ACRX Cannard install

[goldcup]

Got a set of ACRX canards but have no template for install.
Anyone have an install template?

 

[cubican]

I put a set on my car and I really dont think that there is a set point it just depends on how much down force you need. I can tell you that they do work, it just depends on the angle you set them. heres a pic of the ones on my ride they are set very agressive.

You must be registered for see images attach

 

[goldcup]

Sweeet on that red car!! I can do it w/o but would like an idea of optimum placement.

 

[BlknBlu]

It may take me a few days but I can get you a pic and take a few measurements from one.

Bruce

 

[goldcup]

Thanks Bruce it would be greatly appreciated measure twice drill once!

 

[treesnake]

This is a photo illustrating the position of canards on ACRX.
They are fastened to car with 1/4-3/16 X 3/8 bumper cover rivets.

 

[JohnnyViper]

i cant help you with the placement but I will say they look great on the above cars

 

[mjorgensen Woodhouse]

We happen to be working on an ACRX in my shop, so here is what you need.

You must be registered for see images

​

 

[Viperless]

We happen to be working on an ACRX in my shop, so here is what you need.

You must be registered for see images

That's some great info right there. I also measured 3" from the top edge of the bumper cover to the top of the little canard.

 

[goldcup]

Guess I'll be installing tomorrow! Thanks for all the info!

 

[Andrew2KRT10]

so mwill the ACRX canards fit a gen 2 ?

 

[GTS-R 001]

so mwill the ACRX canards fit a gen 2 ?

YEs they will, I have pics somewhere, PM me your email address and I can send to you

 

[JonB]

so mwill the ACRX canards fit a gen 2 ?

They WILL fit, but the track-speeds downforce you require suggests to go for the large ACR canards

 

[VIPER BAZ UK]

Any pics on a Gen2????????????

 

[67PLY]

FYI........ Anyone else needing this info, I contacted Prefix when I had my unfortunate incident and needed front bumper cover replacement. I e-mailed to Prefix's sales dept, they replied, and in about a week I received paper templates to relocate the dive planes on my 09 ACR........and no charge to boot!
So here's a forum shout out to PREFIX........... THANKS!!!!

Later,

 

[steve911]

FYI........ Anyone else needing this info, I contacted Prefix when I had my unfortunate incident and needed front bumper cover replacement. I e-mailed to Prefix's sales dept, they replied, and in about a week I received paper templates to relocate the dive planes on my 09 ACR........and no charge to boot!
So here's a forum shout out to PREFIX........... THANKS!!!!

Later,

Would it be possible to make and scan a copy to post here for the rest of us to look at and share in your good fortune?

thanks
Steve A.

 

[85 of 200]

Also I have a set of acrx canards if anyone is looking.

 

[steve911]

I know the ACR has 2 canards and the ACR-X has 4. Are the ACR and the lower ACR-X canards the same size and shape? It appears the uipper ACR-X are a different shape.

 

[treesnake]

Also I have a set of acrx canards if anyone is looking.

I'm looking at that old, out of date avatar.....

 

[mjorgensen Woodhouse]

I know the ACR has 2 canards and the ACR-X has 4. Are the ACR and the lower ACR-X canards the same size and shape? It appears the upper ACR-X are a different shape.

Yes they are the same, the X's uppers are unique

 

[85 of 200]

I'm looking at that old, out of date avatar.....

There always has to be a smart ass, normally its me.