22's?

[TheLongPedal]

I've been looking at some of the vipers with 20 inch wheels and have noticed that there is still some room in the back for a bigger wheel. Has anyone ever done a 21 or 22 inch wheel in the back and 20 up front?

 

[GTSNRT10]

20" is the begining and the end for the Viper PERIOD

 

[TheLongPedal]

HAHA Understandable.

I guess I could ask my next question... If I order a 20x13. What offset should I get?

19x10 offset for the front?

 

[DodgeViper01]

HAHA Understandable.

I guess I could ask my next question... If I order a 20x13. What offset should I get?

19x10 offset for the front?

Go with stock offsets only! I have seen 22 inch wheels on a Viper and it looks WRONG! I would say not to go higher than 20 and realistically 19 should be highest.

 

[TheLongPedal]

I was looking at Gary Javo's old b/w gts. It had a 19/20 combo but it didnt seem like the offset was aggressive enough, more so in the front.

What would the stock offset's be for say the gen 3 wheels?

 

[TheLongPedal]

You must be registered for see images attach

take this one for example. that front wheels seems to me it doesnt poke far enough. i feel that it needs to sit flush with the hood.

 

[GTSNRT10]

20/20 or 20/19 TRUST ME I forged is a sponsor here & I'm a stocking dealer I have a couple 20/19 sets in stock so PM me if interested

You must be registered for see images attach

You must be registered for see images attach

 

[TheLongPedal]

Even though I really do enjoy the iforged line, I'm the kind o fguy that likes to step outside the box when it comes to modifying my vehicles.

I have a very special set of wheels in mind...

20x13 rears
19x10/11? fronts

 

[Luke@tirerack]

it is a bad idea to use staggered diameter wheels on Gen 1 or 2 Vipers as it will have an adverse effect on handling

 

[Luke@tirerack]

20/20 or 20/19 TRUST ME I forged is a sponsor here & I'm a stocking dealer I have a couple 20/19 sets in stock so PM me if interested

You must be registered for see images attach

You must be registered for see images attach

nice cars ... the lawn however is another story all together

 

[TheLongPedal]

HAHA! It could use a good mow, thatch and seed eh?

 

[Burntrubber]

22's...really.
I personally think 18/18 or 18/19 & lowered look best. 20s just look like your trying to hard.

 

[TheLongPedal]

I think 18's look stock.

19's look good, but I just don't think they fill the wheel wells enough.

20's to me seem perfect, and if you consider 20's trying to hard I guess you could put owning a viper in general in the same category. But to each his own.

I never said I wanted 22's, was just curious.

 

[GTSNRT10]

it is a bad idea to use staggered diameter wheels on Gen 1 or 2 Vipers as it will have an adverse effect on handling

I have seen ZERO adverse effects with 19/20 What do you mean?

 

[GTSNRT10]

nice cars ... the lawn however is another story all together

It's called priorities, or is it lack of...

 

[GTSNRT10]

22's...really.
I personally think 18/18 or 18/19 & lowered look best. 20s just look like your trying to hard.

I bet you're over 50?!?! Am I right

 

[Burntrubber]

I bet you're over 50?!?! Am I right

just turned 30, 18/19 on a genII still keeps the focus on the car and not the rims. I just think you start to take away from the body of the car when you start getting any larger than that. May be trying to hard is the wrong saying. They still look better than my stock 17s

 

[Red Snake]

If you haven't seen 20s front and rear on a Viper IN PERSON, you might want to try to find someone near you before you drop some coin. I saw 20's/20s in person and they looked HUGE.

I'll be going 19"/19" when I get my rims.

 

[PacificSEASnake]

Why stop at 22"? - go for a set of 26"/28" DUB Spinners. http://http://superbuytires.com/DUB/Presidential%20Spinner/?v=&diameter=&w=&p=1&s=20&suggested=&p1=&p2=&finish=

Not too many track tires available, but it's for posing anyway, right?

 

[Burntrubber]

If you haven't seen 20s front and rear on a Viper IN PERSON, you might want to try to find someone near you before you drop some coin. I saw 20's/20s in person and they looked HUGE.

I'll be going 19"/19" when I get my rims.

Do you know which ones you are going to get?
I saw a 18/19(?) set up that looked awesome HRE 590s I think.
Had a photoshoot with the Viper. - Viper Alley - Dodge Viper Forum

 

[Nader]

Not sure about Gen I or II but the 19 and 20 setup for Gen IIIs is perfect in my opinion, Especially when lowered. In fact the ride quality and handling is vastly improved since you remove a ton of weight from stock runflat setup.

 

[Burntrubber]

Not sure about Gen I or II but the 19 and 20 setup for Gen IIIs is perfect in my opinion, Especially when lowered. In fact the ride quality and handling is vastly improved since you remove a ton of weight from stock runflat setup.

Looks good Nader, I think the GenIIIs can handle a larger rim, maybe its the newer body
I like the 5 spoke, probably the best looking in my opinion on a GenIII.

 

[Ricketts]

20/20 or 20/19 TRUST ME I forged is a sponsor here & I'm a stocking dealer I have a couple 20/19 sets in stock so PM me if interested

If anyone is looking to get some Iforged for your car, Matt here is the man. I got my 19/20 Iforged combo from him for my 01 GTS and couldn't be happier. My buddy with a 96 GTS wasn't even considering aftermarket wheels for his car, until the weekend when we went to the dragstip and everyone was walking past his car to come check mine out

 

[unreelviper]

Matt, you are definitely the man when it comes to purchasing Iforged wheels. My 20/20 setup on my SRT-10 is perfect!!! Thanks Again, Mike

 

[Red Snake]

Do you know which ones you are going to get?
I saw a 18/19(?) set up that looked awesome HRE 590s I think.
Had a photoshoot with the Viper. - Viper Alley - Dodge Viper Forum

I am looking at CCW SP600s in 19"/19".

 

[Nader]

Looks good Nader, I think the GenIIIs can handle a larger rim, maybe its the newer body
I like the 5 spoke, probably the best looking in my opinion on a GenIII.

thanks for the compliments. Funny I am headed to Phoenix tomorrow for a conference. I am staying at Scottrsdale Resorts.

 

[GTSNRT10]

Do you know which ones you are going to get?
I saw a 18/19(?) set up that looked awesome HRE 590s I think.
Had a photoshoot with the Viper. - Viper Alley - Dodge Viper Forum

FWIW Those are the wheels I sold to Michael B. 20" front and rear I forged Daytona's full polish

 

[GTSNRT10]

If anyone is looking to get some Iforged for your car, Matt here is the man. I got my 19/20 Iforged combo from him for my 01 GTS and couldn't be happier. My buddy with a 96 GTS wasn't even considering aftermarket wheels for his car, until the weekend when we went to the dragstip and everyone was walking past his car to come check mine out

Thanks man I can't wait to see your car with them on, I'm tempted to mail you my camera

And thanks to you too Mike!! I'm glad you kept your awesome SRT!!

Matt w/ SPEEDWERKZ

 

[ILLSMOQ]

If you haven't seen 20s front and rear on a Viper IN PERSON, you might want to try to find someone near you before you drop some coin. I saw 20's/20s in person and they looked HUGE.

I'll be going 19"/19" when I get my rims.

19's look great on gen I and gen II...untill you see one with 19/20's . Then they start to look a little small.

 

[Burntrubber]

FWIW Those are the wheels I sold to Michael B. 20" front and rear I forged Daytona's full polish

i like the design, i know a guy who has the 547 in a 18/19 and it looks great. 20" definitly fill the wheel wells though