AreT&D's and Mopar roller rockers the same?

[J DAWG]

AreT&D\'s and Mopar roller rockers the same?

Mopar # P5007049 and T&D's. Are these the same. Does one manufacture for the other?

Does anyone use the Mopars? I assume the same issues apply as far as pushrod length is concerned.

John

 

[Ulysses]

Re: AreT&D\'s and Mopar roller rockers the same?

Nope. I believe Mopar's are made by Arrow.

 

[BigCarrot]

Re: AreT&D\'s and Mopar roller rockers the same?

My guess would be Arrow. From what I've heard, they are good rockers, but not quite as good as T&D.

 

[Mark Red GTS Cooper]

Re: AreT&D\'s and Mopar roller rockers the same?

Yes, they are the same, Mopar ones were anadized, but now they are not, but yes, they are the same. This came from the lead engineer at T&D, Arrow are different company,

Mark,, who has T&D,,

 

[1TONY1]

Re: AreT&D\'s and Mopar roller rockers the same?

They look like t&d's to me. Pic did't come up but they are shaft mounted.

VIPER

Race Rocker Arm Assembly

Mopar Performance Parts' Viper rocker arm assembly is tested and proven victorious on the 24 Hours of Le Mans GTS-R. The race rocker assembly features:
· Individual shaft mounted rockers with needle bearings on shafts and rocker tips
· Forged aluminum 1.7 ratio rockers
· Rockers mount to one piece CNC steel billet bar for positive alignment
·12 point aircraft quality mounting hardware and rocker arm adjusters

P5007049 1997-01 RT/10
1996-01 GTS

 

[J DAWG]

Re: AreT&D\'s and Mopar roller rockers the same?

I did a search, but it did not yield any answers.

I was wondering if they were the same style as T&D's.

Is anybody using them?

Thanks

 

[J DAWG]

Re: AreT&D\'s and Mopar roller rockers the same?

So what's the deal with the pushrod length. From reading other posts, I have seen measurements from 7.6 to 7.9.

Do I have to get them on the car and try several sizes?

It seems there would be a way to know upfront which one to use.

 

[Flyin Phil]

Re: AreT&D\'s and Mopar roller rockers the same?

Yes, if you buy the Mopar part, you get T&D roller rockers. I did this myself. Inside the package was both an installation sheet from Mopar and an installation sheet from T&D.

 

[J DAWG]

Re: AreT&D\'s and Mopar roller rockers the same?

Thanx Phil. What about the pushrods. How did you know what length to get?

 

[Vipermed 97.01]

Re: AreT&D\'s and Mopar roller rockers the same?

Phil is correct,T&D manufactures Mopars rollerockers and they are the only way to go,by the way we have a blowout sale on them now for $960.00 shipped......As far as the pushrods the norm for gen2 is 7.7 but confirm your geometry first as they do varie

 

[BigCarrot]

Re: AreT&D\'s and Mopar roller rockers the same?

Anyone ever used DRE rockers? My machinist swears by them and he knows his shnit! I'm thinking of going with them. Check em out! www.dreracing.com

 

[J DAWG]

Re: AreT&D\'s and Mopar roller rockers the same?

Vipermed, Thanks for the confirmation.

So do people normally order a few different length pushrods and then send back the wrong ones or how does it work.

I am not in the mecca of speed shops and I would hate for the car to be out of commision for a couple of weeks while putting these on. I know this probably sounds stupid, but I am still uncertain on the procedure of acquiring the correct length.

Or from what I have read most seem to get the 7.7's and then switch washer sizes to get the correct ratio.

Thanks and that is agood price you have. Maybe it would be better if I just call you tomorrow.

John