4 POST CAR LIFT GROUP BUY!!! MORE INSIDE. NOT A BAD DEAL.

[THOR]

ab - Another question that would help me, and probably others...

Once all is established, how "accurately" (key word) can the trucking company provide me (us) with a predicted delivery date & time? This will be especailly important when delivering to a residential location, so that appropriate means to unload the lift can be coordinated.

Thanx again for your assistance!!

 

[Qualitywires.com]

Hey Adam,
Is that shipping to a residence, or to a terminal, and we
need to bring it bring it home from there? I don't have a
really handy way of loading/unloading/transporting something that big, unless they can forklift to my driveway.

Anyone else in the Portland OR area getting in on this and
want to try to get a break on shipping?

If you don't have a way to take the lift off the truck, I would suggest a terminal where they have fork lifts. You will need a truck with a long enough bed to load it on or a trailer.

 

[Qualitywires.com]

ab - Another question that would help me, and probably others...

Once all is established, how "accurately" (key word) can the trucking company provide me (us) with a predicted delivery date & time? This will be especailly important when delivering to a residential location, so that appropriate means to unload the lift can be coordinated.

Thanx again for your assistance!!

From what I understand, once it leaves they will have a time and date. (obviously it will be an estimate)...

 

[chickenwarrior]

AB - I left you a voice mail. Thanks.

Tony

 

[BadVenm]

Sorry guys, but a Rotary lift is the ONLY way to go. You get what you pay for.

 

[Qualitywires.com]

Sorry guys, but a Rotary lift is the ONLY way to go. You get what you pay for.

You may be right so why don't you cover the difference on the cost of the lift for everyone so we can buy the Rev lift.

 

[2002_Viper_GTS_ACR]

Sorry guys, but a Rotary lift is the ONLY way to go. You get what you pay for.

You Da man ... (now where the hell is that jerking off icon ??)



Jon

 

[BadVenm]

Sorry to rain truth on the money saving parade, but I own a rotary lift not a junk lift.


After seeing the front half of a corvette in a dining room due to a cheap lift, just so some chump could $1,000.00 bucks or less, I chose to buy a real 4 post lift.

(Now, where is that icon of the ******* smashed under his car lift because he saved $800.00?)

Lockable at any height.

Like the old Bell Helmet ad said, "If you have a $10.00 head, then buy a $10.00 helmet."

 

[Fred(DrivingSchool)Kinder]

Rotary is a good lift. The best? Sorry there are a couple lift manufactures that service the automotive market. BendPak ( http://www.bendpak.com/default.isg?cPath=214 ) is just as good if not better than Rotary. Both are tested commercial standards to insure design and materials safety.

Also important both have a nation wide service organization. I know BendPak has a nationwide installation network. Basic considerations safety a given, functionality(how well the vehicle fits the lift), installation is very important as a good lift can fail due to poor or improper installation. Service if you have a problem who will fix it? How available are spare parts? Will the company be in business tomorrow?

But if you have a limited budget AB's lift may be ok? Without testing who knows? I hope that the installation is done properly and that the lift work well. Hate to see anyone hurt or have their car smashed.

 

[Joseph Dell]

gheesh... they are all the same thing... a lift is a lift. some may be heavier duty, but to slam one over the other as crap is a bit out of line.

rotary has the name.

JD

 

[J DAWG]

ab - couldn't you just build us all one?


So when is the deadline? I am thinking about buying one and getting it shipped to Mike's(AL).


Sorry if this has been covered, but what is the minimum ceiling height and I am still not clear what the width is? 79 inches ?



John

 

[scottgf]

Sorry guys, but a Rotary lift is the ONLY way to go. You get what you pay for.

You may be right so why don't you cover the difference on the cost of the lift for everyone so we can buy the Rev lift.

First off, I think AB has done a great job putting this deal together...Hope it all comes out ok.

Second, I have been leaning towards the Rotary because of its reputation, I may be wasting my $$, but peace of mind is worth it, and I happen to have enough $$ set aside to cover the extra cost.

Cheers,

 

[THOR]

ab - Confirmed, I would like two. One for delivery to 78750, and the second one to 75069. Thanx again for all your effort!!

 

[Marc Lublin]

I have a bendpak lift and I always love it when I see it on Monster Garage. They have had a few cars on it over the years.

 

[BobK898]

Fred, because of your original post on this thread, any warnings/advice that you give is colored by potential conflict of interest. Not a criticism, just an observation. Frankly, reading your "Dad" posts, are tiresome.

 

[RoadKing]

Thor - sent you a PM on combing shipment.

 

[jeffdai]

i was interested in a two post lift also. Is the car stable on a two post? Two post would be best for me because i have a large enough garage being built for the storage, i want a good lift to be able to take off the wheels and do brake work or rotate the tires. I have 12' ceilings, so i assume that would be tall enough? At most maybe cut a hole in the drywall for the posts?

 

[Marc Lublin]

Not too sure about rotating the tires on the Viper, don't think you want the rears up front or the other way around : )

 

[jeffdai]

haha might not work so well on my viper Would be nice for some of my other cars though. Although i did see a picture of a four post lift that had a jack stand on it, so you could still jack it up while its up and take the wheels off, that might be nice too. The four posts do look more stable.

 

[Jerry Dobson]

Jeffdai,

If you are having a new garage built, make sure the concrete is thick enough for a two post lift. You will want 6 to 8 inchs thick at 3500 PSI rated concrete.

Two post is not as stable as four post. If something heavy is removed (like a motor or tranny) from the car and the weight shifts...then it could fall. You just need to remember to brace the car during this type of work.

