2 PIECE ROTORS

[Fast Too]

+1 on adding stainless steel lines. I got mine through Stoptech/Partsrack. If you will be doing some track time, might be a good idea to go to Motul RBF 600 or comparable brake fluid:

FYI, the Motul RBF 600 is the factory fill on the Viper Competition Coupe.

/Rich

Forgot about that, I used that to when I flushed and refilled the system after changing the lines. I also added SS Speed bleeders.

 

[rcl4668]

Forgot about that, I used that to when I flushed and refilled the system after changing the lines. I also added SS Speed bleeders.

Fast Too --

A question, I am still unclear on what the Speed Bleeders do. Do they allow you to bleed the ABS-equipped brakes on the 2003-2008 Vipers yourself or do you still need a special scan tool/device to pump the ABS system to do an effective brake bleed? I will be going to my Viper Tech to have this work done before track days because it was my assumption (perhaps incorrect) that you needed this device to "pump" the ABS system when bleeding the 2003-2008 brakes.

/Rich

 

[Fast Too]

You can bleed the system yourself with these very easily. Be careful to not allow the reservior to go dry and trap air in the system. Turkey baste out most of the the fluid in the reservior first. Fill it. Start with right rear corner outer, then inner, move to left rear and start with outer then inner, move to front right and repeat process, and then finish with drivers front. Make sure to keep the reservior topped at all times. Doing so you should have no issues with the ABS system. Speedbleeders are the way to go for a one man show. If you get them spend the extra few dollars and get the SS ones. The standard ones are cadium plated and will rust eventually.

 

[MikeR]

HAHAHA out of the home business? Anyone who wants to see our "out of the home" business is more then welcome to stop by our brand new 3,500sq ft. facility at

Euroteck Motorsports
4324 NW 120th Ave
Coral Springs, FL. 33065


Funny thing is, you wanted a trusted name, yet whoever told you that lie you were trusting and they just said that to get your business. Instead of talking the truth about a product they act like a salesmen just to gain your businss on what they sell. Which i do not consider trust. But its not like i do not know who said it anyway.....

Anyone who has a question on our wonderful brakes, please ask Doug Levin, Woodhouse, underground Racing, or many cars at Viper Days events how they feel running our brakes. All the names above have installed and sell our brakes and are very happy with them.

Well If Im completely wrong I apologize. I was giving MY opinion on what I heard, never stated as fact. This was told to me by one tuner, one vendor and a few people that Pm back and forth.

What I do know as fact is you have only been making Viper Rotors for ONLY a year. You used to play with Mercedes. The Viper was your first sports car and manual transmission.Your a young kid. I heard that you ran your business out of your parents house. If you finally got a shop and are able to make a good business out of it thats great. Many started small and became huge. Best of luck. I just wanted a trusted name thats been here for many years and will continue to be here for years. Stoptech is even used by Dodge on the ACR , so all the better.

I will admit your rotors are beautiful and looks wise , beat out the stoptech. We will see how your rotors do over the next few years, hopefully they work well and it will give Viper owners another choice of aftermarket rotors. Until then I'll stick to a trusted name.

 

[YellowViperSRT10]

Well If Im completely wrong I apologize. I was giving MY opinion on what I heard, never stated as fact. This was told to me by one tuner, one vendor and a few people that Pm back and forth.

What I do know as fact is you have only been making Viper Rotors for ONLY a year. You used to play with Mercedes. The Viper was your first sports car and manual transmission.Your a young kid. I heard that you ran your business out of your parents house. If you finally got a shop and are able to make a good business out of it thats great. Many started small and became huge. Best of luck. I just wanted a trusted name thats been here for many years and will continue to be here for years. Stoptech is even used by Dodge on the ACR , so all the better.

I will admit your rotors are beautiful and looks wise , beat out the stoptech. We will see how your rotors do over the next few years, hopefully they work well and it will give Viper owners another choice of aftermarket rotors. Until then I'll stick to a trusted name.

HAHAHAHA I am sorry I just don't know where to even start! Now if this was true, I would have no problem. LOL but this is quite possibly the funniest thing I have read about a so called truth in my entire life! LOL Ran a businss out of my parents house! LMAO!!!! We have been in busines for over 6 years and from day one always had a shop. The quote "if you finally got a shop" is cracking me up. I mean I would love to know the so called "many" people you are PMing that like to spread this false information. Please do share this with me so I can kindly tell them the truth. So if you do not mind, plesase let me know the tunner and vendor who told you this information, so I can provide them with accurate information. In no way should this be kept a secret if they have the wrong information.

