1st gear to 4th gear shifting

Dustman

Viper Owner
Joined
Jun 7, 2008
Posts
169
Reaction score
0
Location
Sweet Home Alabama
Howdy everyone,

since I'm newbie to this 'Snake-handling-thing' :D I was wondering if ANYONE can fill me in about the 1st to 4th gear shifting it does on occasions :dunno:

I'm kinda lost since I've NEVER experienced anything like it in any other previous car I have driven.

Thanks for bearing with me and my stupid question(s) :2tu:
 

V10SpeedLuvr

Enthusiast
Joined
Apr 3, 2005
Posts
15,320
Reaction score
4
Location
Daytona Beach, FL (Port Orange)
Not a stupid question. Sounds like the stupid skip-shift that Dodge had to put in it to keep the government happy b/c of fuel requirement regulations. Just give it more gas and you'll be able to shift from 1st to 2nd like normal. I've put over 30k on my Viper and never went 1st to 4th.
 

CPPRHD265

Enthusiast
Joined
Sep 26, 2007
Posts
288
Reaction score
0
You know, we got a sticky on how to join the VCA... How about a sticky of *typical* new owner questions. You know, the stuff that seems to pop-up every couple of weeks? Kinda like a new owener FAQ of sorts.

Now, that said, I'd love to do it... but am myself a fairly new owner... Though I've joined the blown motor club already (not really my fault, honest!).
 

RobZilla

Enthusiast
Joined
Nov 18, 2007
Posts
1,588
Reaction score
0
Location
Jacksonville, FL USA
Maybe that thread just needs a new title so the new guys can find it. Wonder if the mods will ever consider a "Newbie" section. A place to welcome all those no matter what generation car they bought. Everyone remembers when they got their first snake. Working the kinks out and getting used to the quirks and power.

Just a thought, IMO that would be a great new addition to the forum. :2tu:

:eater:

:usa:
 
OP
OP
D

Dustman

Viper Owner
Joined
Jun 7, 2008
Posts
169
Reaction score
0
Location
Sweet Home Alabama
That was a GREAT thread to read ViperTony - THANKS ! :2tu:

RobZilla got a great point - I bet a lot of members here get sick and tired of reading the Newbie's stupid questions every other week ;)
 

V10SpeedLuvr

Enthusiast
Joined
Apr 3, 2005
Posts
15,320
Reaction score
4
Location
Daytona Beach, FL (Port Orange)
I think this is the forum for newbies. Afterall, it is called "New Owner Questions" :D I think the idea of a sticky with a newbie FAQ is a good idea. Why don't we start working on common questions and answers and I'm sure one of the mods won't mind making it a sticky.
 

RobZilla

Enthusiast
Joined
Nov 18, 2007
Posts
1,588
Reaction score
0
Location
Jacksonville, FL USA
True, it is in the New Owner Questions section. I think everyone would agree that a sticky would help keep the common question thread at the top of the list. As new people come, they would be nearly forced to click on it if it had a catchy sticky title.

Meanwhile we will keep helping the newbies along and noting the common questions.

My favorite is the "Idle Shake". Your snake comes with 10, count em TEN cyliders. Its gonna idle rough especially if you have an early Gen II with the lumpy cam. Put your girlfriend in it and tell her to enjoy herself while it warms up. :rolaugh:

:usa:
 

bluequadcab

Enthusiast
Joined
Jan 27, 2008
Posts
1,242
Reaction score
0
Location
CT
Howdy everyone,

since I'm newbie to this 'Snake-handling-thing' :D I was wondering if ANYONE can fill me in about the 1st to 4th gear shifting it does on occasions :dunno:

I'm kinda lost since I've NEVER experienced anything like it in any other previous car I have driven.

Thanks for bearing with me and my stupid question(s) :2tu:

You can get a shift skip eliminator off Ebay, I put one on my Gen 1, looks like a little resistor, and won't give you any check engine lights or codes. Just be careful not to give it too much gas in too low a gear or you will get in trouble like I did as soon as I drove it after install.
 
OP
OP
D

Dustman

Viper Owner
Joined
Jun 7, 2008
Posts
169
Reaction score
0
Location
Sweet Home Alabama
You can get a shift skip eliminator off Ebay, I put one on my Gen 1, looks like a little resistor, and won't give you any check engine lights or codes. Just be careful not to give it too much gas in too low a gear or you will get in trouble like I did as soon as I drove it after install.

Now THAT sounds like an interesting gadget ! :D


Is it called a 'shift skip eliminator' ?


I guess I'll go look for one of those ? How does it install BlueQuad ?
 

bluequadcab

Enthusiast
Joined
Jan 27, 2008
Posts
1,242
Reaction score
0
Location
CT
Now THAT sounds like an interesting gadget ! :D


Is it called a 'shift skip eliminator' ?


I guess I'll go look for one of those ? How does it install BlueQuad ?

