2004 Z06 Z16 Details:
#1351 of 2025 built
18,*** miles
Perfect condition
523rwhp / 486ftlbs all motor
3100 lbs
Modifications:
Engine
LS402
Block- GM LS2
Crankshaft- Lunati King Crank 4"
Rods- Eagle 6.125
Piston- Wiseco -8cc Reverse Dome
Rings- Wiseco 4005 HF
Main Bearings- Clevite 77
Rod Bearings- Clevite 77
Camshaft- Vengeance Racing Vindicator 240/244 .605/.596 112 LSA
Cam Bearing- Durabond
Timing Set- IWIS Severe Duty
Oil Pump- Melling Hi Volume
Lifters- Comp 850-16
Push Rods- TFS 7.500
Rockers- Yella Terra 1.7
Heads- Trick Flow CNC 215cc
Intake Valves- 2.04
Exhaust Valves- 1.57
Springs- TFS/TEA .650 Dual Spring
Combustion Chambers- 59cc
ARP Head Studs
Compression- 11.35:1
Injectors- 42lb
Induction:
Intake- FAST 102
Fuel Rails - FAST
Throttle Body- Nick Williams Billet 96mm
Air Intake- Black Wing
Air Intake- Breathless Performance Air Bridge
Exhaust:
Kooks 1 7/8 Stainless Longtube Headers
Kooks High Flow Catted X pipe
Corsa Extreme 4” Stainless Catback Exhaust
Abear Custom Valve Covers- Fully Polished
FAST Fuel Rails
Suspension
Pfadt Race Engineering Coil Overs
Pfadt Race Engineering Street Sway Bars
Pfadt Race Engineering Transmission Mount
Drivetrain
Textrailla OZ700 clutch
GM Slave Cylinder
MGW Shifter with C6 Knob and Boot
RPM Transmissions Stage II Differential w/3.73
Brakes:
BEAR Cross Drilled and Slotted Rotors
Carbotech Brake Pads
Carbon Fiber Brake Ducts
Interior:
Corbeau Race Seats and Seat Post
Auto Meter Dual Pod with Sport Comp 2 Gauges
Raptor Shift Light
Everything above was professionally installed at Vengeance Racing. I can provide all original invoices totalling $35,000
Wheels/Tires- $9452.00 less than 1500 miles ago!!
Forgeline Wheels and Nitto tires
SP3P 19x10 front
SP3P 20x11.5 rear
Polished Center with Powder Clear Coat
Polished Lip
Powder Coated Inner Barrel
Titanium Hardware
Billet Polished Center Caps with Powder Clear and Paint Matched Ring
Nitto Invo Tires
275/30-19 Front
305/25-20 Rear
#1351 of 2025 built
18,*** miles
Perfect condition
523rwhp / 486ftlbs all motor
3100 lbs
Modifications:
Engine
LS402
Block- GM LS2
Crankshaft- Lunati King Crank 4"
Rods- Eagle 6.125
Piston- Wiseco -8cc Reverse Dome
Rings- Wiseco 4005 HF
Main Bearings- Clevite 77
Rod Bearings- Clevite 77
Camshaft- Vengeance Racing Vindicator 240/244 .605/.596 112 LSA
Cam Bearing- Durabond
Timing Set- IWIS Severe Duty
Oil Pump- Melling Hi Volume
Lifters- Comp 850-16
Push Rods- TFS 7.500
Rockers- Yella Terra 1.7
Heads- Trick Flow CNC 215cc
Intake Valves- 2.04
Exhaust Valves- 1.57
Springs- TFS/TEA .650 Dual Spring
Combustion Chambers- 59cc
ARP Head Studs
Compression- 11.35:1
Injectors- 42lb
Induction:
Intake- FAST 102
Fuel Rails - FAST
Throttle Body- Nick Williams Billet 96mm
Air Intake- Black Wing
Air Intake- Breathless Performance Air Bridge
Exhaust:
Kooks 1 7/8 Stainless Longtube Headers
Kooks High Flow Catted X pipe
Corsa Extreme 4” Stainless Catback Exhaust
Abear Custom Valve Covers- Fully Polished
FAST Fuel Rails
Suspension
Pfadt Race Engineering Coil Overs
Pfadt Race Engineering Street Sway Bars
Pfadt Race Engineering Transmission Mount
Drivetrain
Textrailla OZ700 clutch
GM Slave Cylinder
MGW Shifter with C6 Knob and Boot
RPM Transmissions Stage II Differential w/3.73
Brakes:
BEAR Cross Drilled and Slotted Rotors
Carbotech Brake Pads
Carbon Fiber Brake Ducts
Interior:
Corbeau Race Seats and Seat Post
Auto Meter Dual Pod with Sport Comp 2 Gauges
Raptor Shift Light
Everything above was professionally installed at Vengeance Racing. I can provide all original invoices totalling $35,000
Wheels/Tires- $9452.00 less than 1500 miles ago!!
Forgeline Wheels and Nitto tires
SP3P 19x10 front
SP3P 20x11.5 rear
Polished Center with Powder Clear Coat
Polished Lip
Powder Coated Inner Barrel
Titanium Hardware
Billet Polished Center Caps with Powder Clear and Paint Matched Ring
Nitto Invo Tires
275/30-19 Front
305/25-20 Rear