Search results

  1. M

    Skip Barber Course Impression

    you posted the schedule for the advanced class not the begineer class . When i talked to skip Barber people they would have let me go to advanced, but when i told them that i had no track experience they agreed that beginner best. i now agree whole heartedly i did it right, i learned a the same...
  2. M

    Skip Barber Course Impression

    Just got back from two day beginer course. The instructors were great. buti was better than 3 times older than the group of 12. I learned more than i ever thought possible in two days. stopping with and without ABS. Lane and emergency lane changes. Hell toe breaking, skid pad, road course on the...
  3. M

    Security system in Viper???????????

    i got locked out of my viper 04 and dealer cut me a key which was great. BUT i then locked with the electronic key pad and opened car door with key and started without using key pad. the key does not have chip as most cars, and it means any dumb thief could steal it.. Anyone have suggestions how...
  4. M

    Corsa Track Exhaust Tips touch when hot

    I had the same trouble with Belangers, can't comprehend that they don't tell you in the instructions, or cut it off. ( :confused:
  5. M

    Wrecked '04 SRT on ebay

    Re: Wrecked \'04 SRT on ebay long story can't say on net e-mail phone #
  6. M

    Wrecked '04 SRT on ebay

    Re: Wrecked \'04 SRT on ebay The viper in Miami was mine there is some frame damage cost to repair was over 50,000 so the insurance totaled the car. it might not have salvage on title i don't know,the car has 1,200 miles on it.replaced with a my Mamba i love and get thumbs up very where i go it...
  7. M

    Dyno"d my Mamba 700 miles new Blanger headers and cats side pipes

    Re: Dyno we always used your formular and then in talking to dyno jet when installing a new wide band O2 in the system found out that they suggested using 110% than the 90% divide moot point. the difference is not much.
  8. M

    Dyno"d my Mamba 700 miles new Blanger headers and cats side pipes

    Re: Dyno\"d my Mamba 700 miles new Blanger headers and cats side pipes my calulator works fine 470x110=517 450x110=495 check yours
  9. M

    Dyno"d my Mamba 700 miles new Blanger headers and cats side pipes

    Re: Dyno\"d my Mamba 700 miles new Blanger headers and cats side pipes Just got off phone with Lou Belanger about horse power from his system he is a real bright guy. knows a hole bunch about racing, designing, and dyno's. He said that the PCM must learn what you have (changes that you have...
  10. M

    b&m ripper shifter #45053 universal tremec t-56 short throw

    if you look in Summit Catalog they sell a B&M shifter for vipers they fit gen II and GenIII vipers i have installed on a 2001, and 2004 about 1.5 hours with very little problems.
  11. M

    please tell me what i was going up against

    Could have been me i drive a 33 ford vicky with a 421 cu. in. chevy (350 b/4) fuel injected NOS 300 shot on motor mid 11's i afraid to put the full 300 on but can get into 11 flat with shot 456 hp with 100 shot to rear wheels.
  12. M

    K &N Filters for SRT/10?

    Interesting i got my filters from jonB but they were shipped by Archer Racing. Summit sells them for 307.00 and shipping is 7.95 I believe we should our suppliers as long as they are competitive. took 15 minutes to install most of the time spent opening battery box and closing it. i can't see...
  13. M

    B&M shifter any use it with 2003-2004 viper

    Dan i did know it would work had on another 04 I had, but never tested does help shifting and shorten up shift thank in advance, Steve
  14. M

    Dyno"d my Mamba 700 miles new Blanger headers and cats side pipes

    Re: Dyno Dan and Bill the stock dyno figures seem to be good but when you look at the difference in the headers way less restrictions, smoother turns the cat is half the size the two cats stock and the muffler is half size 3" pipes against 2.5" 20 hp is not much. Bill I hope it improves...
  15. M

    Dyno"d my Mamba 700 miles new Blanger headers and cats side pipes

    Dyno\"d my Mamba 700 miles new Blanger headers and cats side pipes Love my Mamba more looks than I ever got with silver 04. Dyno'd before putting on Blanger System, headers and side pipes 3" the before was great 449 hp. 470 ftlbs. tq. the after SUCKED 470 hp. 490 ftlbs. tq. I have heard that...
  16. M

    B&M shifter any use it with 2003-2004 viper

    in the past I have used a short shifter and it made a great difference has anyone tried it in a 2003-2004? I put it in my silver 2004, but I had no time to try it out.
  17. M

    O2 sensors/ emmissions

    Installed a set of Hennessey headers (B&B) and 1/2 cat 3" exhaust the engine light showing the engine came on the headers were also jet hot coated any trick to shut off the code light. Will car pass emmissions with headers???????
  18. M

    Best HP for my Buck$$??

    I have met Doug Levin and he is a class act, his shop is large and full of Vipers. His help is good (I know him from a previous employment with a boat engine builder.) The work is first class and Doug is a wealth of Knowledge on all types of drag racing. Super chargers are one way to go it is...
  19. M

    Drag tires for an '01 Viper

    Re: Drag tires for an \'01 Viper BFG makes a 315 35R 17" Drag radial, I put on a set on my street rod yesterday and can see a lot of difference. You must set up the pressure in tires do a burn out see how much of tire is contacting ground if middle is not touching add air 2 lbs. at time , if...
  20. M

    DYNO YOUR CAR IN BOCA RATON FL.

    I just left the shop that does work on my two street/drag rods. They will do the work on my Viper. They have a Dyno-Jet dyno and I suggested that we could have the VCA club do some pulls. George the owner suggested that he could do a Deal. 3 PULLS for $45.00 if we get a number of cars. He will...
  21. M

    What are everybodies fastest 1/8 of a mile times?

    Doug, I hpe you understand same car with auto trans needs more power to get same speed/et you lose at least an extra 10% threw the trans. I Ran 118 MPH in the 1/8, and 150 MPH in the 1/4 - Too much heat, second time out on the track with my Supercharged/Injected Viper. The clutch was slipping...
  22. M

    THERMOSTAT 180 DEGREE

    Wayne thank you for the cook book on how to do can you give me the PART #??? To GTS Bruce I agree on no warrantee, and it should make more HP. That will be logged for posterity. JonB I won't hold it against you , you are one of the most knowledgeable people on Viper I have seen on the Net, But...
  23. M

    THERMOSTAT 180 DEGREE

    Where can I get a 180 degree thermostat for 01 Viper. I know many people sell them. My CAR IS NOW IN PRODUCTION
  24. M

    I NEED HELP MOVING/AND HOW LONG

    Doug thanks for your offer what I need is a Dodge dealer to have car shipped from Factory to Florida instead of Mass. I will be down to see your shop in a week or two.
  25. M

    I NEED HELP MOVING/AND HOW LONG

    I have watched and participated for the last few months but never have seen this Question answered.1. I have just received my 8 digit vin#. Now how long????? 2.I am trying to get the Viper diverted from My Boston Dealer to a dealer in Southern Fl. Delray/Boca area. Anyone know a good dealer...

Latest posts

Staff online

Members online

Total: 2,008 (members: 9, guests: 1,999)

Forum statistics

Threads
153,698
Posts
1,685,551
Members
18,291
Latest member
Motormax

Share this page

Top