Search results

  1. V

    96 VS 97 GTS

    Also the stripes go all the way thru the rear license plate area, IMO which looks better. Also 96's are much faster! :headbang:
  2. V

    Under Hood Liner/Pad?

    I replaced mine, had a few holes in it, with a stock one. It was well under $200.00. Also go to a paint body shop & get all new clips,they are really cheap, and I bought the special tool for the clip removal. There must have been around 20 clips. It was real easy to remove them with the tool.
  3. V

    Zaino applied with orbital buffer, removed by hand? Any comments?

    If you're going to use the orbital I would use Meguiar's #9 Swirl Remover which is a cleaner & polisher at a setting of 3 or 4 & then the Meguiar's Gold Class wax. You'll be very safe at that. It's pretty hard to "burn" the paint with an orbital buffer. At the Nashville VOI the Meguiar's...
  4. V

    Too Close for Comfort... your thoughts please

    Looks like plenty of room to me. Mine are just as close & I shoot flames out about 5 foot from the tips without melting anything. Of course my stripes get a little discolored. :smirk:
  5. V

    Custom Header Gaskets- - - Help!!

    I don't know. They act like paper on the blow out spots. I guess there could be metal thruout. They are kinda pliable like metal but the outside surface is like a silver paper. The part # is 4848339 & cost me $16.15. Yes I tried torquing to factory specs & that still blew. Then I tried...
  6. V

    Custom Header Gaskets- - - Help!!

    I have been using the OEM Gen II gaskets I get right from the Dodge dealer. They are the ones that are junk, I'm telling you!!! They might work on stock or low pony cars but not on my +1000 degree headers. Thanks for the offer but no thanks on the OEM. I used to have the same problem on my vette...
  7. V

    Custom Header Gaskets- - - Help!!

    Can someone help me find someone who can make me custom header gaskets out of copper? I'm changing them like I change my socks. All I've been using is the stock gasket that comes with the car. Cheap paper! Yes, I've siliconed them & even sprayed them with that copper junk, none of which was...
  8. V

    Header choice field is REALLY crowded. How do you choose?

    I'd find the one that doesn't keep blowing header gaskets! :( What a pain!!
  9. V

    Newest custom interior by S/H

    Can you also do custom logos,etc. on the headrests or center console..like say Venom 1000 Twin Turbo? Or also can you do like blue stitching instead of black? Also how about colors? How close do they or could they match the car? Thanks! Pics look great!
  10. V

    Sidesill Sandblasting!

    For some reason pic didn't post but it's in the gallery under 1996.
  11. V

    Sidesill Sandblasting!

    I tried to brighten pic so you can see, but since I put on the side sill plates ( in black ) I have no had any chips so far. Just a thought! ;) http://vca2.viperclub.org/gallery/data/504/299Dsc00677_bright-med.jpg?6801
  12. V

    What is it with people who think the Viper doesn't handle and is only a 1/4

    Re: What is it with people who think the Viper doesn\'t handle and is only a 1/4 I think my car proves them totally wrong. Not only is it fast in the 1/4 mile but it handles like it's on rails on the road course. I put Penske's on all four corners & WOW :shocked: did it do wonders. Nobody...
  13. V

    Jet Hot Coating . ..

    Yes, don't bother. Mine chipped off like potato chips! First it got a fuzzy look to it then just started to flake off. Took only about 2 weeks. I just put my stock shields back on.
  14. V

    Idle Hang Revisited

    Ditto for my car as on Jim Davis's car.
  15. V

    Who's best on interior's?

    Re: Who\'s best on interior\'s? Dan, Where are you getting the turbo work done? It looks like on mapquest you are about 150 miles from me. I'd like to get the car interior done after November 1st 'cause that's when it gets parked for the winter but done before spring. So far, after much...
  16. V

    Who's best on interior's?

    Re: Who\'s best on interior\'s? Point taken on the Venzano :) I had the Viper out this weekend & what a blast! It ran like a charm! No racing lately, just around town & interstate.
  17. V

    Who's best on interior's?

    Re: Who\'s best on interior\'s? Thanks for the posts & especially the pics! I like Deweese's price, Venzano's price too high. How do I get a hold of Snake Hydes? I really like the idea of Vipermed's exchange program but I can't seem to get them to respond to my emails to them & get a...
  18. V

    Who's best on interior's?

    Who\'s best on interior\'s? I'm looking to do my interior over this fall/winter. Seats, knee bolsters, door panels, etc. in like a two tone black/blue combo. Who are the best & best prices? Thanks!
  19. V

    Can Oil come out of the Dip stick tube if the dipstick is not snapped in

    My 1996, 10,000 miles, dipstick was popping up all the time. Cheap fix is to plastic tie it down with a loop. I got sick of the looks so I got a dipstick screw top from Dillusi Motorsports ( about $25.00 ).Easy to install & it never pops up anymore. Good luck!
  20. V

    Hood Cut-Out?

    Got the hole cut in & everything done in less than 3 hours today. I used a drummel with cutout wheel. I took the hood off the car. Much easier to work on & no mess! Only 4 bolts. Need 2 or 3 people to take off. I didn't test it yet but will soon & let you know. The 5/16" black fuel...
  21. V

    Hood Cut-Out?

    Hey thanks guys for all the info. That's exactly what I was looking to do. I think the drummel might have a little more control than the sabre. Yes, the headers do throw a lot of heat & my feet get a little warm. Thanks!
  22. V

    ??Wheel cleaning question??

    Simple Green. Spray on & clean with very soft mit, then hose off. Do one wheel at a time. Yes wheels must be clear coated, I assume they are. Good Luck!
  23. V

    Hood Cut-Out?

    Thanks for the reply. That's no problem 'cause my car never sees rain. When I wash it I'll just put towels underneath like I do now for the Naca duct & fender vents.
  24. V

    Hood Cut-Out?

    I tried doing a search with no results. Has anyone ever cut out their hood under the driver side " Speaker Grille " to allow more cooling of the engine? It seems like a good idea for it's right above the header. If anyone did please explain how & maybe pics?
  25. V

    Autoform LeMans bumper, please post some pics

    Thanks for compliments & here's one back at you for your cars too! My wing is from Northwind Engineering. I have 4 quick release fasteners to take off the wing if I want to get into my back hatch because you can't open it. The wing is wide and the hatch only opens a few inches.

Latest posts

Members online

Total: 1,507 (members: 6, guests: 1,501)

Forum statistics

Threads
153,663
Posts
1,685,351
Members
18,254
Latest member
Puntacanaviper

Share this page

Top