely and of course were going to pull the engine if there was any damage. Oddly enough, there was no sign of anything in the cylinder, the head, or anywhere else in the...
  12. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? Cuda, forged pistons are available in the stock 4" bore size. I just bought some through Arrow. If you're going to pull the motor and bore it, you might as well do .030 over and gain a little displacement, which is what...
  13. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? All of John's points are good, and I think Larry is as good a tuner for the Roe blower as there is (not to mention being a great guy). However, in the interest of full disclosure, Larry also tuned my car, and I still had...
  14. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? Tim, I don't really know because I couldn't do it in 12 days. :) However, that sounds like a reasonable guesstimate to me for someone who knows Vipers and has done this sort of thing before. And I agree with Prvt Jet...
  15. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? Tim, pistons themselves are around $1,000, but the labor to install them is significant unless you do it yourself. The other big question is how much boost you plan to run, and whether you think you'll be happy with a basic...
  16. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? Sorry, I may not have been clear--it's the same piston. The others look ok.
  17. R

    Supercharger, What's the difference between 5, 7 or 8 PSI pulley?

    Re: Supercharger, What\'s the difference between 5, 7 or 8 PSI pulley? I'm in the process of replacing my pistons as well, a process I undertook because I wanted to up the boost. Now I'm really glad I did, because when we got inside we found this: I've also been running the 5 lb pulley...
  18. R

    Putting at rest concerns of the Viper Community

    Proracer, since you brought it up, what's your best time so far? I remember a thread a few months back where you told someone your car ran "low, low 10's," but after 1Tony asked you specifically how low you never replied. Post a slip for us. Oh and I note the answer is no, you didn't give...
  19. R

    Putting at rest concerns of the Viper Community

    That's what I was wondering. If he didn't, and he's pissed because Scott didn't spec out and manufacture a custom piece that no one else makes quickly enough, that seems pretty weaknuts to me. Have someone else make it.
  20. R

    Anyone running stock plugs on a blown car?

    How often do you drive your car? My car frequently stumbles around for a few seconds when I first start it cold too, but I usually don't drive the car but once every couple of weeks, and I figured out it didn't do it if I charged the battery first.
  21. R

    Vec 2 for Stock Vipers?

    They have, as have others: http://vca2.viperclub.org/forums/showflat.php?Cat=&Board=UBB14&Number=307153&Forum=UBB14&Words=vec2&Match=Entire%20Phrase&Searchpage=6&Limit=25&Old=6months&Main=307153&Search=true#Post307153...
  22. R

    Would comp coupe 3 piece BBS rims fit on regular Viper?

    Not on the CC. It uses 18's on both ends, probably because there aren't any 19" tires that are sticky enough.
  23. R

    Help, Please, For Person Seeking 01-02 GTS

    I have dealt with Jenkins and they're straight up guys. That doesn't mean the particular car you're looking at is perfect, of course, but I don't think they would knowingly misrepresent anything about it.
  24. R

    Paxton DIY...How Hard is Install?

    Use the search function and read some of the recent threads on the Paxton kit. Several DIY people have had tuning problems with it as well and aren't happy.
  25. R

    Thanks 2MANYTOYS!!!!!!

    Speaking of seller's remorse, I'm kind of missing my HRE 19's lately too. . . :( But I'll get over it.

Latest posts

Members online

Total: 1,653 (members: 8, guests: 1,645)

Forum statistics

Threads
153,663
Posts
1,685,352
Members
18,254
Latest member
Puntacanaviper

Share this page

Top