BigCarrot
Enthusiast
How Much Are Greg Good\'s Heads?
There ya go, Greg!
There ya go, Greg!
How Much Are Greg Good's Heads?
- Thread starter BigCarrot
- Start date
PhoenixGTS
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Dang you you beat me to it by seconds! I deleted my post.
Dang you you beat me to it by seconds! I deleted my post.
Greg Good Cylinder Heads
Enthusiast
Re: How Much Are Greg Good\'s Heads?
You in need of a set of Viper heads Big Carrot? I can't do them. Our friend Trevor would strangle me if that happened.
Just kidding.
The final price depends on a lot of things, so I don't really have a set price. Larger intake seats add to the price. The factory intake seats are not really large enough for a 2.02" valve, and I prefer to put bigger ones in. Some guys don't want to spend the money though. Extra flow bench time to fine tune every last bit of flow from every port costs more. How good a set of heads ends up being is directly tied into how much time the head porter spends doing R&D work on the heads. That last 5-10 cfm is tough. Every time I find a small gain, I can incorporate it into the next set. Titanium retainers, Inconel valves, chrome silicon springs, it all adds up. I'm a custom shop, and every ticket is different. The best thing for a guy to do is call up or e-mail me with his engine combination, and what he wants the car to do, and I'll figure what needs to be done and quote it out accordingly.
Greg
You in need of a set of Viper heads Big Carrot? I can't do them. Our friend Trevor would strangle me if that happened.
Just kidding.The final price depends on a lot of things, so I don't really have a set price. Larger intake seats add to the price. The factory intake seats are not really large enough for a 2.02" valve, and I prefer to put bigger ones in. Some guys don't want to spend the money though. Extra flow bench time to fine tune every last bit of flow from every port costs more. How good a set of heads ends up being is directly tied into how much time the head porter spends doing R&D work on the heads. That last 5-10 cfm is tough. Every time I find a small gain, I can incorporate it into the next set. Titanium retainers, Inconel valves, chrome silicon springs, it all adds up. I'm a custom shop, and every ticket is different. The best thing for a guy to do is call up or e-mail me with his engine combination, and what he wants the car to do, and I'll figure what needs to be done and quote it out accordingly.
Greg
ROCKET62
Has Left the Room!
Re: How Much Are Greg Good\'s Heads?
OK - so how about a range?
OK - so how about a range?
PhoenixGTS
Enthusiast
Re: How Much Are Greg Good\'s Heads?
It is pointless. It is obvious he's not going to give up the info. Sounds like the old "how much does it cost" question answered by the proverbial "how much do you have to spend" answer.
Greg Good Cylinder Heads
Enthusiast
Re: How Much Are Greg Good\'s Heads?
You guys want a range? Ok. 2" stainless intake valves on stock seats, 1.600" stainless exhausts, Fully ported for 305 cfm intake and 225 cfm exhaust, milled to your chamber spec, bronze guides, assembled with endurance springs, steel retainers, heat treated spring locators, and locks, $3400 exchange.
Add 2.02's on big seats, more port work to get into the 315-320 range, chrome silicon springs $3700 exchange.
Titanium retainers, add $100.
You guys want a range? Ok. 2" stainless intake valves on stock seats, 1.600" stainless exhausts, Fully ported for 305 cfm intake and 225 cfm exhaust, milled to your chamber spec, bronze guides, assembled with endurance springs, steel retainers, heat treated spring locators, and locks, $3400 exchange.
Add 2.02's on big seats, more port work to get into the 315-320 range, chrome silicon springs $3700 exchange.
Titanium retainers, add $100.
99 R/T 10
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Hey Greg,
Yours is the best, they are worth every penny.
Mike
Hey Greg,
Yours is the best, they are worth every penny.
Mike
PhoenixGTS
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Thanks Greg. I'd rather spend that money on your heads than put it toward a supercharger. Thanks for answering. Now I just have to find that new, higher-paying job. Hopefully you won't get all busy and raise the prices before then.
Mr. Good, since you are giving up the 411, do you need the intake manifold as well as the heads so you can match the ports? Or do the overall cross section of the entry stay the same size?
Thanks Greg. I'd rather spend that money on your heads than put it toward a supercharger. Thanks for answering. Now I just have to find that new, higher-paying job. Hopefully you won't get all busy and raise the prices before then.
Mr. Good, since you are giving up the 411, do you need the intake manifold as well as the heads so you can match the ports? Or do the overall cross section of the entry stay the same size?
Joseph Dell
Enthusiast
Re: How Much Are Greg Good\'s Heads?
I gained over 100rwhp with not just a head port, but a minor head _update_! He took what was already done (a decent stage two port job done by someone else) and turned it into a powerhouse port job!
Well worth every penny. And since it was an update, it wasn't as much labor...
