cluch problem?

[jeffdai]

When i bent a shifter fork on my 1994, they changed my clutch also. I noticed now when i rev the engine up past 4500 rpm with the clutch in all the way in first gear the car will start going forward at 4500 rpm. I also noticed that i cant shift gears much about 4500 rpm as soon as the rpm drops below that i can shift right in. Any ideas?

 

[Viper Wizard]

It could be a few things? Is the clutch system bled properly [all the air out], slave cylinder working correctly [the travel], did they use a LUK clutch [oem], did they replace the flywheel or did they turn it [hope not?], all bolts tight?

 

[got one]

Wow...ya, check all of those.

 

[FlyBryViper]

Dang Chuck...you forgot to mention he might want to repack his muffler bearings!

 

[carguy07]

Sounds a little like this: http://vca2.viperclub.org/forums/showflat.php?Cat=&Board=UBB14&Number=289457&Forum=UBB14&Words=shift&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=allposts&Main=289348&Search=true#Post289457

Please let us know what you find.

 

[jeffdai]

wow lots to check, ill try bleeding it and also ask them those questions, doesnt feel like the clutch used to, a lot easier to press the pedal now, ill find out what kind they put in it. Really appreciate the ideas of things to check, ill let you guys know what i find out