ncshooter426
Enthusiast
- Joined
- Jun 24, 2015
- Posts
- 1
- Reaction score
- 0
I'm nearly done putting my 99 back together after an unfortunate/unintentional offroading adventure (note: Offroading capabilities of the Gen2 are somewhat limited 
)
Only bits left to replace are the oil cooler (it's completely pancaked) and the radiator core support. The core *could* be fixed, as the damage is on the drivers side piece of it...but I'd rather just flat out replace it. Now, the cooler: 400$ avg price seems absurd for an old OEM model. Does anyone have a recomendation for a bigger/better aftermarket unit? I haven't measured the originals, figured I'd ask. As for the core support - recommended vendor? I came up with PN: 4709352AC for it, assuming that is correct.
While we're on the topic of bits... is there a decent fan/fan shroud replacement out there? I picked up a new aftermarket radiator (cheap insurance) but haven't looked into fans.
Many thanks
NCS
)Only bits left to replace are the oil cooler (it's completely pancaked) and the radiator core support. The core *could* be fixed, as the damage is on the drivers side piece of it...but I'd rather just flat out replace it. Now, the cooler: 400$ avg price seems absurd for an old OEM model. Does anyone have a recomendation for a bigger/better aftermarket unit? I haven't measured the originals, figured I'd ask. As for the core support - recommended vendor? I came up with PN: 4709352AC for it, assuming that is correct.
While we're on the topic of bits... is there a decent fan/fan shroud replacement out there? I picked up a new aftermarket radiator (cheap insurance) but haven't looked into fans.
Many thanks
NCS
