Day 2: Adam's 3 Step, Americana Paste Wax, wheel/exhaust polishing, and tire conditioning.
When we got back to the shop, we removed the plastic cover that was protecting the car from dust and got straight to work. We started off by focusing on an imperfection that was on the hood. In order for this to be taken cared of, it was going to need "Adam's 3 step process" which includes Adam's Swirl and Haze Remover (Orange), Adam's Fine Machine Polish (White) and Adam's Machine Super Wax (Black).
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Remember that scratch from that last write up?? After 2 passes with SHR, 1 pass with FMP and 1 pass with MSW, here is what we ended up with...
You must be registered for see images attach
You must be registered for see images attach
Before moving on to the next step, I noticed another small imperfection towards the rear end of the Viper that we took out using the same process...
You must be registered for see images attach
Once all of the noticeable imperfections were taken cared of, we went on to top the car off with Adam's Americana Paste Wax. While using Adam's convenient applicator pads, we layered a very thin coat of wax across the entire finish doing a small area at a time.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
After we finished with the paint on the Viper, we moved onto other exterior accessories. We started off by polishing the wheels using Adam's 2 step Metal Polish.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
We also used Adam's 2 step Metal Polish on the exhaust of the Viper...
You must be registered for see images attach
You must be registered for see images attach
Once the wheels and exhaust were polished up, we went on to conditioning the tires using Adam's Super VRT Tire & Trim Dressing.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
After a few hours of work and a whole lot of shining, we pulled it outside to take a look at what we were able to accomplish so far. Fortunately for us, it wasn't raining like it was yesterday so we were able to snap a "teaser" picture of the exterior for you guys...
You must be registered for see images attach
Pictures of the final product will be posted the weekend of June 4th/5th. Stay tuned for the 3rd and final write up coming ASAP!