I want black valve covers with red Viper lettering. I dont want to hand paint the letters. Would it be possible to powdercoat the valve covers in black, machine the powdercoat off the letters, then anodize the whole thing to make the letters red? I guess I could mask off the letters then powdercoat them red after doing the black, but this option would be easier if it could work. I just wonder if the anodizing would affect the powercoat. Thanks!
Powdercoating a section of a part then anodizing remaing exposed metal?
- Thread starter heath1225
- Start date
Hostile
Enthusiast
The Viper valve covers will not anodize wrong alloy.
Skeeter
Skeeter
intense5.5
Enthusiast
How about powdercoating them black, then sanding and painting the lettering? Maybe in candy?
Steve M
Enthusiast
There are people that can do multi-color powder coating jobs...I'll send you a PM with an idea.
Sorry, I guess as an enthusiast I can't post pix. Too bad since the GA club has officially engaged both organizations in an attempt to see which they'd recommend for the GA members. Seemed like y'all jumped the gun on dissing us. Oh well.
BlackSnake99
Enthusiast
It would appear that an enthusiast CAN post pics.....
You must be registered for see images attach
BlackSnake99
Enthusiast
They were coated then the letters were sanded down. Then clear powdercoat. I took them to several local powdercoaters who refused to mask or sand the letters (well, one company would do it for a ridiculous stack of cash) because of the complexity of the lettering and the low relief of the lettering. I finally sent them to Justin at JMB, and you see the result above. Done well and cheap.
AZTVR
Enthusiast
I saw their YouTube video advertisement. Impressive, if they deliver that kind of product & quality on a regular basis. Please post results.
_________________________________________________
Jim - 2002 GTS ACR - former owner - 8 years
Steve M
Enthusiast
Very cool...she's a good lady to work with.
WSAYERS80
Viper Owner
Check out my Link. I just Rebuilt a FE Viper. I Redid my Valve covers. Stripped, Sandblasted and Powder Coated with Red Wrinkle. I then Masked the Valve cover and Sanded the lettering to expose the Aluminum.
https://www.facebook.com/media/set/?set=a.1426481337567599.1073741831.100006172381835&type=1&l=6201c4b68f
https://www.facebook.com/media/set/?set=a.1426481337567599.1073741831.100006172381835&type=1&l=6201c4b68f
AZTVR
Enthusiast
Where did you get the powder from and what color/code ? How well did it match OEM? I have some old valve covers with terrible finish that I just use for garage art; but, I have hobbyist powder coating capability, so, I'm interested.
__________________________________________________________
Jim - 2002 GTS ACR -- sold-- ( enthusiastic custodian for 8 years )
Last edited:
WSAYERS80
Viper Owner
I will Find Out. I will upload a photo and show you the finished product. Originally they were painted. Powder Coating isn't Paint but I will find out the Brand for you. Its gonna take a few hours to do correctly so take your time.
You must be registered for see images attach
CudaChick1968
Enthusiast
WOW, no wonder my ears were burning!!!
First off, thank you all for the kind words and fantastic compliments! It's an honor to be on board and to have a chance to get to work with a few of you already. If Steve and Heath are an indication of the caliber of members around here, I can tell at the outset that it's going to be terrific and I'm going to enjoy the heck out of this place.AZTVR, thank you for checking out my Introduction Movie! I just finished it on December 22 and it's already had over 1600 views. Straight up though, there isn't much "they" around here -- it's just me and Billy, and he helps me out with some light prep, welds up jigs when I need them, and handles most of the shop maintenance; everything else is all on me. You can rest assured that everything I touch will receive the same attention to detail, careful craftsmanship and quality that you saw in the video. I was merely an enthusiast and restorer long before I was ever a business owner and if I wouldn't put my work on my own car then I'd NEVER ask you to put it on yours.
Anyway ladies and gentlemen, thanks again for the mentions and for having an opportunity to earn your business. I look forward to getting my toes wet around here, getting to know you all, and having a hand in some of these fine rides. Don't ever hesitate to hit me up if you want to go over details, have questions, or just bench race a little bit -- I love it all!!!
P.S. edit: Whoops, I forgot to tell you I've approached Member Services about offering a labor discount to ya'll but haven't had a chance to talk with anyone yet to get an arrangement formalized. If it comes through, you'll be the next to know!
Last edited:
Real_Venom
Viper Owner
I've had a couple Valve covers powder coated. If you are looking for Gen III covers I have these for sale.
You must be registered for see images attach
steve911
Enthusiast
Those are '06 covers right? The '03-'04 covers had the vent tubes in the rear so it would take some adapting to get those to work on the earlier gen 3's.
Real_Venom
Viper Owner
Yes they are 06 covers. I did not know they changed it up. Thanks for pointing that out. Wonder what the conversion would cost in parts?
CudaChick1968
Enthusiast
Sorry it took so long heath! I can't wait to see your ride now.
Thanks again for your confidence in my abilities -- I hope to work with you again.
