Anyone running iForged Imola Anthracite by chance?
- Thread starter anton28
- Start date
And.... here you go:
You must be registered for see images
You must be registered for see images
ViperCobra
Viper Owner
- Joined
- Apr 26, 2012
- Posts
- 277
- Reaction score
- 0
^^^ Badass!!! Nice 
Wiretech
Enthusiast
Looks so amazing Dan ,Good job.
Thanks guys. The car turned out great- this was the last one we released before going back to th drawing board on things... if you like this, wait until you see the new version
Believe it or not, the 21/20 setup drives EXCELLENT. You literally cannot tell that you are riding on such tires. I would recommend it to anyone.
That being said, the above setup is riding on 20 profile rears. We have since found a 25 profile rear that we are using now- its even better. The bonus? Pirelli uses goofy tire sizing using section width rather than tread widths. Even though the above is a 375/20/21, the new tire, a 355/25/21, is actually WIDER in actual contact patch by over an inch. Go figure... as if the 375's weren't wide enough already.
All that said... personal preference, I would not run the 20 profile on chrome lips, only black, gray, anthracite, or carbon. It makes it look like a rubber band when you have shadows- but as you can see, it all blends on darker lips.
Believe it or not, the 21/20 setup drives EXCELLENT. You literally cannot tell that you are riding on such tires. I would recommend it to anyone.
That being said, the above setup is riding on 20 profile rears. We have since found a 25 profile rear that we are using now- its even better. The bonus? Pirelli uses goofy tire sizing using section width rather than tread widths. Even though the above is a 375/20/21, the new tire, a 355/25/21, is actually WIDER in actual contact patch by over an inch. Go figure... as if the 375's weren't wide enough already.
All that said... personal preference, I would not run the 20 profile on chrome lips, only black, gray, anthracite, or carbon. It makes it look like a rubber band when you have shadows- but as you can see, it all blends on darker lips.
NO HEMI
Enthusiast
that car looks bad ass!!
denniskgb
Enthusiast
The looks are great but the down side is potholes on the roads. You really have to pay attention......
commandomatt
Enthusiast
I may be partial but.....I really like this body style so much more than the Gen V.
That car just looks sweet....any way you look at it.
Matt
That car just looks sweet....any way you look at it.
Matt
The looks are great but the down side is potholes on the roads. You really have to pay attention......
We have yet to see a bent iForged wheel that didn't involve a curb or a gigantic hole that would have ruined anyone's day in any car. They are not easy to damage at all.
denniskgb
Enthusiast
I agree but still you end up with tires that look like rubber cords.
I am not following you...? Looks aside which is of course subject to personal opinion, if they aren't easily damaged, and they perform as expected... I don't see how that matters? For someone who desires a larger sidewall, run the 25 profile instead, or run a 20", 19" or 18" rear. We have some HORRIBLE roads here, and do not see any rim problems to speak of, in any size or type.
Dan what is the rear offset on your rims?
Dont know off the top of my head, would have to ask iForged.
if its their proffered specs its prop a 56 or 58 then.