JD
I gained over 100rwhp with not just a head port, but a minor head _update_! He took what was already done (a decent stage two port job done by someone else) and turned it into a powerhouse port job!
Well worth every penny. And since it was an update, it wasn't as much labor...
JD
Greg Good Cylinder Heads
Enthusiast
Re: How Much Are Greg Good\'s Heads?
That's right Joe, updates cost less because the head is already in a roughed in state. Less work, less money.
I like your sig, it's getting better all the time. Can't wait to see a "9" for the e.t.
That's right Joe, updates cost less because the head is already in a roughed in state. Less work, less money.
I like your sig, it's getting better all the time. Can't wait to see a "9" for the e.t.
Greg Good Cylinder Heads
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Yep, it's advised to port the intake. I don't get really carried away with the intake because the bang for the buck just isn't there. I open for big throttle bodies, port match, and go in as far as my grinding burrs allow to widen and polish the runners ($450). I've done a couple of manifolds where I cut the plenum open, ported the runners completely, welded it all back up and didn't see much from it on a 550'ish rear wheel motor. If you're looking for every hundreth of a second, or have a big stroker engine, and don't mind spending mucho dinero for a small gain, it's alright.
Yep, it's advised to port the intake. I don't get really carried away with the intake because the bang for the buck just isn't there. I open for big throttle bodies, port match, and go in as far as my grinding burrs allow to widen and polish the runners ($450). I've done a couple of manifolds where I cut the plenum open, ported the runners completely, welded it all back up and didn't see much from it on a 550'ish rear wheel motor. If you're looking for every hundreth of a second, or have a big stroker engine, and don't mind spending mucho dinero for a small gain, it's alright.
Re: How Much Are Greg Good\'s Heads?
Lol....
Guess who I called yesterday to have my heads done?
Greg...the heads should be there by Monday like we spoke about. I will call you to confirm.
All I have heard are good...I mean great things about these heads.
Lol....
Guess who I called yesterday to have my heads done?
Greg...the heads should be there by Monday like we spoke about. I will call you to confirm.All I have heard are good...I mean great things about these heads.
BigCarrot
Enthusiast
Re: How Much Are Greg Good\'s Heads?
HA!! You know Trevor, I guess? Nahhh, he'll be alright! I hear good things about your heads! (pun intended) I'm not ready just yet, but I will be sometime soon. Looking for another car right now.
You in need of a set of Viper heads Big Carrot? I can't do them. Our friend Trevor would strangle me if that happened.
HA!! You know Trevor, I guess? Nahhh, he'll be alright! I hear good things about your heads! (pun intended) I'm not ready just yet, but I will be sometime soon. Looking for another car right now.
ViperRay
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Greg,
Woodhouse is putting the heads you did for me back on my car as I write this post.
Can't wait to get the car on the dyno when finished!
I hope it gets properly tuned so I can make the most of your fine work....that's a variable YOU can't control unfortunately.
Thanks for the great turn around time also.
Ray
Greg,
Woodhouse is putting the heads you did for me back on my car as I write this post.
Can't wait to get the car on the dyno when finished!
I hope it gets properly tuned so I can make the most of your fine work....that's a variable YOU can't control unfortunately.
Thanks for the great turn around time also.
Ray
Vic
VCA Venom Member
- Joined
- Nov 12, 2000
- Posts
- 6,765
- Reaction score
- 1
Re: How Much Are Greg Good\'s Heads?
Go down to your local bank with the .38 blue steel and open up a line of credit.
Can you get 100HP from just heads? Wouldn't you have to clean up every bottle neck in the breathing? ie, exhaust, airbox, etc.
Go down to your local bank with the .38 blue steel and open up a line of credit.
Can you get 100HP from just heads? Wouldn't you have to clean up every bottle neck in the breathing? ie, exhaust, airbox, etc.
ViperRay
Enthusiast
Re: How Much Are Greg Good\'s Heads?
"Can you get 100 HP from just heads?"
JD has a forced induction system.
"Can you get 100 HP from just heads?"
JD has a forced induction system.
Joseph Dell
Enthusiast
Re: How Much Are Greg Good\'s Heads?
But JD did get over 100hp from just heads. 115, to be precise.
JD
But JD did get over 100hp from just heads. 115, to be precise.
JD
Vic
VCA Venom Member
- Joined
- Nov 12, 2000
- Posts
- 6,765
- Reaction score
- 1
Re: How Much Are Greg Good\'s Heads?
JD, you must mean on an engine that was already under boost.
Nice munbers ya got there....
JD, you must mean on an engine that was already under boost.
Nice munbers ya got there....
Greg Good Cylinder Heads
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Ray, did you get a chance to look at the heads before the install?
That's the lovely thing about boost Joseph, cfm gains are worth a good bit more HP on those engines. It'll surprise you. I was amazed at what your car did.
Ray, did you get a chance to look at the heads before the install?
