Search results

  1. B

    Looking for a high quality engraved lincense plate frame company

    I bought one from cafe press. What a POS. I've had others that were engraved plastic and was very happy with them. This company sells junk! Any suggestions? I've looked on the back of my others, but they have no name. Thanks
  2. B

    I need Viper shirts. Lost a buncha fat and nothing fits, help!

    Thanks Mark. Staying fat woulda been a whole lot cheaper! BTW, who's CJ? and how would I contact him/her?
  3. B

    I need Viper shirts. Lost a buncha fat and nothing fits, help!

    Any sites you may recommend ? Thanks in advance.
  4. B

    Same ole rumor

    Just read 2017 will be the death of the viper, again! Couple of questions, how accurate is the latest rumor? Heard (I know) a supercharger will be offered . T or F?
  5. B

    Defroster/Air Conditioning FAN not working

    Jim, same thing happened to my 06. Water from cowl drains into rubber vent hose going to fan motor. Rusts fan motor shaft. Very easy to replace the motor, especially if your skinny, which I'm not. Think i bought mine from dealer. Check autozone and Napa, some parts for our cars are...
  6. B

    Lifter noise above 2500 RPM

    Noise update: removed pan, lots of areas to hold old oil, and much casting roughness. I polished inside floor, should help. No mettalic debri in pan or heads. Because of this, did not remove bearings. Plugs out, spun engine, all worked perfectly. Put it all back together and no more noise...
  7. B

    Lifter noise above 2500 RPM

    Bore scope, not horoscope
  8. B

    Lifter noise above 2500 RPM

    Update: removed oil pan, and baffle. No metallic particles, same as cylinder heads. Removed passenger side valve cover, same as driver side, appears perfect. Tomorrow I'll remove rod caps and mains one at a time, INSPECT bearings. Any suggestions from engine builders on a horoscope? Want one...
  9. B

    Upgraded sound system?

    Thanks all. Looks like a kicker sub and speakers are the way to go. Well, SS soon I locate/repair engine noise. Cdover, an 06 coupe.
  10. B

    Lifter noise above 2500 RPM

    Thanks, all lifters are moving properly, no broken springs or bent pus rods. Uh oh, pan is coming down, maybe bearing problem. Ratz
  11. B

    Lifter noise above 2500 RPM

    VPRPWRD they said 06's backordered. Mentioned it to Dan Gragin, stated it's because of supply mfgr.
  12. B

    Lifter noise above 2500 RPM

    Never mind, found him, calling now.
  13. B

    Lifter noise above 2500 RPM

    AZTVR, perfect, thank you. I'll call Dan G if you'll please supply his contact info.
  14. B

    Lifter noise above 2500 RPM

    Perfect, thanks.much. I'll call Dan G if you'll give me his contact.
  15. B

    Lifter noise above 2500 RPM

    Molar, this is very loud, sounds like just one. Yesterday I removed left valve cover, all looked and felt good. Just removed left valve cover. Waiting for my son to crank it while I watch rocker arms. Then I'll do the same for the other side.Called the dealer we do business with, oddly, lifters...
  16. B

    Lifter noise above 2500 RPM

    its an 06. Thanks for the replies, guess I gotta do it.
  17. B

    Lifter noise above 2500 RPM

    Ive also posted this question in the SRT section, I hope its permissible to add the question here also. I have a GEN 3 that just developed a lifter noise above 2500 RPM. No CEL, engine runs normally. Oil is full, clean and maintains normal oil pressure throughout RPM range. Removed driver side...
  18. B

    Lifter noise above 2500 RPM

    Just started happening. Oil is full and clean, engine maintains normal oil pressure. Sounds like possibly driver side. Removed Valve cover, its clean and all looks normal. Wondering if anyone has had lifter problems, and if a cam change is due, shop manual says to remove engine and remove...
  19. B

    Upgraded sound system?

    Suggestions on a good sounding system? Just CD and radio is all I need.
  20. B

    Suggestions for an HID fog light kit for a 2006 ??

    Hi all. Need to replace my HID fog light kit. One of the ballasts has failed. Had the 35 W 6000 set. Thanks, John
  21. B

    another post about windows raising too far on 06 coupes

    Thanks to all. Will order a new regulator Monday. Dan thank you for the warnings, too late! Broke the little black plastic strip on passenger side. Cheap good fix, get some black weatherstrip adhesive on a screwdriver blade. flat tip of course. Gently lift unbroken piece and slide adhesive under...
  22. B

    another post about windows raising too far on 06 coupes

    Before you ask or suggest, yes I did many searches for this problem and have read and performed some with zero success. My question is, has anyone gotten a definitive answer as to what causes and the fix for this problem? Seems kinda common so there must be someone out there with a fix that...
  23. B

    Cat delete pipes ... who did you use?

    I had modified the stock exhaust by removing all of the crossover system and just using the side pipes. After installing a Bellanger set of headers, we welded straight mufflers using 3inch pipes all the way to exit. After having this arrangement for a while, it was way too loud. Called Lou at...
  24. B

    Passenger window goes up too far

    quite a bit late, but thank you USMCLY, I'll try that.
  25. B

    clutch master cylinder failing?

    Hey Beerly, sorry it so long to respond, not on the computer much. Yes its the clutch master cylinder. Fairly easy to replace, I had my son do it!!! Remove right front tire inner fender panel and its right there. I forgot what the connection was under the dash, but removing the drivers seat...

Latest posts

Members online

Total: 1,508 (members: 8, guests: 1,500)

Forum statistics

Threads
153,647
Posts
1,685,251
Members
18,225
Latest member
Estespropaint

Share this page

Top