 

[dave6666]

Well If Im completely wrong I apologize. I was giving MY opinion on what I heard, never stated as fact. This was told to me by one tuner, one vendor and a few people that Pm back and forth.

What I do know as fact is you have only been making Viper Rotors for ONLY a year. You used to play with Mercedes. The Viper was your first sports car and manual transmission.Your a young kid. I heard that you ran your business out of your parents house. If you finally got a shop and are able to make a good business out of it thats great. Many started small and became huge. Best of luck. I just wanted a trusted name thats been here for many years and will continue to be here for years. Stoptech is even used by Dodge on the ACR , so all the better.

I will admit your rotors are beautiful and looks wise , beat out the stoptech. We will see how your rotors do over the next few years, hopefully they work well and it will give Viper owners another choice of aftermarket rotors. Until then I'll stick to a trusted name.

HAHAHAHA I am sorry I just don't know where to even start! Now if this was true, I would have no problem. LOL but this is quite possibly the funniest thing I have read about a so called truth in my entire life! LOL Ran a businss out of my parents house! LMAO!!!! We have been in busines for over 6 years and from day one always had a shop. The quote "if you finally got a shop" is cracking me up. I mean I would love to know the so called "many" people you are PMing that like to spread this false information. Please do share this with me so I can kindly tell them the truth. So if you do not mind, plesase let me know the tunner and vendor who told you this information, so I can provide them with accurate information. In no way should this be kept a secret if they have the wrong information.

I'm pulling for the yellow corner.

Will however be certainly keeping an eye out for a strong comeback from the red corner.

 

[YellowViperSRT10]

I'm pulling for the yellow corner.

Will however be certainly keeping an eye out for a strong comeback from the red corner.

I'm not trying to start an argument here. In fact, that's the last thing i want. I simply just want the people with the wrong info to get the correct info. That's all.

 

[Nader]

At this point you addressed the inacuracies of Mikes comments on this board. To ask for the names of the people and tuner is a bit silly. Dont you think?

I'm not trying to start an argument here. In fact, that's the last thing i want. I simply just want the people with the wrong info to get the correct info. That's all.

 

[YellowViperSRT10]

At this point you addressed the inacuracies of Mikes comments on this board. To ask for the names of the people and tuner is a bit silly. Dont you think?

Honestly, I would just like to contact those people, and in a nice way, let them know they do not have the accurate info, and i can provide it to them. Mike did nothing wrong but pass along what he heard. The people who started these statements are who need to be corrected. Problem is, in this world we have many jealous people, and they will say anything they can to a customer to earn their business. And worst of all, the customers sometimes believe everything they hear, even if it is not the truth, but act as if it is a fact.

If someone was spreading a lie about you, I am sure you also like to know who started it.

 

[Peter Nielsen]

At this point you addressed the inacuracies of Mikes comments on this board. To ask for the names of the people and tuner is a bit silly. Dont you think?

That depends on the purpose of the question:

Do you (=the one that asks the question) believe that the people actually exist: Silly question.
Do you believe that these people (or their comments) are made up: Good question.

What he really said is: "If these people exist, I would like to contact them".

It's all about reading between the linse...

 

[Chuck 98 RT/10]

Just curious, do more holes = prettier?

 

[rcl4668]

Just curious, do more holes = prettier?

Chuck, I'm not even going to touch that one . . .

/Rich

 

[Fast Viper]

.....like these?

You must be registered for see images attach

You must be registered for see images attach

I really like the euroteks...I think the hats look nicer than the stop techs. I would have gone with them if they were available "drilled only". As a matter of fact, they originally were available in "drilled only" using stop tech aero rotors, but some a-hole(might be the same guy who told MikeR that eurotek is a comnpany run out of some guys garage), who had some pull with stop tech, put the kibosh on that deal. That guy *****

drilled does not...more/better pics to come

Thanks LOVE IT!

 

[STREET DOC]

VERY INFORMATIVE THANK YOU !

 

[red heat]

I purchased 2 piece 14" slotted rotors from Roe Racing. these are the slotted rotors in their big brake upgrade for Gen 2 vipers. No regrets. Much cheaper. I get in about 6-7 track days a year. NO Problems on the track.

 

[RTTTTed]

Likewise, I bought Sean's 14" big brake kit and installed it over the winter. Best price I could find. I used caliper paint and painted them med. blue so that they'd be a closer match to my Sapphire Car. Sean only sells slotted because the drilled ones have a tendency to heat check or crack under hard useage.

Ted

 

[Nine Ball]

Mike, when you state things such as "working out of his house" etc... without knowing the facts, all that does is relay bad information to those reading it. Being helpful is one thing, but it is all in how you say it. The way you wrote it sure looked like you were stating it as fact.