 

[Marc Lublin]

I love working on a car on a 4 post lift. I had never used a lift before in my life and it was a breeze pulling the motor on the Viper with the car on the lift. They are so sturdy that there is never a fear of anything bad happening, just remember to check the floor under the lift before you put it all the way down and hear a crunch (done that a few times to some tools and one phone)

 

[2002_Viper_GTS_ACR]

LETS GET THIS THING GOING !!

I BELIEVE NOW, I AM QUALIFIED TO ASK AGAIN WHEN ARE WE GOING TO GET THIS DONE!! (without Jay ball bustin') I HAVE MONEY IN HAND !! LETS DO THIS !!


Jon

 

[Qualitywires.com]

Today is the cut off day for the group buy on the complete hydraulic lifts.

So far we have the following people COMMITTED TO BUY:

1. Jon Avezedo....1 lift
2. Adam Brennan...1 lift
3. Joe Russell....1 lift
4. Thor...........2 lifts same delivery point
5. Scherzberg.....1 lift

The above people I know are 100% in that have contacted me. If I am missing you please just add your name to this thread.

If you are 100% sure...and want to know shipping cost please call 1-888-736-5094 to get it TODAY!

Email me at [email protected] with your full name and address with zip code and phone number. Also a email too. Very important that you do all of this BY SATURDAY MORNING.

I will give you my mailing address for send the check to me ($1650.00 PLUS SHIPPING) PLEASE DO NOT MAKE THE CHECK OUT TO ME , Make it out to Complete Hydraulic.

THIS THREAD IS FOR ORDERS ONLY NO DISCUSSIONS OR DEBATES!!!! I WILL CHECK THIS TONIGHT TO GET THE FINAL 100% COMMITTED PEOPLE.

MODS PLASE MAKE THIS STICKY...UNTIL MONDAY MORNING.

 

[RoadKing]

Ab,

You tossed me off the list. Waz up?

Add me back. I was trying to check with Thor to ship together.

RK

 

[Qualitywires.com]

Sorry Road King... Are you part of Thor's two lifts? Or is your's separate? Let me know.

1. Jon Avezedo....1 lift
2. Adam Brennan...1 lift
3. Joe Russell....1 lift
4. Thor...........2 lifts same delivery point
5. Scherzberg.....1 lift
6. Road King......1 lift


If you are not on this list, I am sorry, just let me know I have had a lot of tire kickers...so I am just trying to sort it out from the 100% committed people.

 

[Qualitywires.com]

1. Jon Avezedo....1 lift
2. Adam Brennan...1 lift
3. Joe Russell....1 lift
4. Thor...........2 lifts same delivery point
5. Scherzberg.....1 lift
6. Road King......1 lift
7. Bill O'Connell 2 lifts same delivery point (1) 4 post and (1) 2 post.

 

[Qualitywires.com]

100% Committed buys.

1. Jon Avezedo....1 lift
2. Adam Brennan...1 lift
3. Joe Russell....1 lift
4. Thor...........2 lifts same delivery point
5. Scherzberg.....1 lift
6. Road King......1 lift
7. Bill O'Connell 2 lifts same delivery point (1) 4 post and (1) 2 post.
8. Steamroller...2 lifts same delivery point

 

[Qualitywires.com]

100% Committed buys.

1. Jon Avezedo....1 lift
2. Adam Brennan...1 lift
3. Joe Russell....1 lift
4. Thor...........2 lifts same delivery point
5. Scherzberg.....1 lift
6. Road King......1 lift
7. Bill O'Connell 2 lifts same delivery point (1) 4 post and (1) 2 post.
8. Steam Roller...2 lifts same delivery point
9. Todd Wilhite...1 lift

 

[Qualitywires.com]

Hey guys what about the rest of you?? I NEED TO KNOW!!


Name-----------Zip Code----Shipping Cost---Lift cost---Total Delivered!

Ormberget-------78750----$325.00---------$1,650.00------- $1,975.00
Joe---------------24551----$250.00---------$1,650.00------- $1,900.00
Joe Ryan--------19067----$275.00---------$1,650.00------- $1,925.00
Mike-------------97229----$425.00---------$1,650.00------- $2,075.00
Vipernate-------93722----$425.00---------$1,650.00------- $2,075.00
Spencer---------75070----$300.00---------$1,650.00------- $1,950.00
DICKSOn---------21015----$275.00---------$1,650.00------- $1,925.00
Gordon----------78132----$325.00---------$1,650.00------- $1,975.00
Dr.Roof------------------$250.00---------$1,650.00------- $1,900.00

 

[2002_Viper_GTS_ACR]

Hey guys what about the rest of you?? I NEED TO KNOW!!


Name-----------Zip Code----Shipping Cost---Lift cost---Total Delivered!

Ormberget-------78750----$325.00---------$1,650.00------- $1,975.00
Joe---------------24551----$250.00---------$1,650.00------- $1,900.00
Joe Ryan--------19067----$275.00---------$1,650.00------- $1,925.00
Mike-------------97229----$425.00---------$1,650.00------- $2,075.00
Vipernate-------93722----$425.00---------$1,650.00------- $2,075.00
Spencer---------75070----$300.00---------$1,650.00------- $1,950.00
DICKSOn---------21015----$275.00---------$1,650.00------- $1,925.00
Gordon----------78132----$325.00---------$1,650.00------- $1,975.00
Dr.Roof------------------$250.00---------$1,650.00------- $1,900.00

CAN YOU SAY COMB OVERS ?? !! What a waste of time.... (just playing... kick down or piss off... ) (I'm saying it becuase I can, and I KNOW AB wants to say it, but is being PC).


Jon