Identifying Striker Heads

[DrumrBoy]

Are there any outwardly-visible differences between Gen 2 heads and Striker heads? What I mean is can you tell a Striker head while its on the car and under a valve cover. I've never seen one and don't know whether this is possible. Anyone with Strikers know?

 

[Viperless]

I have a few pics that may help. If you can see the top of the intake ports on the stock head, they have a lot of casting flash. The Striker head does not. Also look for a stamped serial number and the Striker logo. The deck surface of the head is much thicker than the stocker.

Stock head:

You must be registered for see images attach

Striker head:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[DrumrBoy]

Thanks Viperless...the last one is a dead giveaway!

 

[Viperless]

Thanks Viperless...the last one is a dead giveaway!

Ya but it's on the intake port side. Kind of hard to see under the intake manifold.

 

[Chuck 98 RT/10]

So does anyone know if that place out in Nevada is gonna produce Strikers for a GenII? Exotic Engine Development I think was the name.

 

[DrumrBoy]

I can ask Kevin at Exotic and report back what he says.....