West Coast Viper VS DC Performance for paxton install

[SD SRT Coupe]

Which shop should I go with? It looks like DC is about $500-$700 more expensive for the labor. Anyone have any advice/experiences?

 

[Vipermann]

I've spoken with both of these shops and they both seem VERY knowledgable about SRT Vipers -- probably can't go wrong with either, but I like the idea of DC's custom PCM flash vs. a piggy-back tuning job.

 

[VPRVENM97]

This might help with your decision. 60 Paxton installs with no problems

 

[ILLSMOQ]

I've spoken with both of these shops and they both seem VERY knowledgable about SRT Vipers -- probably can't go wrong with either, but I like the idea of DC's custom PCM flash vs. a piggy-back tuning job.

Pretty sure they still use the piggy back in addition to their pcm flash.

 

[Viper Wizard]

I would go with DC Performance!

 

[MikeR]

I have only dealt with DC performance for a PCM and some brief questions. Met the guys at VOI9. Very nice guys and they know Vipers. Very helpful. If I was going to do a Paxton, they would be who Id call. Honestly I dont know anything of the other shop,so I cant give you any feedback.

 

[Finally got it !]

Which shop should I go with? It looks like DC is about $500-$700 more expensive for the labor. Anyone have any advice/experiences?

Don't ever put price on Quality. I would rather pay more now than..........

 

[SD SRT Coupe]

I've spoken with both of these shops and they both seem VERY knowledgable about SRT Vipers -- probably can't go wrong with either, but I like the idea of DC's custom PCM flash vs. a piggy-back tuning job.

West Coast can do the pcm flash tune too.

 

[HARDVIPER]

John @ WCV installed mine and everything went pretty good But I gotta go with the DC Boys, They really take care of their clients and there prices are better!

 

[plumcrazy]

if tator says it, its gotta be true...

 

[Dave T (BADVENM)]

I've had great success with Dan regarding upgrades/minor issues with my Paxton SRT Ram. He didnt install the Paxton but did provide excellent service over the phone in diagnosing some "issues" I was having.

I know of at least a handful of SRT Ram guys who have had Dan build their rigs. Although not directly related to the Viper Dan is the only one that I know of who has spent countless hours of research and development on the dyno finding ways to improve the out of the box Paxton package. Just his blower flash alone improved my 1/4 mile time a full second.

You wont regret going to Dan and the guys for your Paxton upgrade!!

 

[GTS-R 001]

Here is a dyno graph of my PAxton Unit as installed by Dan @ DC, this pull is a heat soaked pull, the ones where the unit was "cold" were well over 800RWHP, this one is a paultry 768RWHP and tonnes of TQ for a paxton unit

 

[Casey]

DC

 

[Viper X]

SD SRT Coupe,

You can PM me at: [email protected].

Check our so cal website at www.socalviper.org.

You can call at 949-600-7244

Dan

 

[NoRice]

I have only heard good things about DC, can't say that for the other shop.

 

[C O D Y]

Dan at DC is a top notch tuner.

 

[Racer Robbie]

I would go with Dan at D C Performance. There has never been a time that I have called Dan that he has not dropped what he was doing and given me his full attention for as long as I needed. The same holds true for Chuck Tator at Tator's Dodge on the East Coast.

 

[HARDVIPER]

John @ WCV installed mine and everything went pretty good But I gotta go with the DC Boys, They really take care of their clients and there prices are better!

Sorry buy I'm not familiar with DC I meant AC Performance!
Contact at: [email protected]

 

[Hans Christian]

I have only dealt with DC but fantastic service!!!!!

 

[Greg-TT]

I had nothing but great experiences from both shops. When WCV was in temecula location (4yrs ago?) worked on my previous GTS (venom650) he showed what the customer service is all about by picking up the car and delivering to my house (about 50 mi each way) in the enclosed trailer not to mention the great result. DC on the other hand worked on my current SRT10 and all I can say is WOW~ they are the viper expert. I'm also thinking about paxton & motons for my SRT10 this summer and I will go with DC simply because DC knows my car and had more experience with the paxton. But I tell ya, you can't go wrong with either one of them.

Gregory

 

[Bill Pemberton Woodhouse]

Both good guys, but just keep in mind that Dan was there with the boys from Paxton assisting with their R & D. We have had over 85 installs now and got the initial advice from Mr. Cragin and folks at DC Performance.

Have heard nothing but good things about both places from out customers in California.

Respectfully,
Bill Pemberton
Woodhouse Viper