08 hood heat extractor grills
- Thread starter RikRok
- Start date
Steve M
Enthusiast
Yes, they use the standard "Christmas Tree" plastic push pins. When I removed mine, I made sure to get them nice and hot first by taking the car for a drive and really letting them heat soak to make sure they were a little more pliable. Just be gentle (but firm), and you should be able to remove them all without breaking anything.
Two tips:
1. Put a large towel down over the engine bay to catch the push pins as they come out so they don't fall somewhere you wouldn't want them
2. Do not reuse the push pins - you can get new ones here (they come in packs of 50): https://www.clipsandfasteners.com/Weatherstrip-Retainers-Chrysler-Neon-p/pas5609-50.htm
Two tips:
1. Put a large towel down over the engine bay to catch the push pins as they come out so they don't fall somewhere you wouldn't want them
2. Do not reuse the push pins - you can get new ones here (they come in packs of 50): https://www.clipsandfasteners.com/Weatherstrip-Retainers-Chrysler-Neon-p/pas5609-50.htm
daytonaman
VCA Venom Member
What about the grills themselves? Any link to buy those?
Steve M
Enthusiast
https://www.viperpartsrackamerica.com/index.php/products/2008-2010-dodge-viper-srt10-hood-screen-set
$800. Part numbers are listed, and looks like you *might* be able to source them for around $75-80 ea.
Bottom line: not something you want to break or lose.
$800. Part numbers are listed, and looks like you *might* be able to source them for around $75-80 ea.
Bottom line: not something you want to break or lose.
