Need to find the weatherstripping that goes behind the windows....

[Vital Velocity]

The piece that runs up and down at the end of the window ( at the back of the window). Anyone have a part number or a place to pick one up for each side?

 

[dave6666]

What year/model?

 

[Vital Velocity]

96 GTS .

 

[2001 GTS]

Reminds me i need to glue mine...starting to fall off!!

 

[dave6666]

Are you talking about the part attached to the stanchion? If so, I think that's a one piece assembly for like $450. Are yours missing, toasted, falling off?

 

[Vital Velocity]

You must be registered for see images attach

That piece

 

[Dom426h]

Yes, You have to order the entire rail assembly to get the stupid plastic insert
I wandered why my window was rattling so i stuck a flashlight in there to see my front rail insert missing. Usually they just fall out and lay on the bottom so you can fish em out and re-glue in. Mine must have come up with the window and the previous owner chucked it.

I took some door edge guard and glued it in with black silicon...
5bucks DIY vs $***

similar to this, but the wider type that only comes in 6" sections.

You must be registered for see images

 

[Dom426h]

another option would be to pull one off a salvaged viper.

 

[Viper Wizard]

Are you talking about the part attached to the stanchion? If so, I think that's a one piece assembly for like $450. Are yours missing, toasted, falling off?

Dave your close on the price [not], Left outer stanchion MSRP $589.75!!
Less 20% VCA discont 914-763-3136

 

[Detlef]

Damn, and I thought the water pump price was expensive. At least dar be some metal in there!

 

[ggc]

Is there some reason why some enterprising viper owner can't have a replacement weatherstripping made for this? Hopefully correcting the original problem that causes the weatherstripping to come apart. Just a thought.

 

[sniper1]

If you think thats bad, I just bought a set of 09' six spoke wheels w/o the center caps and ended up buying the center caps from a local dealer at cost. ($375) for 4 silver dollar sized aluminum pieces to cover that little hole in the middle . You do the math

I re-glued my rubber window guards and keep a eye on em. I used really sticky silicon in black to match the stancion and it seems to be working for me

 

[sirhc76]

Search stanchion I glued mine back on two years ago and have had no problems since. They were both missing and both found inside the door under the window on my 98.

Chris

 

[RobZilla]

+1 = try the DIY dirt cheap fix before you drop 600 bones on a piece of rubber.

 

[Red Shift]

Checking in that this is a common problem. I'm missing the rubber piece on my passenger door. I'll check inside the door to see if I have a little treat! I checked into a replacement part and remember finding the part for $150-$350, probably used.

 

[dave6666]

Dave your close on the price [not], Left outer stanchion MSRP $589.75!!
Less 20% VCA discont 914-763-3136

$589.75 - 20% = $471.80.

Dave's guess - $450.00.

Percent error - 4.6%

I think I just earned my white hood vents!