That's the lovely thing about boost Joseph, cfm gains are worth a good bit more HP on those engines. It'll surprise you. I was amazed at what your car did.
Re: How Much Are Greg Good\'s Heads?
wassup with the yellow side sills JD?
Greg, if and when my heads come off the car I will certainly have you touch them up a little. The big bozs are leaving me behind at the moment and I need every little bit of help I can get.
Good to see you again
John
wassup with the yellow side sills JD?
Greg, if and when my heads come off the car I will certainly have you touch them up a little. The big bozs are leaving me behind at the moment and I need every little bit of help I can get.
Good to see you again
John
Gerald
Enthusiast
Re: How Much Are Greg Good\'s Heads?
I JUST got a pair on my car and can't wait to tune it. I've heard Greg gives Good Head(s).. We'll see.
I've got the the GG Heads, larger intercooler, 3x bigger injectors, etc
Before I was just pushing 800 at the rears. Can't wait to see what it can be tuned to.
Greg, nice to meet you at the v10 Nats!
Gerald
I JUST got a pair on my car and can't wait to tune it. I've heard Greg gives Good Head(s).. We'll see.
I've got the the GG Heads, larger intercooler, 3x bigger injectors, etc
Before I was just pushing 800 at the rears. Can't wait to see what it can be tuned to.
Greg, nice to meet you at the v10 Nats!
Gerald
PRVT JET
Viper Owner
Re: How Much Are Greg Good\'s Heads?
Greg, how much for just the port job with out buying the valves? I would like the bigger seats and the whole works, but we will be doing the work ourselves.
Greg, how much for just the port job with out buying the valves? I would like the bigger seats and the whole works, but we will be doing the work ourselves.
Re: How Much Are Greg Good\'s Heads?
Yeah leave it to gerbil boy to turn a thread into his ****** **********. You're just sick!
I JUST got a pair on my car and can't wait to tune it. I've head Greg gives Good Head(s).. We'll see.
I've got the the GG Heads, larger intercooler, 3x bigger injectors, etc
Before I was just pushing 800 at the rears. Can't wait to see what it can be tuned to.
Greg, nice to meet you at the v10 Nats!
Gerald
Yeah leave it to gerbil boy to turn a thread into his ****** **********. You're just sick!
Gerald
Enthusiast
Re: How Much Are Greg Good\'s Heads?
hmmmm, Adam, I was hoping you'd come down, I had a suprise for you..!
hmmmm, Adam, I was hoping you'd come down, I had a suprise for you..!
AJT
Enthusiast
Re: How Much Are Greg Good\'s Heads?
And he is only 3 miles away from me.
And he is only 3 miles away from me.
ViperRay
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Greg,
I couldn't get to Woodhouse to see the heads in person (they're a few hours away) but they're taking digital photos for me.
At the moment they're doing their own flow testing prior to installing them...it's good they're evaluating them so they'll know how much better they are than the one's they're currently using.
They are going to tune it first using the Unichip computer and then with the VEC2 for comparison (they want to evaluate the VEC2 to see if they like it better).
I'm all for whichever works best!
I'll let you know how it progresses.
Ray
Greg,
I couldn't get to Woodhouse to see the heads in person (they're a few hours away) but they're taking digital photos for me.
At the moment they're doing their own flow testing prior to installing them...it's good they're evaluating them so they'll know how much better they are than the one's they're currently using.
They are going to tune it first using the Unichip computer and then with the VEC2 for comparison (they want to evaluate the VEC2 to see if they like it better).
I'm all for whichever works best!
I'll let you know how it progresses.
Ray
rgavitt2002
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Concerning Greg's heads, I would prefer not to exchange my heads but have my heads worked on and modified. I want to keep all my numbers matching. Is no one else concerned about that? Thanks,RG
Concerning Greg's heads, I would prefer not to exchange my heads but have my heads worked on and modified. I want to keep all my numbers matching. Is no one else concerned about that? Thanks,RG
Dr Roof
Enthusiast
Re: How Much Are Greg Good\'s Heads?
Greg Good has the best heads in the Viper World as far as Im concerned.
My blower car has had a couple sets traded and upgraded and they work great!!! not to mention the power level increase.
He is also Very Honest and trust worthy! very Important! you will get what he tells you and theree will be no surprises.
Greg Good has the best heads in the Viper World as far as Im concerned.
My blower car has had a couple sets traded and upgraded and they work great!!! not to mention the power level increase.
He is also Very Honest and trust worthy! very Important! you will get what he tells you and theree will be no surprises.
ViperRay
Enthusiast
Re: How Much Are Greg Good\'s Heads?
I had him work on my heads...two weeks turn around time.
I had him work on my heads...two weeks turn around time.
AJT
Enthusiast
Re: How Much Are Greg Good\'s Heads?
I do not believe the heads are numbered, just the block.
Andy
I do not believe the heads are numbered, just the block.
Andy
