Well boys is it time for a head gasket job yet? scans..

AAKVIPER

Enthusiast
Joined
May 9, 2007
Posts
252
Reaction score
1
Location
Princeton area ..Central NJ
I own a 1994 RT 10 with 8,000 miles on the OD. I have been reading some posts regarding head gaskets. Inevitably it made me look at what I had at the bottom area of the V 10. Well no oil loss and no coolant mixed oil..No coolent smell, loss or puddles. Just some stains seen in the pictures below.

Is it time or the 2.5K head gasket job, or damage might happen at this stage in the game?

Advice would be appreciated, Arthur


You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach
 

V10 PWRD

Viper Owner
Joined
Dec 4, 2007
Posts
234
Reaction score
0
Location
Culpeper,VA
This looks just like the stains on my 94. It is leaking antifreeze or did at one time or another. Your's appear to have started to seep. I replaced my head gaskets about 2 months ago with a great crew of Viper guys. PM me a name and a number if you want to and I'll give you the rundown on what you need and where to get the stuff.
Greg
 

JonB

Legacy\Supporting Vendor
Supporting Vendor
Joined
Dec 8, 1997
Posts
10,325
Reaction score
45
Location
Columbia River Gorge
Weeping And Seeping..... not IF but When they will go

Usually not catastrophic, but you might start checking with Sponsor-Vendors for the improved gaskets
 

plumcrazy

Enthusiast
Joined
Jun 9, 2003
Posts
16,243
Reaction score
7
Location
ALL OVER
i have never spoke to or had work dopne by him but chris barone of Collision Viper Specialist in West Orange has been around a while and i believe is a site sponsor. might wanna give him a call or chuck tator at 914-763-3136
 

RedEnuf93

Enthusiast
Joined
Feb 14, 2002
Posts
2,591
Reaction score
2
Location
Lancaster, PA
You're close to Tator. Give Chuck a call, he changed my head gaskets at 25K. You cannot find a better guy for this job.
Did I mention Chuck has a Red GEN 1...:2tu:
 

ViperTony

Enthusiast
Joined
Apr 3, 2006
Posts
7,554
Reaction score
0
You're close to Tator. Give Chuck a call, he changed my head gaskets at 25K. You cannot find a better guy for this job.
Did I mention Chuck has a Red GEN 1...:2tu:

Absolutely Chuck has done more than his fair share of head gaskets. At the very least, give him a call at 914-763-3136.
 

jdeft1

Enthusiast
Joined
Jul 9, 2008
Posts
2,401
Reaction score
1
Location
Metropolis
If you plan to DIY I can tell you the job is obvious and straight-forward (and that 2.5k number goes down to around 600 bux :2tu: ).

Yes, you should do it sooner rather than later. You'll enjoy driving it even more knowing it's done and back to 100%.
 

Latest posts

Forum statistics

Threads
153,645
Posts
1,685,213
Members
18,221
Latest member
tractor1996
Top