Anchoring Harness ?

Topawam

Viper Owner
Joined
Sep 17, 2003
Posts
338
Reaction score
0
Location
Fort Lauderdale, FL
I just got this 6 points harness, and I am trying to install it.
I was wondering if I am missing two "hooks" for the crotch straps? I got the hooks for the side staps, the ones for the chest are not put on yet, but i got them, see pics.
Should I have two extras for the crotch straps?
You must be registered for see images

Thanks in advance.
 
Last edited:
OP
OP
T

Topawam

Viper Owner
Joined
Sep 17, 2003
Posts
338
Reaction score
0
Location
Fort Lauderdale, FL
Sorry, I edited my post, It is the crotch straps, the one that pass between the legs, My terms are probably not the exact terms...
 

SNKEBIT

Enthusiast
Joined
Sep 19, 2003
Posts
2,575
Reaction score
0
Location
western wisc.
they go the same place as the lap belts. You sit on the small belts. ((what you're calling crotch belts)
 
OP
OP
T

Topawam

Viper Owner
Joined
Sep 17, 2003
Posts
338
Reaction score
0
Location
Fort Lauderdale, FL
they go the same place as the lap belts. You sit on the small belts. ((what you're calling crotch belts)
Not sure of that...
Ok, I just checked other harnesses, and it seems I am missing those two hooks, if somebody has some to spare, please, pm.
Thx
 
Last edited:

steve911

Enthusiast
Joined
Sep 11, 2003
Posts
1,651
Reaction score
3
Location
Cottage Grove, Wi.
I would contact Schroth and emaail them the pic you posted. That would be the quickest way to get your parts plus the advice to get them in your car.
 

Fast Viper Dan

Enthusiast
Joined
Aug 7, 2001
Posts
457
Reaction score
0
Location
Saratoga, CA, USA
If you want to change to a single strap, there is a threaded insert in the floor in front of the seat. You will have to locate it and then cut a small hole in the carpet to mount your hook.
 

02 Graphite GTS

Enthusiast
Joined
Jan 31, 2006
Posts
796
Reaction score
1
Location
H. B. California
Hey Topawam,
Check out the "How To" section of the forum. http://www.viperclub.org/menus/index_how_illup.htm There is a step by step for the Team Tech 6 point harnesses. It is a very good step by step procedure and also provides a template for the cutout that needs to be made for the shoulder harnesses.

Looking at the picture you posted...it appears that you are indeed missing the 2 hooks that go on the end of the crotch strap. Did you get any eyebolts ? ( should be four of them ) You will also need spacers for the lower eyebolts...which TeamTech did not supply me, so I had to make some.

Lance
 

Latest posts

Members online

Forum statistics

Threads
153,644
Posts
1,685,209
Members
18,220
Latest member
ROIII
Top