Gen 5 carbon sill plates?

[cashcorn]

who sells the Gen V's?

 

[JETSTAR]

You must be registered for see images attach

You must be registered for see images attach

Sorry guys I have been out with Sholder surgery but I'm back " with only one arm "
Call me if you have any questions
Thanks
Wayne
Cell 561-307-1521

 

[habeb]

You must be registered for see images attach

You must be registered for see images attach

Sorry guys I have been out with Sholder surgery but I'm back " with only one arm "
Call me if you have any questions
Thanks
Wayne
Cell 561-307-1521

Wayne,

Ok it's Orange, I'm sold. Price please...

 

[cashcorn]

OUTSTANDING! My Silver SRT is heading down the line.. As soon as I get a completion/delivery from SRT or my dealer. I'm calling!

 

[Texas1]

Very nice!!! Wish I would have waited & bought these!!!

 

[JETSTAR]

You must be registered for see images attach

Thought I would share some color with you guys

 

[habeb]

You must be registered for see images attach

Thought I would share some color with you guys

Wayne,

Do we use the existing screws to secure the new sills?

By the way, what are the pieces above the sills in the pic?

 

[mblgjr]

Those pieces certainly appear to be the rear tail light surrounds.

 

[08viperviolet]

They are awesome match perfectly.

 

[habeb]

Wayne,

Thanks for getting the sill shipped. Suppose to arrive Monday, car should be back from the detailer and xpel'd mid-week. By change are you working on splash guards for the front and rear?

 

[orlanderlv]

You must be registered for see images attach

Thought I would share some color with you guys

JetStar, PM me with pricing, availability and how to purchase the carbon fiber sills (with white lettering). They look great.

S

 

[goldcup]

Just an update,I just received jetstars cf sills. He was great to deal with and the sills look amazing I ordered the cf with orange viper lettering to match my TA's interior, it matches perfectly.He does great work and I highly recommend him and the sills. When I get the chance I will be ordering the cf brake ducts.

 

[habeb]

Just an update,I just received jetstars cf sills. He was great to deal with and the sills look amazing I ordered the cf with orange viper lettering to match my TA's interior, it matches perfectly.He does great work and I highly recommend him and the sills. When I get the chance I will be ordering the cf brake ducts.

Received my set (Orange). In terms of installation, everyone is using double-sided tape along the outer edge in conjunction with the factory screws?

 

[08viperviolet]

You must be registered for see images attach

pic of sills

 

[goldcup]

I didn't use double sided tape. Seems ok but I'll drive a bit and see how it goes.

 

[JETSTAR]

Here are a couple of pictures of the T/A with orange letters it really pops

You must be registered for see images attach

You must be registered for see images attach

 

[habeb]

I didn't use double sided tape. Seems ok but I'll drive a bit and see how it goes.

You're right, just installed the passenger side, which did not need double-sided tape. Laid flat against rocker panel. The drivers side would require double-sided tape to hold down the outer rear corner. JETSTAR is sending a replacement piece and will see.

 

[JETSTAR]

Wayne,

Do we use the existing screws to secure the new sills?

By the way, what are the pieces above the sills in the pic?

Yes existing screws and if you want 2 sided tape or I would recommend a few drops of high temp silicone

Yes I am making the rear taillight surround in carbon and the brake ducts. I am just finishing the engine X brace too

 

[habeb]

Yes existing screws and if you want 2 sided tape or I would recommend a few drops of high temp silicone

Yes I am making the rear taillight surround in carbon and the brake ducts. I am just finishing the engine X brace too

PM or email with pricing for the brake ducts. Thanks.

 

[bluesrt]

Yes existing screws and if you want 2 sided tape or I would recommend a few drops of high temp silicone

Yes I am making the rear taillight surround in carbon and the brake ducts. I am just finishing the engine X brace too

- how do the brake ducts remove?

 

[JETSTAR]

PM or email with pricing for the brake ducts. Thanks.

The brake duct kit 4 pieces front and side will be around $2250.00 for the set. It has been one of the most difficult parts to build
these are fresh out of the clear booth and still need to be wet sanded and buffed

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[JETSTAR]

- how do the brake ducts remove?

2 10mm nuts and a dab of silicone on the front next to the window and door it takes me about 30 minutes per side to change them

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

thanks
Wayne

 

[JETSTAR]

We painted 2 pair of the carbon door sills in Stryker Green and built our first carbon fiber X brace for the gen 5 I will post some pic tomorrow

 

[JETSTAR]

You must be registered for see images attach

You must be registered for see images attach

We painted 2 pair of the carbon door sills in Stryker Green and built our first carbon fiber X brace for the gen 5 I will post some pic tomorrow

 

[jjrho]

wayne, i need cf sill plates with orange lettering for my TA…also, do you make the window inserts in CF for the rear 'windows' ?
james R
'14 TA orange

 

[jjrho]

nvr mind.... i see it, will call u.jR

 

[diamond head]

Whats the price on the sills?

 

[Texas1]

Thanks Wayne...great product!!!

You must be registered for see images attach

You must be registered for see images attach

 

[ViperJeff]

Outstanding

 

[cubican]

Looks fantastic great work