Powder Coating rear calipers?

[RalphieViper]

Anyone with a Stoptech front brake kit powdercoat the rear calipers to match the front reds?

If so, where?

Thanks

 

[KepRght]

phone book, check with a hot rod shop for a local source.

there are kits you can do in your oven, not recomended.

 

[Anthony - 98 GTS]

Why didn't I think of that?

 

[Tom F&L GoR]

Anthony,
Did you get new caliper slide bolt dust boots? Where did you find them?

 

[SapphireGTS]

jay at www.propowder.com.

He is really good and REALLY cheap.

I dont know where you are located.

 

[Anthony - 98 GTS]

Anthony,
Did you get new caliper slide bolt dust boots? Where did you find them?

Hey Tom,

No, actually after I had them powder coated and tried to install them - the pistons were bad and I ended up using a different set. They did look great.

 

[RalphieViper]

Thanks KepRght,

Do I just dial 411?!

 

[RalphieViper]

I'm in NYC.

Anthony- nice job! Do i have to take out the piston and seals, or could i just send them out as is?

Ralph

 

[BADVENOM]

Ralph theres a guy in here in LI that does nothing but polishing, chroming and powder coating..does beautiful work..

 

[Anthony - 98 GTS]

I'm in NYC.

Anthony- nice job! Do i have to take out the piston and seals, or could i just send them out as is?

Ralph

I did not have any problems. Everything on your brakes are designed for high temps. Most powers are baked on in the 300-400 degree range. Talk to you powder coater and and just stay in the lower temp ranges for the minimum times.

 

[RalphieViper]

Adam,

you would happen to know this guy's name?

Ralph