HELP! fiberglass Viper drag body...

[BLEBYU]

I have seen a pro mod Viper drag car, and was wondering where the guy got the fiberglass body, any suggestions?

Thanks

 

[Jason-Middle Tennessee]

free post. Could not get picture to post!

 

[BS99GTS]

My brother just finished building his car and the body came from this company;
http://www.redlineracing1.com/drag_racing.asp

 

[NascarDave]

Prowler,
The Pro-Mod bodies that Billy Harper and Dennis Radcliff use are completely hand made...or so they told me. Billy Harper runs the Eastern circuit and Dennis drives the west coast circuit.

Bruce is right on with his link. The blue car was "the Iceman" I believe and is/was run by Dennis.


I hope that helps,

DN

 

[BLEBYU]

Thanks Guys! I think there was about 14 or 16 cars in stock, and the #2 guy went a 12.20 something. I was the only car in the 11s with an 11.97 @ 119 in the first round. I had went two rounds when it rained. I do not have the ets for the whole field.I wish Patel would post the run sheets for all to see. Got absolutly nothing for a 11.97 in a stock GTS, and being the #1 qualifier!!
Most of the gen 1 cars where in the High 12s and low 13s at best
unless the had sticky tires then they where in the low 12s.
The sticky tires where not supposed to count but they did!