Viper Specialty
- Posts
- 5,762
- Reaction score
- 79
Latest activity Postings About
-
-
Viper Specialty replied to the thread stand alone wiring system.Why would you want those problems? AEM controllers are well-known to be some of the most problematic of the V10 based market offerings... -
Viper Specialty replied to the thread (1) set of take-off Gen-3/4 Pro-Plus 4QD Oil Lines available....What, did the market die? These would have been gone in 48 seconds six months ago.
-
Viper Specialty reacted to Old School's post in the thread Reverse Lights Not Coming on (2006 coupe) with
Like.
Unplug the switch on the trans, with the ignition on and in reverse (not running), 12v should be present on one of contacts in the... -
Viper Specialty replied to the thread (1) set of take-off Gen-3/4 Pro-Plus 4QD Oil Lines available....Also have ONE set of Gen-4 Stainless braided lines, standard version, 449.00, New. This is the last set of these that will be available...
-
-
Viper Specialty replied to the thread 2003-2006 Dodge Viper SRT-10 Twin Turbo System.Should be back up in NY over the holidays if anyone is interested.
-
Viper Specialty posted the thread (1) set of take-off Gen-3/4 Pro-Plus 4QD Oil Lines available... in SRT10 and SRT10 Coupe Discussions.As the post says... 1 set, take-off and discounted. Pro-Plus line type. 4-Quick Disconnect version, [all 4 ends]. Bare Kevlar/Teflon...
-
-
Viper Specialty replied to the thread Volt gauge reading.I am leaning towards a alternator diode on this one. Its being controlled, but it cannot supply. Also possible battery temp sensor...
-
Viper Specialty replied to the thread My Dealership No Longer Servicing Gen 5.Edit: jesussssss. This thread is a decade friggen old What exactly do you need? While I am in no way looking to dive back into general...
-
Viper Specialty replied to the thread Engine Oil leak-SW Florida.Depending on what it is, I can take on smaller jobs over here now. Not yet set up for larger ones. Exhaust pipe is likely valve cover...
-
Viper Specialty replied to the thread 2004 Dodge Viper Gen 3 - lost oil.Easy answer is clean it up, fill with oil, run it, and watch. Everything else is just guessing.
-
Viper Specialty replied to the thread Pcm diagram for 1996 Viper Gts.Email me what is going on, and what you need @ [email protected]
-
Viper Specialty reacted to Steve-Indy's post in the thread Pcm diagram for 1996 Viper Gts with Like.
Andrew's, your best bet would be to contact Dan Lesser at Viper Specialty Performance in Florida. 716-912-5336 Good luck.
-
Viper Specialty replied to the thread Hard start when hot.While I have seen it on Gen-2+, its not nearly as prevalent or obvious as with Gen-1 cars. What you describe is far more likely a fuel...
-
He does.
-
Viper Specialty replied to the thread Hard start when hot.Check fuel pressure drop-off and boil-out with a gauge. If it tests OK, what you describe is also a symptom of an impending PCM failure...
-
-
Loading…
-
Loading…
![ProPlus [4].jpg](/vca/data/attachments/141/141227-d1f2231732a36d835a7a444c578ea697.jpg)
