Search results
-
Am I spinning my wheels
No roadster coming from the factory. -
best shocks for those with Eibach's and lowering caps
PM sent...- mjorgensen Woodhouse
- Post #6
- Forum: RT/10 and GTS Discussions
-
Asking Billy P to share pictures of standard ACR
Bill would probably post pictures, if he had them and if he knew how, lol :-) I'll see if he has anything that I can help post, a picture is worth a 1000 words so Bill would rather spend his time talking with you all and I'll get some pictures. And yes Bill is truly the FOM ;-) -
New exhaust Questions
The Belanger mufflers are smaller in diameter so it can't hurt. the Corsa is only slightly smaller than factory. -
New exhaust Questions
The stock exhaust is very efficient so if you are changing it out do it for sound characteristics only. The GenV does not have the cool tips of the other generations so you are paying only for the sound. The Corsa has a crisp racecar note at WOT and is fairly tame at idle. The Belanger has a... -
Boomerang Mud Flaps for Gen 5
You can just call me, at 402-677-2935, or email [email protected] with your information, I will take care of the rest. Thank you, -
where can I buy wood house motor/tranny mounts????
I have the motor and trans mounts in stock- mjorgensen Woodhouse
- Post #8
- Forum: SRT10 and SRT10 Coupe Discussions
-
Parts are now available for door handle recall
Parts depot are showing kits available! your dealer will need to order this part number CBAFR141AA, then the second part is the codes for the car color which also seem to be well stocked. -
Parts are now available for door handle recall
The part number needing ordered for the recall is CBAFR141AA It does not show that it is available in the ordering system as of yet. You can order individual door switches, but not the recall package which is needed to cross the recall off the list. SSD Order ETA: Not Applicable... -
losing fuel pressure
Not as far as leak down- mjorgensen Woodhouse
- Post #9
- Forum: SRT10 and SRT10 Coupe Discussions
-
losing fuel pressure
Pull plugs and look for wetness and possibly use a scope to see if there is any fuel pooled in the cylinder.- mjorgensen Woodhouse
- Post #7
- Forum: SRT10 and SRT10 Coupe Discussions
-
losing fuel pressure
I leaking injector could also do this and account for poor initial running.- mjorgensen Woodhouse
- Post #5
- Forum: SRT10 and SRT10 Coupe Discussions
-
Poor Quality control issue
Was there a repair done to the nose prior to delivery? -
Blew 2nd gear...need advice
No tune needed- mjorgensen Woodhouse
- Post #22
- Forum: SRT10 and SRT10 Coupe Discussions
-
Great experience with Tom Sessions
Tom is a great guy and resource for all things Viper ;-) Nice work Tom.- mjorgensen Woodhouse
- Post #2
- Forum: General Viper Discussion
-
Wire schematic
Send me an email and I will send them to you, [email protected]- mjorgensen Woodhouse
- Post #2
- Forum: RT/10 and GTS Discussions
-
Cat Deletes w/o Throwing Codes or Issues?
the Arrow PCM will not throw a CEL, but will not pass a plug in test because the rear O2's are non functioning. -
Transmission issues - wouldn't go into any gear!
Take it back when it is acting up, don't shut it off then take them for a ride and show them yourself when it is happening, sometimes when you leave it and it cools things will not act up. -
Short throw advice needed
MGW does not make Viper shift knobs anymore, but the MGW shifter (the best shifter there is) itself is available still through me.- mjorgensen Woodhouse
- Post #4
- Forum: SRT10 and SRT10 Coupe Discussions
-
Exhaust upgrade advice needed
Not as simple as cutting anything out you will need to buy the exhaust as a complete system yes.- mjorgensen Woodhouse
- Post #10
- Forum: SRT10 and SRT10 Coupe Discussions
-
Cat Deletes w/o Throwing Codes or Issues?
The Arrow PCM will not pass a plug in test that is a known. If you use the HPT option you cannot go back to a stock calibration without the dealer knowing, once the HPT is flashed into the stock PCM the part number that the Chrysler software looks for is gone for good and the dealer equipment no... -
Exhaust upgrade advice needed
Full Belanger with HF cats will get you what you are asking for although there is not a lot of power added if you have a Gen3 car.- mjorgensen Woodhouse
- Post #6
- Forum: SRT10 and SRT10 Coupe Discussions
-
Look under your hood PLEASE...
Gotcha, totally missed that Jack -
Look under your hood PLEASE...
The design was changed from yours Jack, the grills were breaking tabs off when installing and they put reliefs there to lessen the pressure when they were installed to prevent it, the newer hoods all have a little relief there. -
2016 ACR ordering
Woodhouse sells at MSRP never above!
