Search results

  1. C

    Car bogging down

    I've had that happen! It was worst than bogging! It acts like the engine has no power at all. Glad it got fix under warranty but like a month afterwards I got rid of it by just putting mopar race exhaust. Now I don't have to worry lol
  2. C

    Hosting a meet July 21st

    You gotta make it! It's been like over two years since we last seen each other lol. Ur slacking! Haha kiddin. Hope to see ya there
  3. C

    Car bogging down

    I've had a bogging issues about an year and half ago when it was mostly stock with exhaust intake and tune. Turns out that when I put new plugs and wires in, it went away. I used the new AB wires and the stock champion plugs. How many miles on the car?
  4. C

    Didn't even had a chance to complete two laps at a HPDE event.

    No, you have not told me. I have to disagree with you. These pumps are junk. I already went through one and another viper owner I know went through two, on top of how many been replaced I've seen on here. These are suppose to help keep our engine cool, once they fail are are screwed if its a...
  5. C

    Didn't even had a chance to complete two laps at a HPDE event.

    It's not much of a hassle just the fittings to get to run a -6AN Teflon hose, PITA! no fittings I could find. I had to turn one fitting to make it seal on the rack and well a -6AN on the pump fitting then its all good. Get an 08+ fan and an dual control module to run both fans. The secondary...
  6. C

    Didn't even had a chance to complete two laps at a HPDE event.

    I went to a HPDE event today and it rained the first two session. Finally cleared up and got all ready for the third session. I did a build on the engine since last year from engine starvation. Forged internal, cam, etc. After the first lap of warm up and as soon as I started to get into it more...
  7. C

    Spin Control School

    I believe this 100%!! I saved my a$$ quite a few times by using the throttle. Easy answer. When the car gets out of control the normal brain reaction is to lift off the throttle. Weight transfers more to the front wheels which are now pointed in the direction of the slide. Hence you exit the...
  8. C

    Watch out for the new E15 gasoline.

    I have a friend that runs on E85 in his mits. EVO and creates a lot more power over straight gas. Down side Horrible cold start Smells funny (not bad but not good) Way worst milage (used to get like 30mpg and now maybe 21-22mpg) Prices are getting close to what straight gas cost It's a joke...
  9. C

    wraped rotor? ACR

    Another suggesting, did you switch pads on the same rotors? this can happen. I figured this out the hard way.
  10. C

    Dry sump

    Doesn't create vacuum.... there are so many different advantage over that compare to a swing arm. One is also that having a tank seperate from the engine keeps oil temps way down. In fact, I have a heater installed to help warm up faster. Average temp I seen on my oil was around 180-190 which is...
  11. C

    Could not get into my 03 Viper, Anyone else ever experiance this

    Agree, the key is like a door handle. Once the key is turned, it will pop the door open. I thought I was gonna snap my key but it didn't.
  12. C

    First meeting

    Will be there tomorrow :) No cruise in the viper tho. Still working on my dry sump system.
  13. C

    WTB: Gen 3 crank damper, pulley, bolt

    Thanks for the picture! I'm trying every effort not to remove the A/C. Where were you able to put the oil Tank? Best solution I found was right in front of the engine. I am switching to a Gen 4 rad fans to gain little room. Opps, I misread what you said but yes I know what you mean by turning...
  14. C

    WTB: Gen 3 crank damper, pulley, bolt

    Thanks for the catch! Okay, I can turn the seal around. The hub just catches the seal. My other option is to mill down the the hole for the seal to gain some room but turning the seal should be good. It's about .06 I need to gain. Do you know my any chance if someone may have a gilmer pulley...
  15. C

    WTB: Gen 3 crank damper, pulley, bolt

    Well I got the gen 4 damper. One problem, it sits tight against the seal so I found a exact size washer 18ga and it got enough to space out away from the seal. I now see that it's going to be a pita to route a belt to the location I plan on having the pump. I just need a day break on this. I...
  16. C

    Mopar "650HP" pkg installed

    I'd be pissed. Sure hope mopar works out the bug.
  17. C

    possible steering leak. anyone know how to make custom lines?

    I plan on customizing mine. I have a race shop close to me that has everything I need. I don't know how fast you need them but my viper is in storage for probably another month. Normally it's the pump but like others said, the lines can leak.
  18. C

    Which spark plugs?

    What cam are you running? I have the 710 cam from Roe and they suggested that I run Bosch Platinum +2 4308. When I was looking for them, they were discountinued but Roe racing had them in stock. They might be back in stores.
  19. C

    WTB: Gen 3 crank damper, pulley, bolt

    Yeah I got the picture on explore, I was on firefox ugh. Okay, that looks like what I really need! Would you happen to have the OD where you have the trigger wheel?
  20. C

    WTB: Gen 3 crank damper, pulley, bolt

    Yep I knew the difference but thought it could be interchangeable to a HTD pulley. You mean keyed for the HTD pulley correct? I can't get the picture :( I probably have to have facebook account for that right? I took mine off about a month ago.
  21. C

    WTB: Gen 3 crank damper, pulley, bolt

    I have dealt with him in the past and I believe he has poor communication through emails. I have asked for a yellow front bumper and he had one but I had to email him twice in order to get him to respond back with pictures. Thanks for your help tho. Okay, I don't get what ATI racing Tech...
  22. C

    WTB: Gen 3 crank damper, pulley, bolt

    Thanks for replying back to this. Now I'm glad you posted this. I am planning using the ATI racing but didn't know the offset is different. Explains why it comes with a pulley. I did talk to ATI racing and he told me my best bet is to use mandrel drive. The damper is too close to the engine to...
  23. C

    nerd on top gear Usa just said the Viper is not a real car ..

    I only saw the first episode and will be my last.
  24. C

    WTB: Gen 3 crank damper, pulley, bolt

    Sorry if this not suppose to be posted here but how many really look at the wanted ads? lol Like the title says! I've been really getting a move on my project and I rather not pull off anything from my viper. I know mine has the big crank damper bolt but I need the small one. This has to be in...
  25. C

    anyone has a junk gen 3 crankshaft and timing cover?

    Thanks! I'll give ya a call tomorrow evening after work

Latest posts

Members online

Total: 1,075 (members: 3, guests: 1,072)

Forum statistics

Threads
153,653
Posts
1,685,289
Members
18,237
Latest member
Polak

Share this page

Top