Here is a link to one: eBay Motors: Skip Shift Eliminator LT1 LS1 LS2 Plug and Play (item 120273711269 end time Jun-23-08 11:48:33 PDT)
Or look up item #120273711269
The one I bought was cheaper but didn't have the nice plug in connector on it. It came with directions. You jacked up your car and crawled underneath, and located the C.A.G.S. plug on your transmission. Pulled apart the connector, inserted one end of each side of the resistor in the wiring harness and taped it up with electrical tape so no water, dirt, etc. gets in. Then tape up the solenoid so that will stay clean. That's it, your done. This is nicer because it already has a connector on it. I would just email the seller and ask if the connector fits your year of Viper.:eater:
 

V10SpeedLuvr

Enthusiast
Joined
Apr 3, 2005
Posts
15,320
Reaction score
4
Location
Daytona Beach, FL (Port Orange)
I've heard you can buy the stuff you need to make a skip shift for about $0.50 from Radio Shack. I'm not sure why you (or anyone else) needs it though. Just give it a little more gas and shift as normal.
 

bluequadcab

Enthusiast
Joined
Jan 27, 2008
Posts
1,242
Reaction score
0
Location
CT
I've heard you can buy the stuff you need to make a skip shift for about $0.50 from Radio Shack. I'm not sure why you (or anyone else) needs it though. Just give it a little more gas and shift as normal.

You could make your own from radio shack if you know the right resistance. Where time is money, it's cheaper to just buy it on ebay and not have to leave your house and waste gas and time. As far as needing it, it's a standard transmission and I want to shift in whatever gear I want and shift when I want to and not loose all my RPM. Plus, it's a lot easier on the girlfriend with the smooth shifting and for times when your cruisin' slow by the beachside. Just IMHO. :drive:
 

Cobraken

Enthusiast
Joined
Apr 13, 2004
Posts
799
Reaction score
0
Location
Southern Oregon
I've used both the bare resistor and the plugged skip shift eliminators. They both work. Liked the plugged one for the fact it's all sealed and didn't have to worry about it coming loose or getting wet etc. It looks like it belongs.
 

viperrt

Enthusiast
Joined
Jul 8, 2002
Posts
81
Reaction score
0
Location
Poway, CA, USA
Before someone jumps on my post, yest I did a search but did not find SPECIFIC information. Is there a skip shift eliminator available for the '08 with the new tremec transmission? Does the eliminator used for the old temec work on the new model?

Thanks, Bill
 

Westxsrt10

Viper Owner
Joined
Jun 12, 2007
Posts
209
Reaction score
0
Location
Boise, Idaho
Before someone jumps on my post, yest I did a search but did not find SPECIFIC information. Is there a skip shift eliminator available for the '08 with the new tremec transmission? Does the eliminator used for the old temec work on the new model?

Thanks, Bill

I bought the 06 'skip-shift' for my 08 Viper and it worked just fine.
 

Westxsrt10

Viper Owner
Joined
Jun 12, 2007
Posts
209
Reaction score
0
Location
Boise, Idaho
I agree I don't see the need.:dunno:

Glen

Glen, have you driven a new 08 to compair? I can't beleive how it grabbed hold of the shifter and placed it in the wrong gear. My 07 zo6 never did that.

________________
08 GTS Viper blue coupe, Belanger header system
05 SRT-10 Reg. Cab Ram, modded
 

Glen97

Enthusiast
Joined
May 7, 2006
Posts
438
Reaction score
0
Location
Valley Springs, CA
Glen, have you driven a new 08 to compair? I can't beleive how it grabbed hold of the shifter and placed it in the wrong gear. My 07 zo6 never did that.

________________
08 GTS Viper blue coupe, Belanger header system
05 SRT-10 Reg. Cab Ram, modded

No I havent, I had a 96 RT/10 and now have a 97 GTS. I just have never had any issues with the 1-4 shift.

Glen
 

ViperGal

Enthusiast
Joined
Jan 6, 2008
Posts
908
Reaction score
0
Location
Dripping Springs, TX
You could just delay your shift out of first ... or call John B and get 3.33s ...

fwiw ... it drove me absolutely crazy the first week until I changed my shift habit - haven't noticed it since.

Drive on!:drive:
 

mike & juli

Enthusiast
Joined
Sep 21, 2005
Posts
11,715
Reaction score
0
Location
Upstate NY
I've heard you can buy the stuff you need to make a skip shift for about $0.50 from Radio Shack. I'm not sure why you (or anyone else) needs it though. Just give it a little more gas and shift as normal.

:2tu: Yep, same here. NO problem with the 1-4 shifts. But, if needed, the viperstore DOES have the '08 skip-shift-eliminator, as previously mentioned. :cool: :drive: ~juli
 

Latest posts

Forum statistics

Threads
153,647
Posts
1,685,251
Members
18,225
Latest member
Estespropaint
Top