Brown Color on my Speedo Plastic

Gearhead Adam

Enthusiast
Joined
Feb 9, 2011
Posts
29
Reaction score
0
Location
DFW
Not sure if anyone has this same thing, but its strange. See attached pic, my speedo has this brown color around the dial...has been that way since i got the car. Looks like a burn mark yet dash lights up at night normally, car has only even been used with headlights on a few times. any idea what caused it and more importantly how to clean it?
 

Attachments

  • viper speedo.jpg
    viper speedo.jpg
    93.6 KB · Views: 88

ba$$fan

Enthusiast
Joined
Dec 8, 2010
Posts
78
Reaction score
0
Location
Fort Worth
I see this post on the latest threads part at the top of the main forum page and it says:

Brown Color on my Speedo...



So...I recommend the wash machine.
 

Ratical2

Enthusiast
Joined
May 8, 2007
Posts
2,326
Reaction score
0
Location
San Jose, CA
That's funny guys!!! I didn't put brown on speedo together until you pointed it out!

To the OP, It looks like the rubber on the Trip Odometer Reset button is deteriorating. I don't think that there is much you can do except to take it apart and clean it or replace it.
 
OP
OP
G

Gearhead Adam

Enthusiast
Joined
Feb 9, 2011
Posts
29
Reaction score
0
Location
DFW
thanks ratical, any idea how to separate the plastic from the bezel or can that rubber piece be taken out/replaced without having to pull apart the dash?
 

Ratical2

Enthusiast
Joined
May 8, 2007
Posts
2,326
Reaction score
0
Location
San Jose, CA
thanks ratical, any idea how to separate the plastic from the bezel or can that rubber piece be taken out/replaced without having to pull apart the dash?

I haven't gotten into the dash on this car, so I don't know how difficult it is to take this gauge apart or if it is even possible. I am sure someone else has....we will have to wait to see what they say.

Good Luck!
 

agentf1

Enthusiast
Joined
Dec 27, 2001
Posts
2,608
Reaction score
0
Location
Phila Suburbs
Wow, that *****. I would try to plastic polish and hope it is just on the outside. That said I doubt you will be able to do anything short of replace it.
 
OP
OP
G

Gearhead Adam

Enthusiast
Joined
Feb 9, 2011
Posts
29
Reaction score
0
Location
DFW
Wow, that *****. I would try to plastic polish and hope it is just on the outside. That said I doubt you will be able to do anything short of replace it.

can you replace the plastic? the knob? what i DONT want to even bother with is having to put a whole new speedo in just for that...its really not a huge deal but i was curious as to what was causing it and now have that answer...
 

eucharistos

Enthusiast
Joined
Feb 15, 2008
Posts
6,845
Reaction score
2
Location
Houston
i never noticed it on my, so i don't know if it is there or not, but now i will have to look and will notice it if it is there :omg:

thanks alot :mad:



:lmao:



_________________________
While I am watching you....I am not preschool enough to say:
“Robert smells bad and looks worse” OR “Robert looks bad and smells worse”
 

Ratical2

Enthusiast
Joined
May 8, 2007
Posts
2,326
Reaction score
0
Location
San Jose, CA
Must be a Texas thing...
All that humidity and sunlight (UV) have accelerated the breakdown of the rubber causing it to stain the gauge face. I don't if it is leeching or out-gassing. If it is leaching into the gauge face, you won't be able clean it. If the transfer is by out-gassing, there is a possibility that you can wipe it off. It all depends how deep the stain penetrates the surface.
Hummmm,,,,,might have to rethink moving to Texas....j/k
 

Latest posts

Members online

Forum statistics

Threads
153,645
Posts
1,685,216
Members
18,221
Latest member
tractor1996
Top