side window curtain removal

[propsail]

Is there a trick to this? I'm trying to remove the driver's side window curtain, and it doesn't seem to want to slide forward anymore to unsecure the front latch. I don't want to force it and I've tried pushing down while sliding but nada. Any tips? The passenger side didn't seem to be much of an issue. Thanks,
~Craig

 

[BADVENOM]

the side windows slide back and then up to unlatch..forward to latch

 

[94RT10Ohio]

Looking at mine (has not been in the car since I it), they should slide forward to come out. Back to lock in. This judging by looking at the side curtains out of the car.

I suppose it is possible you may have to apply some down pressure.

 

[propsail]

Definitely slide forward to remove for the factory curtains. I just don't want to force it. Maybe if I talk nice to it.

 

[Jeff Torrey]

You didn't forget to unscrew the bolt did you?

Other then that forward and up and out.

 

[propsail]

Definitely unscrewed. I guess I'll just have to push like a man

 

[bth1]

Sometimes I wiggle it side to side (left then right). That or I try putting some pressure on the front (down) and lift the rear side forward and up. Mine gets stuborn sometimes also.

 

[ViperJames]

These Window's ****. Only thing that ***** about our GEN 1's....I had to totally take apart my drivers window to get it off the car...the parts get bent a little, which makes for the difficulty.

 

[94RT10Ohio]

Once you take them off just leave them off

 

[obaa996]

I've noticed with mine, that it helps to push the window down (at the points where it hooks into the door) in conjunction with pushing forward. You need to finesse it.

 

[propsail]

Well, a little cringing, pushing and wiggling and it's off. I won't have to worry again (I hope). I bought the winder side curtains from Parts Rack.

Thanks for everyone's help.
~Craig