I'm happy with my Eurotek rotors, and I also agree they look nicer than Stoptech rotors. I prefer the gray hats and the cut-away sections where they bolt to the disk. I've had the car on two racetracks (using EBC red stuff pads) and they work excellent.

You must be registered for see images

You must be registered for see images

 

[dave6666]

I'm not trying to start an argument here. In fact, that's the last thing i want. I simply just want the people with the wrong info to get the correct info. That's all.

I'm impressed with you defending your product. Because I'm fixing to buy some of your rotors. Would hate to have seen you take the lay down stance.

Honestly though, this thread gone wild, very similar to ones where Jon B's friends and enemies have it out, has quite likely been great on your business!

This is 50% of your advertising for this week, and it is FREE!

 

[HI-NOS-Viper]

Dave is very correct, honestly before this thread I have not even heard of the euroteck's as an option. Now in fact they are a definite consideration over the stop techs. Advertising at its best.

 

[red heat]

drilled rotors are "old technology"

 

[ViperTony]

Honestly, I would just like to contact those people, and in a nice way, let them know they do not have the accurate info, and i can provide it to them. Mike did nothing wrong but pass along what he heard. The people who started these statements are who need to be corrected. Problem is, in this world we have many jealous people, and they will say anything they can to a customer to earn their business. And worst of all, the customers sometimes believe everything they hear, even if it is not the truth, but act as if it is a fact.

If someone was spreading a lie about you, I am sure you also like to know who started it.

I'm glad to see you're here on the forums defending, describing your rotors. I'm certainly interested in them and will consider them when I get into my brake upgrade. As for the incorrect information being spread around I would guess it's your competition trying to prevent a lost sale. As an experiment, you should try calling some of the site sponsors here that sell your competition's rotors and see what they have to say about EuroTeck. You may be surprised at what you hear.

 

[viperbilliam]

"a bit silly" - nah, contacting them would be good business if Euroteck can sell them their product in addition to setting them straight. Heck, even JonB might want to carry their stuff too. Are EBC Reds are good for street only applications?

 

[ILLSMOQ]

"a bit silly" - nah, contacting them would be good business if Euroteck can sell them their product in addition to setting them straight. Heck, even JonB might want to carry their stuff too.

I don't think he could if he wanted to

I wish Neal at Eurotek great success with his business

 

[ACR VYPR]

Dave is very correct, honestly before this thread I have not even heard of the euroteck's as an option. Now in fact they are a definite consideration over the stop techs. Advertising at its best.

A real great advertisement would be to post deal on a set of four (My VOI9).

 

[YellowViperSRT10]

I'm impressed with you defending your product. Because I'm fixing to buy some of your rotors. Would hate to have seen you take the lay down stance.

Honestly though, this thread gone wild, very similar to ones where Jon B's friends and enemies have it out, has quite likely been great on your business!

This is 50% of your advertising for this week, and it is FREE!

Well thank you. I try very hard to build strong reputation and do whatever it takes to make sure my customers are happy. So when I see a big fat lie posted on a forum that was clearly told to them by a competitor, I will not just sit back and watch it spread like wildfire. I don't talk bad about competitors products. I still believe Stoptech, Brembo, etc... are very good products and all have their strong points.

I work really hard to make sure a customer is happy at the end of the day. I always give customers my cell phone # so they can contact me any time of the day, or even weekend. I never had anyone on any forum talk bad about our products or service, because I do whatever it takes.

I wasn't going to say anything, but just from this thread alone, I have 4 orders for our brakes. So yes, your are 100% correct! haha it is free advertising!

Thank you everyone for the support and understanding, I am glad to see customers and potential customers happy, and will consider our product in the future.

 

[YellowViperSRT10]

I don't think he could if he wanted to

I wish Neal at Eurotek great success with his business

LOL!

Btw, thank you!

 

[YellowViperSRT10]

"a bit silly" - nah, contacting them would be good business if Euroteck can sell them their product in addition to setting them straight. Heck, even JonB might want to carry their stuff too. Are EBC Reds are good for street only applications?

EBC Red are more of a street pad then track pad. If you plan to track the car a lot, go for a different pad such as the Yellow.

 

[BLWNGTS]

Question on the Eurotecks... where are they made and with what type of metal?!!?

Thanks

 

[VIPER BAZ UK]

And are they available for the Gen 2 fronts yet.....
i Need Gen2 fronts and Gen3 fronts....

This thread could work in your favour and get you more sales...
Good luck..

 

[HI-NOS-Viper]

Do I hear group buy??